Quantcast
Namespaces
Variants
Actions
Personal tools

Cornelius keg

(Difference between revisions)
Jump to: navigation, search
m (Using Cornelius Kegs)
m (Using Cornelius Kegs)
Line 15: Line 15:
 
==Using Cornelius Kegs==
 
==Using Cornelius Kegs==
  
At a minimum, all 5 [[O-rings]] should be replaced and the kegs should be filled with hot water/detergent over night (followed by sanitizer) before the first use.
+
At a minimum, all 5 [[O-ring]]s should be replaced and the kegs should be filled with hot water/detergent over night (followed by sanitizer) before the first use.

Revision as of 09:50, 3 October 2007

5 gallon "corny" kegs

A Cornelius keg or Corny keg is a type of keg originally manufactured by the Cornelius company for use in the soda industry. Now obsolete, they are easy to find used and popular with home brewers.

About Cornelius Kegs

These kegs are generally preferred by home brewers because they are well suited for storage in converted refrigerator or freezer kegerators and hold the typical 5 gallon batch of beer. These kegs can be found in used condition (often filled with residual CO2 pressure and a bit of old syrup) for a few dollars more than their worth in stainless steel scrap. 2 and 3 gallon versions are also available, although they are rarer than full-sized 5-gallon kegs.

Two different disconnect/coupling systems (ball-lock and pin-lock) were widely used and are NOT interchangable.

Using Cornelius Kegs

At a minimum, all 5 O-rings should be replaced and the kegs should be filled with hot water/detergent over night (followed by sanitizer) before the first use.