Hey all,
I'm getting rid of my brew system that I picked up from another member on these forums, cyberbackpacker. It's a great system, just bigger than I need. I bought it from him for 2700 and built the stand myself, also had the brew kettles TIG welded after I noticed some small leaks. The top part of the stand is bolted together and should be easily disassembled.
The electrics system consists of the BCS 462 element, enclosed in the panel he wired himself. I'm no expert on this but I have his schematic available and can add that later if you guys want to see it.
There are 2 25 gallon stainless steel kettles with sight glasses. I have a replacement sight glass included since I bumped one of them and the plastic cracked. It's still been functioning fine but i have a replacement ready.
The boil kettle/mash tun has a 5500w and 4500w heating element in the base of the kettle. The mash tun/HLT has a 4500w heating element in it.
There is a mash tube with a false bottom welded into it that sits inside one of the kettles, I've used it without problem in either kettle. Just depends how you want to use it. It's on a pulley system to move from the boil kettle to the HLT for a batch sparge.
There are 2 pumps attached under each kettle. I don't know much about them but can post later on request.
I'm offering the whole system for $3200 or best offer.
I'm located in Heyworth, IL which is just south of Bloomington. View attachment ImageUploadedByHome Brew1465094997.546357.jpgView attachment ImageUploadedByHome Brew1465095022.940146.jpgView attachment ImageUploadedByHome Brew1465095040.432227.jpgView attachment ImageUploadedByHome Brew1465095092.658712.jpg
I'm getting rid of my brew system that I picked up from another member on these forums, cyberbackpacker. It's a great system, just bigger than I need. I bought it from him for 2700 and built the stand myself, also had the brew kettles TIG welded after I noticed some small leaks. The top part of the stand is bolted together and should be easily disassembled.
The electrics system consists of the BCS 462 element, enclosed in the panel he wired himself. I'm no expert on this but I have his schematic available and can add that later if you guys want to see it.
There are 2 25 gallon stainless steel kettles with sight glasses. I have a replacement sight glass included since I bumped one of them and the plastic cracked. It's still been functioning fine but i have a replacement ready.
The boil kettle/mash tun has a 5500w and 4500w heating element in the base of the kettle. The mash tun/HLT has a 4500w heating element in it.
There is a mash tube with a false bottom welded into it that sits inside one of the kettles, I've used it without problem in either kettle. Just depends how you want to use it. It's on a pulley system to move from the boil kettle to the HLT for a batch sparge.
There are 2 pumps attached under each kettle. I don't know much about them but can post later on request.
I'm offering the whole system for $3200 or best offer.
I'm located in Heyworth, IL which is just south of Bloomington. View attachment ImageUploadedByHome Brew1465094997.546357.jpgView attachment ImageUploadedByHome Brew1465095022.940146.jpgView attachment ImageUploadedByHome Brew1465095040.432227.jpgView attachment ImageUploadedByHome Brew1465095092.658712.jpg