stainlessbrewer
Well-Known Member
Due to the shipping weight (25lbs) I would like to sell this locally or close to it (eastern North Dakota and western Minnesota).
For sale is my custom BIAB-style electric home brewing system. Designed for 2-3 gallon batches. Single vessel. 120V PID based temperature controller. 120V 2000W all stainless heating element. 12V quiet pump for recirculating during the mash if you like. Two temperature probes for the controller, one mounted in kettle and one mounted in the recirculation return in the kettle lid. Works in any GFCI protected 20A kitchen outlet. Easy all-grain brewing. Normally for BIAB (Brew In A Bag) style brewing you use a nylon mesh bag but I had a stainless mesh basket made for the kettle that will last a lifetime with minimal up keep. Bags are fine but sometimes hard to clean and can begin to come apart at the seams, this mesh basket is much better and cleans up easy. Kettle has all stainless parts including the valve bulkhead, 3-piece 1/2" ball valve and hose barb. Includes 2 pieces of 1/2" silicone tubing for recirculating and draining. One piece has an inline ball valve to control the recirculation flow. There is also an aluminum support to rest the basket on while it drains and a 1/2" thick poly round disk with handle for pressing the grains while they drain to get the most wort out of them as you can.
Over $350 invested and taken care of. Very nice.
Only selling because I have built a new small batch system and need to downsize for upcoming move.
$240 Not interested in parting it out and no trades please.
For sale is my custom BIAB-style electric home brewing system. Designed for 2-3 gallon batches. Single vessel. 120V PID based temperature controller. 120V 2000W all stainless heating element. 12V quiet pump for recirculating during the mash if you like. Two temperature probes for the controller, one mounted in kettle and one mounted in the recirculation return in the kettle lid. Works in any GFCI protected 20A kitchen outlet. Easy all-grain brewing. Normally for BIAB (Brew In A Bag) style brewing you use a nylon mesh bag but I had a stainless mesh basket made for the kettle that will last a lifetime with minimal up keep. Bags are fine but sometimes hard to clean and can begin to come apart at the seams, this mesh basket is much better and cleans up easy. Kettle has all stainless parts including the valve bulkhead, 3-piece 1/2" ball valve and hose barb. Includes 2 pieces of 1/2" silicone tubing for recirculating and draining. One piece has an inline ball valve to control the recirculation flow. There is also an aluminum support to rest the basket on while it drains and a 1/2" thick poly round disk with handle for pressing the grains while they drain to get the most wort out of them as you can.
Over $350 invested and taken care of. Very nice.
Only selling because I have built a new small batch system and need to downsize for upcoming move.
$240 Not interested in parting it out and no trades please.