Original Gravity Reading is Off - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Original Gravity Reading is Off

Reply
 
Thread Tools
Old 01-23-2009, 02:33 PM   #1
deion528
Recipes 
 
Jan 2009
Posts: 5


Just stated a Hoegaarden clone. The kit stated that the OG should be around 1.050, however I got mulitple readings from 1.010 to 1.030. Any ideas?



 
Reply With Quote
Old 01-23-2009, 02:48 PM   #2
Nurmey
I love making Beer
HBT_LIFETIMESUPPORTER.png
 
Nurmey's Avatar
Recipes 
 
Jul 2007
Omaha, NE
Posts: 3,983
Liked 30 Times on 26 Posts


It's pretty much impossible to not hit your target gravity with an extract kit because the amount of fermentables is set. However, wort and top off water are hard to mix thoroughly so your reading will be off because your sample is mostly top off water. The yeast will find all the sugars so it's not a problem.


__________________
Batch 1 Brewing
The American Revolution would never have happened with gun control.

 
Reply With Quote
Old 01-23-2009, 02:54 PM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


When I am doing an extract with grain recipe I make sure to stir for a minimum of 5 minutes (whipping up a froth to aerate as well) before I draw a grav sample and pitch my yeast....It really is an effort to integrate the wort with the top off water...This is a fairly common new brewer issue we get on here...

Don't sweat it..unless you under or over tipped off or the final volume for the kit was 5.5 as opposed to 5 gallons and you topped off to 5, that is more than likely the problem.

It doesn't mean anything...the wort and water will merge fine during fermentation.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 01-23-2009, 03:36 PM   #4
homebrewer_99
 
homebrewer_99's Avatar
Recipes 
 
Feb 2005
Atkinson (near the Quad Cities), IL
Posts: 17,792
Liked 131 Times on 98 Posts


I'd say it's not homogenized, like Revvy said...mix it a lot before taking your OG reading. Stirring in oxygen at this step is not a bad thing.
__________________
HB Bill

 
Reply With Quote
Old 01-24-2009, 03:21 PM   #5
deion528
Recipes 
 
Jan 2009
Posts: 5

Awesome, thank you guys for the info. It appears to be fermenting appropriately so we'll see.

Cheers.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
took original gravity reading @80 deg hydrometer help? bieb9er Extract Brewing 3 08-31-2009 02:08 AM
Original Gravity seems Low... burtybeer General Beer Discussion 7 12-31-2008 02:16 AM
I forgot to take an original gravity reading FabilaJ Beginners Beer Brewing Forum 6 03-20-2008 01:17 AM
High Original Gravity Reading 9999USMC Beginners Beer Brewing Forum 10 05-20-2007 02:28 PM
low original gravity? aweks All Grain & Partial Mash Brewing 11 09-26-2006 02:22 PM


Forum Jump