Ss Brewtech’s Biggest Baddest Holiday Giveaway Ever!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Afraid to drill
Thread Tools
Old 01-22-2009, 04:54 AM   #1
Feedback Score: 0 reviews
Join Date: Oct 2007
Location: Fairhaven
Posts: 48
Default Afraid to drill

I got all my parts in to make my tower kegerator. I have a Haier model bc 110 withthe freezer on top. I bent the freezer section down very carefully, now I have to drill or cut the top for my tower. I have to try the cornstarch and vodka trick, but if it doesn't work, anyone have any suggestions? I would hate it if I hit a line when drilling or attaching the tower with self tapping screws. Any help or advise would be greatly appreciated!

dockmasterjc is offline
Reply With Quote
Old 01-22-2009, 05:04 AM   #2
Feedback Score: 0 reviews
Join Date: Jan 2009
Location: Regina, Saskatchewan
Posts: 119

Some fridges don't even have a line running along the very top of them. Just do the cornstarch and vodca trick. Stay a good distance away from the line and relax! What I was actually planning to do was use the hole saw to drill the hole through the top layer, then stop and pull off the top layer and poke the insulation to check for any coolant lines.

As far as the screws for the tower go you should be able to position the screws at somewhere around 2,4,8, and 10 oclock. That way you won't have a screw as close as possible to the back of the fridge. Either way you should have lots of room to work with.
Trenchant is offline
Reply With Quote
Old 01-22-2009, 03:52 PM   #3
Feedback Score: 0 reviews
Join Date: Jul 2008
Location: Cape Girardeau, MO
Posts: 301
Liked 1 Times on 1 Posts


When I did mine I found it was quicker and easier to just feel the top of the fridge. Less than a minute after plugging it in, the line was pretty warm and easy to feel through the metal top.
yermej is offline
Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
I'm afraid my starter didn't start AZ_IPA All Grain & Partial Mash Brewing 24 07-24-2009 05:26 PM
Afraid of my Glass!!! Henny Equipment/Sanitation 20 02-11-2009 09:58 PM
Who is afraid of HSA? Baldy_Beer_Brewery Recipes/Ingredients 28 08-25-2008 07:25 PM
For all you that are afraid of O2... keg fermenting knipknup Bottling/Kegging 14 05-23-2007 07:13 PM
Houston, Be Afraid... El Pistolero General Chit Chat 9 11-17-2005 12:31 AM

Forum Jump

Newest Threads