Irish Coffin Box Question - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Irish Coffin Box Question

Reply
 
Thread Tools
Old 01-13-2009, 08:51 PM   #1
ISUBrew79
 
ISUBrew79's Avatar
Recipes 
 
Mar 2008
Iowa
Posts: 214
Liked 6 Times on 6 Posts



I am in the process of designing and building an Irish Coffin draft box to put on the top of my Oster 5.0 kegerator. Can anyone tell me what the distance between the hole for the shank to the top of the bar surface or drip tray should be? I think 9 or 10 inches would be sufficient clearance unless I was trying to fill larger vessels like pitchers or growlers.
__________________
College Creek Brewing Company, est. 2008
Primary: Belma/Cascade Pale Ale, Cranberry Melomel
Secondary: None
Bottled: Imperial Pumpkin Ale, Founder's Breakfast Stout Clone

On Tap:
Keg 1: Belgian Table Beer
Keg 2: Belgian Tripel

 
Reply With Quote
Old 01-13-2009, 09:49 PM   #2
Dude
Will work for beer
HBT_LIFETIMESUPPORTER.png
 
Dude's Avatar
Recipes 
 
Jan 2005
Knob Noster, Missouri
Posts: 8,770
Liked 87 Times on 70 Posts


When I built mine, I made the holes 10 inches. However, I have a bar mat underneath that is nearly an inch thick. Still only with 9 inches, a pint glass fits underneath no problem. I have a stout tap on one of my openings, and you don't even have to tilt a glass to get it under that.

So I'd say 9 inches would be fine.
__________________
On Tap: Lake Walk Pale Ale -- Eternity (Raspberry Stout) -- Nutrocker -- Donnybrook Dark
Primary: Lake Walk Pale Ale
Secondary: Summit IPA
Up Next: Smoked Porter -- Pub Ale -- Watermelon Wheat
Planning:
Gone But Not Forgotten:

www.IronOrrBrewery.com

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another Nail in the coffin for Mild. Orfy Commercial Brew Discussion 12 09-10-2009 06:06 PM
Irish Coffin Builders Dwain Kegerators & Keezers 0 07-31-2009 06:06 PM
Irish Coffin Box mrbowenz Equipment/Sanitation 15 12-09-2008 02:23 PM
Irish Red question Needsanamebrewery Recipes/Ingredients 6 10-17-2008 05:51 PM
Irish Moss Question colinwollmann All Grain & Partial Mash Brewing 4 05-31-2007 08:06 PM


Forum Jump