My through the wall tap project... - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > My through the wall tap project...

Reply
 
Thread Tools
Old 01-12-2009, 10:47 PM   #1
underwaterdan
Recipes 
 
Dec 2008
Long Island, NY
Posts: 325
Liked 1 Times on 1 Posts



I have looked a lot of places and have found pictures but no real guide on how best to do this... So if someone can point me in the right direction I would appreciate it.

- I am going to run a 4 foot beer line from my fridge to a tap mounted on a wall(room behind the fridge) . I am not sure what is best to run the beer line in, PVC, wood box lined with insulation, dryer duct... etc. I am kinda at a loss here.

- How is best to mount the tap to the wall, I assume cut out a section of sheet rock, replace with wood and use that. I don't really want to but I assume if I don't condensation will build up on the sheetrock causing problems.

This will all be done this week(friday is the party :-)) I will have plenty of pictures throughout too - but I could use some pointers

Final product to look something like this(minus the actual bar, I have a different setup)

Reason: Pic added

 
Reply With Quote
Old 01-12-2009, 10:54 PM   #2
Deacon240
Recipes 
 
Nov 2008
Southern Oregon
Posts: 271

If I where you I'd build a nice wood box for it to dispense from and set it into the wall. It'll look nicer and you could have a drip tray on it... Looking forward to the build!
__________________
Two Raven Brewery
[Is finally brewing again!]

Primary1: Envy - Green Tea Wheat (4/11/09)
Secondary: Schwarzbier Kit (1/11/09)
Bottle Conditioning: None ATM
Drinking: None ATM
Up Next: Lemon Honey Pilsner (est. unknown)

 
Reply With Quote
Old 01-12-2009, 10:57 PM   #3
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


There is a thread on here where someone put a chest freezer in the adjacent room and ran the beer lines through some sort of insulated path to a wall mount. I cannot remember who, but I'll keep looking.

One thing I do know is that you'll want more than 4' of beer line to balance the system. (You can keep the majority of it coiled up in your kegerator so it doesn't have to run through the conduit). Start with at least 10'.
__________________
Make Beer, Not War.

 
Reply With Quote
Old 01-12-2009, 10:59 PM   #4
underwaterdan
Recipes 
 
Dec 2008
Long Island, NY
Posts: 325
Liked 1 Times on 1 Posts


Quote:
Originally Posted by McKBrew View Post
One thing I do know is that you'll want more than 4' of beer line to balance the system. (You can keep the majority of it coiled up in your kegerator so it doesn't have to run through the conduit). Start with at least 10'.
Yes I have 15 feet alloted(won't need it all) I meant to say it is a 4 foot run from fridge to tap.

 
Reply With Quote
Old 01-13-2009, 12:15 AM   #5
underwaterdan
Recipes 
 
Dec 2008
Long Island, NY
Posts: 325
Liked 1 Times on 1 Posts


Anything think I could use this and make a box out of it, maybe 2" by 2" and tun my lines in there?

Reason: Added URL

 
Reply With Quote
Old 01-13-2009, 12:22 AM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,193
Liked 1654 Times on 1069 Posts


You can also get trip tray that has a tall backsplash. You can mount that right to sheetrock and drill holes in it. Either that or you can make a decorative board with routed edges and nice stain to mount the shanks into. On the rear, you do want to have a box and I'd recommend running a cold air loop with some flexible conduit. The beerlines would run in there and a fan would blow cold air in from your kegger.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 01-13-2009, 01:54 AM   #7
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


I really wish I could find that thread for you. I think it will help you out. Anybody out there remember the one I'm talking about? Chest freezer on one side of the wall, taps come out into the kitchen. I think the guy writes the beer names on a chalkboard.

Just trying to trigger some memories here.
__________________
Make Beer, Not War.

 
Reply With Quote
Old 01-13-2009, 02:13 AM   #8
underwaterdan
Recipes 
 
Dec 2008
Long Island, NY
Posts: 325
Liked 1 Times on 1 Posts


Quote:
Originally Posted by McKBrew View Post
I really wish I could find that thread for you.

Just trying to trigger some memories here.
I appreciate you looking - I tried so many search terms without much luck! I think I might go with the foam board from the fridge to the wall...

 
Reply With Quote
Old 01-13-2009, 05:25 AM   #9
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,193
Liked 1654 Times on 1069 Posts


The username is Kal.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 01-13-2009, 05:43 AM   #10
salzar
Recipes 
 
Jun 2007
Riverside Ca
Posts: 99
Liked 2 Times on 2 Posts


I am dumb
need more letters

Reason: -I am stupid-

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kegerator behind wall jakeshivers Bottling/Kegging 4 11-04-2009 03:48 PM
found these in the wall springer Home Brewing Photo Forum 10 10-10-2008 08:40 PM
Wall-E WillPall General Chit Chat 39 07-02-2008 01:09 PM
Wall flange? Khirsah17 Bottling/Kegging 1 12-15-2007 04:23 PM
Up against the wall! david_42 Equipment/Sanitation 4 06-11-2006 11:24 PM


Forum Jump