Airlock keeps losing liquid ? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Airlock keeps losing liquid ?

Reply
 
Thread Tools
Old 12-31-2008, 04:47 PM   #1
dragonspeedster
Recipes 
 
Nov 2008
Michigan
Posts: 40


I have IPA in secondary for 10 days now last two days airlock has became low (3 piece airlock). I used vodka for this batch as well as for the apfelwein sitting next to it. My previous batches i used sterilized water. I re-filled up the airlock to line once already. Rubber stopper seems very tight and once I refill to line center float eventually lifts to top.

Is this simply due to evaporation, water did not do this?

Also should I continue to fill up the airlock with more Vodka?

Any advice would be great

Thanks in advance

 
Reply With Quote
Old 12-31-2008, 04:50 PM   #2
scinerd3000
 
scinerd3000's Avatar
Recipes 
 
Mar 2008
Milton, De
Posts: 2,127
Liked 11 Times on 11 Posts


personally i use starsan but vodka works for many. Im under the impression that if temperature changes, you can get some suckback through the airlock. Usually this doesnt happen with glass carboys but i dont know what your using...and yes you deffinitly want to keep the airlock "sealed" so as to prevent anything getting in.
__________________
On Hiatus: Brewing at work....

 
Reply With Quote
Old 12-31-2008, 04:51 PM   #3
dragonspeedster
Recipes 
 
Nov 2008
Michigan
Posts: 40

5 Gallon Glass Carboy, #7 Rubber Solid Stopper, and 3 piece Airlock

 
Reply With Quote
Old 12-31-2008, 04:57 PM   #4
Parker36
 
Parker36's Avatar
Recipes 
 
Sep 2007
Lesotho
Posts: 4,742
Liked 22 Times on 20 Posts


Quote:
Originally Posted by dragonspeedster View Post
5 Gallon Glass Carboy, #7 Rubber Solid Stopper, and 3 piece Airlock
So no suck back. It is probably just because the air is dryer in the winter (in most places, don't know where you are) so that lends itself to evaporation more. That coupled with alcohol being more volatile than water is probably your culprit. (not necessarily in that order) I used everclear in my airlock once, it was gone within two days

 
Reply With Quote
Old 12-31-2008, 05:02 PM   #5
dragonspeedster
Recipes 
 
Nov 2008
Michigan
Posts: 40

I'm in Michigan... It definitely cold here.

Do I ADD More to the Airlock or just leave it?????

Also how can I tell if it IS or ISN'T suckback?

 
Reply With Quote
Old 12-31-2008, 05:08 PM   #6
Parker36
 
Parker36's Avatar
Recipes 
 
Sep 2007
Lesotho
Posts: 4,742
Liked 22 Times on 20 Posts


Yes, add more to the airlock. You want it to be up to that little etched line.

Suck back happens if there are either temperature or barometric pressure fluctuations. It is caused by the fermenting vessel changing shape. Think if you squeeze something, it will shoot air out, but when you let go, it will suck back in. Since glass carboys are pretty much solid and won't change shape, it generally doesn't happen to them. It can happen to buckets, though, which is why vodka or starsan are both recommended since they will not hurt the end taste of the beer or kill the yeast. Bleach would be better at keeping the nasties out, but DO NOT use it since the risk of it getting into your beer and ruining it (and possibly your insides) are too great.

 
Reply With Quote
Old 12-31-2008, 05:14 PM   #7
dragonspeedster
Recipes 
 
Nov 2008
Michigan
Posts: 40

Thanks all ! I love this site !!!

 
Reply With Quote
Old 01-01-2009, 01:53 PM   #8
fratermus
 
fratermus's Avatar
Recipes 
 
Feb 2008
75081
Posts: 1,188
Liked 3 Times on 2 Posts


If you want to be sure no suckage is occurring, try using an S-type airlock next time. The 3pcs are the suckback monsters in my experience.

I do suspect evaporation, though, particularly if it was bubbling pretty good.

 
Reply With Quote
Old 11-26-2011, 02:24 PM   #9
freflyr
Recipes 
 
Nov 2011
Virginia Beach, VA
Posts: 7

Quote:
Originally Posted by Parker36 View Post
Yes, add more to the airlock. You want it to be up to that little etched line.

Suck back happens if there are either temperature or barometric pressure fluctuations. It is caused by the fermenting vessel changing shape. Think if you squeeze something, it will shoot air out, but when you let go, it will suck back in. Since glass carboys are pretty much solid and won't change shape, it generally doesn't happen to them. It can happen to buckets, though, which is why vodka or starsan are both recommended since they will not hurt the end taste of the beer or kill the yeast. Bleach would be better at keeping the nasties out, but DO NOT use it since the risk of it getting into your beer and ruining it (and possibly your insides) are too great.
I am curious about this as well. I am about to bottle 2 batches with 4 weeks in the primary. One in a bucket and one in a carboy. The 3 piece airlock on the glass carboy has gone dry two times in the last week and the bucket has not lost any liquid. They have been generally about 70 degrees, but have some fluctuation between 65--73, so I think they should be ok there. These are my first 2 batches in about 15 years, so I am hoping for some early successes!

 
Reply With Quote
Old 11-26-2011, 03:47 PM   #10
NOISEpollution
Recipes 
 
Nov 2011
Orlando, FL
Posts: 120

There was a great thread on here the other day about filling an airlock. Who knew there was a technique to it?

Basically, for a three piece you want to fill a bowl with sanitizer solution, disassemble the airlock, and submerge all three pieces in the solution. Assemble the airlock while it's completely submerged under water. When you take it out of the solution it will drip until it reaches the appropriate level. Put it in the fermenter. If the level is still low then top it off with more solution. It should stay and there shouldn't be any suck back.

If that doesn't work, check for cracks in the airlock.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Liquid in the airlock - Paranoia! Shahn Beginners Beer Brewing Forum 17 02-10-2010 05:53 AM
Might be losing my job soon. bernerbrau General Chit Chat 38 03-11-2009 07:18 PM
Airlock fills up with liquid & foam kingoslo Equipment/Sanitation 8 02-23-2009 10:42 PM
No liquid in airlock dutchboy62 Cider Forum 5 01-04-2009 03:41 AM
liquid condensing in airlock? seven77 Equipment/Sanitation 15 02-16-2005 01:39 AM


Forum Jump