Sankey parts - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Sankey parts

Reply
 
Thread Tools
Old 05-16-2006, 02:10 PM   #1
Nate
 
Nate's Avatar
Recipes 
 
Nov 2005
Virginia
Posts: 700
Liked 21 Times on 16 Posts



Anyone know where to get parts for Sankey valves? Basically just retaining rings and O-rings...

Thanks in advance.
__________________
http://www.jackieboybrewing.com

 
Reply With Quote
Old 05-17-2006, 04:56 PM   #2
mrkrispy
Recipes 
 
Apr 2006
Posts: 60

micro matic has them all. You have to go:

keg couplers--> pick the type of coupler you have --> then click the "Replacement Parts" tab.

 
Reply With Quote
Old 05-18-2006, 12:32 AM   #3
Nate
 
Nate's Avatar
Recipes 
 
Nov 2005
Virginia
Posts: 700
Liked 21 Times on 16 Posts


Appreciate the response but not looking for the coupler parts... need the Sankey valve parts (in the keg). I basically abuse the retaining rings when reinstalling them and the O-rings just need periodic replacement.
__________________
http://www.jackieboybrewing.com

 
Reply With Quote
Old 05-18-2006, 05:23 AM   #4
Lounge Lizard
 
Lounge Lizard's Avatar
Recipes 
 
Nov 2005
Texas
Posts: 548
Liked 1 Times on 1 Posts


Northern Brewer has the orangish silicone bulkhead O-ring for like two bucks. I think you get two of them for two bucks. Don't know what you mean by retaining rings.

Now if you are talking about parts that fit INSIDE a Sanke installed ball valve, I have no idea. Are there even any other-than-metal parts inside ball valves?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How much CO2 for Sankey? JPicasso Bottling/Kegging 4 03-17-2009 08:32 PM
sankey keg jcalisi Bottling/Kegging 4 02-18-2009 03:23 AM
Off taste from Sankey tap? cpbergie Bottling/Kegging 1 12-11-2007 07:33 PM
5 Gallon Sankey landhoney Equipment/Sanitation 8 08-09-2007 08:14 PM
ive got a sankey keg...now what??? Ivan Lendl Equipment/Sanitation 20 03-10-2006 01:30 AM


Forum Jump