$20 Kegerator Project - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > $20 Kegerator Project

Reply
 
Thread Tools
Old 12-11-2008, 07:16 PM   #1
Cpt_Kirks
Recipes 
 
Sep 2008
Lakeland TN
Posts: 3,723
Liked 47 Times on 41 Posts



(Well, it will be a LITTLE more than $20.)

I'm off 11 days for xmas, so I need a project to keep me off the kegs occasionally (three will be online, with a fourth coming online).

I was at Home Depot, and they have the huge, 4x8 sheets of 2" pink foam for $22. I have a spare 1.7cf fridge in the attic, so I'm thinking of trying a kegerator idea I mentioned earlier.

I'm going to make a foam box big enough for 4 kegs, or two 6 gallon Better bottles. One side will have a hole big enough to mate up with the little fridge (with the fridge door removed). The tight fitting foam top will be removable for access to the kegs. I am working on ideas for a trap door in the lid that will allow access to the party taps without removing the lid. I am going to use glue and aluminum tape (REAL duct tape) to hold it all together.

Since I have the kegging setup and fridge, the cost will not be much more than $20. This will probably only be a temporary kegerator, to keep from having to go into the cold garage for a pint from the big fridge out there.

When I track down a cheap CL freezer, I'm going to build a keezer. Then, this foam rig will become a nice fermentor.



 
Reply With Quote
Old 12-11-2008, 08:29 PM   #2
pen25
Recipes 
 
Jun 2008
tulsa, ok
Posts: 976
Liked 2 Times on 2 Posts


American Science & Surplus : Electric Styro Knife best 14 bucks i spent. its 20 now but its worth it. if you have a hobby lobby around they have the things there.


__________________
from or living in oklahoma? come join us in the oklahoma group

 
Reply With Quote
Old 12-11-2008, 09:02 PM   #3
EdWort
HBT_LIFETIMESUPPORTER.png
 
EdWort's Avatar
Recipes 
 
Jul 2006
Bee Cave, Texas
Posts: 11,914
Liked 336 Times on 169 Posts


You might want to try a cheap surplus fan inside to circulate the cold air.

 
Reply With Quote
Old 12-11-2008, 10:03 PM   #4
Cpt_Kirks
Recipes 
 
Sep 2008
Lakeland TN
Posts: 3,723
Liked 47 Times on 41 Posts


Quote:
Originally Posted by EdWort View Post
You might want to try a cheap surplus fan inside to circulate the cold air.
Great minds think alike.

I was thinking about a muffin fan attached to the freezer, blowing into the keg area. The nice thing about those muffin fans is that, even though they are rated for 12 volts, they will run on 7.5 volts. It does the job of moving the air, but is almost completely silent. Those cheap, wally world wall-wort adjustable power supplies have a switch position for 7.5v.

 
Reply With Quote
Old 12-11-2008, 10:40 PM   #5
pen25
Recipes 
 
Jun 2008
tulsa, ok
Posts: 976
Liked 2 Times on 2 Posts


i used the 120mm fan running 5 volts. ill try to take some pics this weekend and post them
__________________
from or living in oklahoma? come join us in the oklahoma group

 
Reply With Quote
Old 12-12-2008, 02:39 AM   #6
Cpt_Kirks
Recipes 
 
Sep 2008
Lakeland TN
Posts: 3,723
Liked 47 Times on 41 Posts


Quote:
Originally Posted by pen25 View Post
i used the 120mm fan running 5 volts. ill try to take some pics this weekend and post them
Was it a 12v fan? I didn't think they would run on less than about 6v.

I would appreciate the pics.

 
Reply With Quote
Old 12-15-2008, 03:29 PM   #7
MikeRLynch
 
MikeRLynch's Avatar
Recipes 
 
Nov 2006
Connecticut
Posts: 888
Liked 11 Times on 10 Posts


This is exactly what I was planning to do, except I was going to use it for a fermentation chamber, not a kegerator.

The reason being I don't think the little 1.7 fridge has the power to get that big of an area down cold enough. Or, even if it could, it would have to cycle on a hell of a lot in order to get it down and keep it there.

I figure it can handle getting the chamber down to 65-67 a lot easier, and won't have to cycle on nearly as much. I was also thinking of getting a small fan (walmart) and plugging that into the same extension cord the fridge is plugged into. That way, when the Ranco turns on the fridge to cool things, down the fan flips on as well. The fan will probably fit in the doorway of the fridge nicely.

I'll post some pics once I get some money again. (Christmas is a terrible holiday...)
__________________
Lost Elm Brewing Co.
Stafford Springs, CT

Follow us on Twitter
Like us on Facebook

 
Reply With Quote
Old 12-15-2008, 04:16 PM   #8
Cpt_Kirks
Recipes 
 
Sep 2008
Lakeland TN
Posts: 3,723
Liked 47 Times on 41 Posts


The 1.7cf fridges supposedly use the same compressor as the larger, 4cf or so fridges, about 390 BTU.

Some here who have adapted a 1.7cf fridge for use as a fermentation chamber have said they lowered the temp to about 35* without any issues.

 
Reply With Quote
Old 12-15-2008, 09:26 PM   #9
pen25
Recipes 
 
Jun 2008
tulsa, ok
Posts: 976
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Cpt_Kirks View Post
Was it a 12v fan? I didn't think they would run on less than about 6v.

I would appreciate the pics.
yes standard 120 muffin fan. it will run all the way down to 1 volt. granted it wont be turning very fast. just bought a new cam sat and didnt get a chance to take any pics. when i put the fan in i was able to keep my temp consistent to 35* with 3 kegs. remember my fridge is also a bigger fridge. i was mistaking this thread with another thread but same would apply. put the fridge up high to the cold drops into the chamber.
i found some taken with my other cam. sorry about the clarity.
http:[email protected]..78879/sizes/m/
http:[email protected]..77183/sizes/m/


__________________
from or living in oklahoma? come join us in the oklahoma group

Reason: pics arnt displaying correctly

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Kegerator Project scinerd3000 Kegerators & Keezers 39 12-01-2009 05:08 AM
For my next DIY project... new kegerator John Beere Kegerators & Keezers 14 10-22-2008 08:13 PM
My Kegerator Project Ed_Savage Bottling/Kegging 22 02-26-2008 01:40 AM
My Kegerator Project JnJ Kegerators & Keezers 27 12-16-2007 03:03 PM
my new kegerator project!!! HighPlainsDrifter Bottling/Kegging 18 06-01-2007 10:47 PM


Forum Jump