How to make a stencil for my logo - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Label Display & Discussion > How to make a stencil for my logo

Reply
 
Thread Tools
Old 11-19-2008, 11:45 PM   #1
Yunus
HBT_SUPPORTER.png
Recipes 
 
Apr 2008
Frederick, MD
Posts: 546
Liked 2 Times on 2 Posts



Ok, my logo is pretty simple. http://i22.photobucket.com/albums/b350/yunus89115/3.jpg
I'm going with that or something close to it. I want to etch/frost some pint glasses with it, to do so I need a stencil. Anyone know of an easy way to make a stencil for that? It willl just be the circle with the letters, no background clouds or anything. I have a fair amount of resources I can use, laserjet, inkjet, gerber machine sticker paper(I can use the gerber machine but I can't get that font into the machine). I just can't think of a good way to make the stencil short of an exacto knife and a bunch of careful cutting. Any suggestions would be great.

Thanks!

 
Reply With Quote
Old 11-20-2008, 05:25 AM   #2
Thwizzit
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Feb 2008
Posts: 318
Liked 2 Times on 2 Posts


I'm not sure how a Gerber machine works but I think you'll need to extend the letters (or shrink the circle) so that the letters touch the sides wherever possible. Otherwise, you will have floating letters or you will need two stencils. One for the circle and one for the letters and then you will have to make sure they are lined up etc.

If you can't use the Gerber I don't think it would take all that much careful cutting with such a simple label.
Click image for larger version

Name:	aa-stencil.jpg
Views:	1514
Size:	16.2 KB
ID:	8546  

 
Reply With Quote
Old 11-20-2008, 06:05 AM   #3
eriktlupus
 
eriktlupus's Avatar
Recipes 
 
Jan 2007
Cereal City, USA
Posts: 2,618
Liked 13 Times on 11 Posts


check out your local hobby store for stencil material. i found a reusable one at micheal's in the glass paint section
__________________
primary1 :UTOPIA BABY(still searching for it)
secondary:middling bastard ipa
kegged:simcoe blonde, crystal pale ale, yellow jacket golden ale, lemon shandy blonde
DRINKIN DAWG BREWERY
LET'S GO RED WINGS


join michigan mashers here

extraction calculator
grains in pounds(G) X 36(average points per gallon of grains) / batch size in gallons(g) = maximum efficiency(ME)
OG / ME = brewhouse efficiency

 
Reply With Quote
Old 11-20-2008, 01:04 PM   #4
Yunus
HBT_SUPPORTER.png
Recipes 
 
Apr 2008
Frederick, MD
Posts: 546
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Thwizzit View Post
I'm not sure how a Gerber machine works but I think you'll need to extend the letters (or shrink the circle) so that the letters touch the sides wherever possible. Otherwise, you will have floating letters or you will need two stencils. One for the circle and one for the letters and then you will have to make sure they are lined up etc.

If you can't use the Gerber I don't think it would take all that much careful cutting with such a simple label.
Good point! The gerber machine is basically a machine that is used to make stickers for equipment. When you vehicles with graphics on them, it is likely that a gerber machine did the cutting. But your right when you pull the sticker or in this case the reverse sticker off so you can etch the letters it would need to be separate from the circle.

 
Reply With Quote
Old 11-21-2008, 05:03 AM   #5
denimglen
 
denimglen's Avatar
Recipes 
 
Feb 2006
Auckland, New Zealand
Posts: 438
Liked 1 Times on 1 Posts


Only way I can think of doing it is to laser print onto some acetate and cut it out.

Or you could go to a formed shape screen printer and have them printed, possibly with a mask or etch resist instead of ink, but I don't think that would be cheap.

 
Reply With Quote
Old 11-21-2008, 06:03 AM   #6
Bigpete9000
Recipes 
 
May 2007
Tempe, AZ
Posts: 54

here is how to do a simple photo etch.


__________________
Primary #1: None
Primary #2: None
Conditioning: None
Keg: Export 80
Drinking: Everything

 
Reply With Quote
Old 11-21-2008, 03:00 PM   #7
Hokie
Recipes 
 
Feb 2008
Arlington, VA
Posts: 174
Liked 6 Times on 4 Posts


Or the easiest way possible:
EZScreenPrint
I've used this stuff to make t-shirts and it works flawlessly, with no weird chemicals and only a minute in bright sunlight. I tried silk-screening bottle caps, but it was more trouble than it was worth.

 
Reply With Quote
Old 11-21-2008, 03:10 PM   #8
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3189 Times on 1884 Posts


Quote:
Originally Posted by Hokie View Post
Or the easiest way possible:
EZScreenPrint
I've used this stuff to make t-shirts and it works flawlessly, with no weird chemicals and only a minute in bright sunlight. I tried silk-screening bottle caps, but it was more trouble than it was worth.

Hokie, do you know if the stencil material would hold up to glass etching cream? I've been looking for a cheap and easy stencil creation material for etching on my own glasses, and even on beer or wine bottles.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 11-21-2008, 03:49 PM   #9
Hokie
Recipes 
 
Feb 2008
Arlington, VA
Posts: 174
Liked 6 Times on 4 Posts


According to the product description for the "HiRes" version of the sheets they say, "PhotoEZ HiRes silk screen stencil sheets are recommended for detailed images, finer lines, halftones, or glass etching." So I'd think normal use of the glass etching cream should work out just fine. You really only need to apply the cream, then you can probably remove the stencil right after and wash it while leaving behind the cream on the glass.
The stencil is definitely not made with any natural fiber, so I think it's probably a little more resilient than normal silk-screening material.

 
Reply With Quote
Old 12-05-2008, 11:29 PM   #10
tmoney1224
Recipes 
 
Dec 2007
Wichita, KS
Posts: 246
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Revvy View Post
Hokie, do you know if the stencil material would hold up to glass etching cream? I've been looking for a cheap and easy stencil creation material for etching on my own glasses, and even on beer or wine bottles.
It does revvy, I've used it. They have a hi-res and a standard-res sheet, basically the hi-res just has smaller and more holes the cream can get threw. It works pretty well, if it is smaller lines and really intricate it can be a little tougher to get it to come out right.

I've got some pics at home, I will try to remeber to post them.
__________________
Standing Eight Brewing
Always up for another round

Primary 1: Milk Stout
Primary 2: Fizzy Yellow Beer
Primary 3: Boulevard Wheat with a twist
Planning: 1554 Clone

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My First Stencil on a Keg BakerStreetBeers Label Display & Discussion 9 10-15-2012 08:43 PM
Stencil Art suggestions/help IrregularPulse General Chit Chat 4 09-02-2009 07:28 PM
I need to make this logo more versatile Soulive Label Display & Discussion 13 07-20-2008 10:20 PM
Make Your Own Brewery Logo Bottle Opener Key Chain Thwizzit Label Display & Discussion 12 05-21-2008 12:33 PM
New UPS logo. Sean General Chit Chat 11 10-27-2006 03:00 AM


Forum Jump