Love Temp Controller Series TS wiring diagram (2008+) - Page 6 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Love Temp Controller Series TS wiring diagram (2008+)

Reply
 
Thread Tools
Old 05-12-2009, 04:26 PM   #51
PtotheL
Recipes 
 
Dec 2008
Montreal, Quebec
Posts: 66

Great thread, this should be stickied.


I've got a question for all of you since I'm quite confused looking at the different Love Controllers models.

I am planning on building a kegerator with a built-in fan that will push the cold air through an isolated tube where my beer lines will run. The beer lines will come out on wall-mounted taps about 5 feet away in another room.

I'm wondering which Love Controller to buy so that the Fan circulating the air in the isolated pipe can start/stop independentely of the kegerator's compressor using the second temp probe.

ie:

Probe #1:
Location: Kegerator.
Relay #1 activates when temp on probe #1 is higher than 47*F, stops when temp is lower than 45*F

Probe #2:
Location: Inside the far end of the isolated tubes, where the shanks are.
Relay #2 activates when temp on probe #2 is higher than 52*F, stops when temps is lower than 47*F


I know I could simply buy two standalone single probe/single relay controllers, but they surely have a model that fit my needs, don't they ?

The TSS2 model seems like it could do the trick, but as the posted wiring diagram shows, it's more of a heater/cooler controller. I am worried than when one relay activates, the other will deactivate, which is not what I want.

Anybody out there can help me find the right one ?

Thanks.

 
Reply With Quote
Old 05-12-2009, 05:13 PM   #52
Boerderij_Kabouter
 
Boerderij_Kabouter's Avatar
Recipes 
 
Dec 2007
Oconomowoc, Wisconsin
Posts: 7,750
Liked 148 Times on 120 Posts


The TSS2-2100 will work for your application. You will wire two probes instead of one and program both relays to cooling.

 
Reply With Quote
Old 05-12-2009, 05:51 PM   #53
PtotheL
Recipes 
 
Dec 2008
Montreal, Quebec
Posts: 66

Quote:
Originally Posted by Boerderij_Kabouter View Post
The TSS2-2100 will work for your application. You will wire two probes instead of one and program both relays to cooling.
Thanks a lot. I'll order one soon!

 
Reply With Quote
Old 06-26-2009, 10:06 PM   #54
johnlvs2run
Recipes 
 
Aug 2008
western u.s.
Posts: 57
Liked 1 Times on 1 Posts


delete this

Reason: delete

 
Reply With Quote
Old 06-28-2009, 04:31 PM   #55
doggage
 
doggage's Avatar
Recipes 
 
Dec 2008
Fayetteville, Arkansas
Posts: 463
Liked 6 Times on 6 Posts


Been having a blast trying to get this controller wired to my chest freezer. HELP!!!


 
Reply With Quote
Old 06-29-2009, 02:57 PM   #56
Boerderij_Kabouter
 
Boerderij_Kabouter's Avatar
Recipes 
 
Dec 2007
Oconomowoc, Wisconsin
Posts: 7,750
Liked 148 Times on 120 Posts


No offense, but post #1 was the answer to your question....



If you do not know enough about electronics to follow the diagram, I REALLY recommend finding a friend to help you so you at least have two sets of eyes looking at things.

 
Reply With Quote
Old 07-06-2009, 05:16 PM   #57
johnlvs2run
Recipes 
 
Aug 2008
western u.s.
Posts: 57
Liked 1 Times on 1 Posts


Quote:
Originally Posted by doggage View Post
Been having a blast trying to get this controller wired to my chest freezer. HELP!!!

I don't know the answer, but this is a March, 2006, controller and is entirely different than the one in the msg #1 diagram.

P.S. I see you got it working. Great.

Quote:
Originally Posted by doggage View Post
This is how I got it finally working, with help from the Brew_Haus and SawDustGuy:

Temp probe: Blue on terminal 2; Brown on terminal 4.

Jumper: terminal 6 to 9.

Neutral (white): Spliced to pass through from wall outlet on to compressor with a wire also going to terminal 7.

Black (hot) wire coming from wall outlet going to terminal 6.

Black (hot) wire going to compressor from terminal 8.


 
Reply With Quote
Old 07-14-2009, 06:02 AM   #58
Rick500
 
Rick500's Avatar
Recipes 
 
Jun 2008
KY
Posts: 2,612
Liked 15 Times on 13 Posts


I have a TSX-10140, evidently the older, pre-2008 wiring (the unit has a 2007 date on it so I'm assuming).

Here is the unit's wiring diagram (terminal 3 is actually for a second probe but I left it off the drawing):



Here's how I plan to wire it (thanks to -TH- for posting the original diagram for a different model; I borrowed the drawing):


Look right?


 
Reply With Quote
Old 11-06-2009, 12:12 AM   #59
GamePreserve
Recipes 
 
Jul 2009
Philadelphia
Posts: 68
Liked 2 Times on 2 Posts


does it matter If Red goes to 1 or 2 for the Probe ? what effects will this have?

 
Reply With Quote
Old 11-18-2009, 03:50 AM   #60
Kelly.
Recipes 
 
Jun 2007
A Mile High - Colorado
Posts: 61

i was wondering if anyone could help me out with a wiring diagram for this love controller?


i cant seem to get it figured out
im using a 5cu holiday freezer if that matters.

i keep getting a EP2 error (defrosting probe error)
thanks in advance
__________________
Cloud 9 Brewing


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
do i have a pre 2008 love controller twst1up DIY Projects 0 08-30-2009 11:16 PM
Wiring 2008+ Love Controller churdbird Equipment/Sanitation 2 05-29-2009 02:58 PM
Need help wiring Love controller A4J Equipment/Sanitation 34 01-29-2009 01:49 AM
Love controller wiring question schind Equipment/Sanitation 6 10-27-2008 02:32 AM
Wiring my Love controller blizz81 Equipment/Sanitation 2 10-23-2008 04:44 AM


Forum Jump