Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegging and balanced system (or lack thereof)
Reply
 
Thread Tools
Old 11-07-2008, 09:50 PM   #1
TheH2
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Arlington, VA
Posts: 263
Liked 3 Times on 3 Posts
Likes Given: 1

Default Kegging and balanced system (or lack thereof)

So, Im new to kegging and will put two beers in keg this weekend, 2 taps one regulator. I plan on carbing both to different carb levels and serving both at the same, but lower pressure (whatever it takes to get a decent pour). So, currently I have an ESB and a Saison. I want less carbonation in the ESB. Will it work for me to carb them to different levels and then drop the pressure back and serve both at the same pressure (tap lines about 5 feet)? Or, since they will have different volumes of CO2, will they not pour at the same pressure?

In time I should probably get longer lines and a second regulator, but wanted to see if this would work for now.

Only downside so far I've seen from unbalanced line is that beer could eventually get flat and you waste more CO2 with unbalanced lines.


TheH2 is offline
 
Reply With Quote
Old 11-07-2008, 10:29 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,595
Liked 1231 Times on 810 Posts
Likes Given: 31

Default

Maintaining the two carb levels with one reg is going to be a major pain especially with juggling a lower pressure pour. Set the reg to the pressure that will get the ESB where you want it and let the Saison go along for the ride. After a week, you should have the ESB at the right level. Now disconnect that keg and crank the pressure for the Saison. After a week, it should be good. If you lower either pressure for pouring, you must give it a shot of the higher pressure to keep your carb level over time.


__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 11-07-2008, 11:03 PM   #3
lostforatime
Feedback Score: 0 reviews
 
lostforatime's Avatar
Recipes 
 
Join Date: Jul 2006
Location: Arizona
Posts: 135
Default

You can carb at two levels, the hard part is if you serve at 10 psi both the kegs will level out to be the same after awhile.
__________________
Adamson Brewing Company
85209
lostforatime is offline
 
Reply With Quote
Old 11-08-2008, 09:15 PM   #4
TheH2
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Arlington, VA
Posts: 263
Liked 3 Times on 3 Posts
Likes Given: 1

Default

Thanks. I'll carb the ESB, then get the Saison right and give the Saison a boost every so often. Sounds simple, sure it won't be that easy.

So, if I were to have balanced lines, I'd have to continue to serve approximately the same volume of C02 off of the same tap each time?
TheH2 is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Break proteins, or lack thereof. Schnitzengiggle All Grain & Partial Mash Brewing 8 09-11-2009 08:33 PM
Fermentation activity, or lack thereof?? tetrylone All Grain & Partial Mash Brewing 5 03-17-2009 05:24 PM
Trub (or lack thereof) illin8 Beginners Beer Brewing Forum 6 04-28-2008 03:25 PM
Carbonation Issues / Kegging / Balanced System malonja Bottling/Kegging 5 10-05-2006 10:22 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS