sanky tap ? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > sanky tap ?

Reply
 
Thread Tools
Old 11-07-2008, 02:06 AM   #1
Gumbys_Brew
Recipes 
 
Feb 2008
, South Carolina
Posts: 404
Liked 9 Times on 6 Posts



cananyone tell if this sanky tap is for american kegs or european kegs? i used it to tap a st. arnolds and it leaked everywhere trying to figure out if its the tap being the wrong type or if its faulty or if it was a faulty keg.




__________________
Future Brews- Bier Munchers Centennial Blonde
Primary- Bavarian Bock
Secondary- empty
Bottled- empty
Keg 1- Irish Blonde Ale
Keg 2-empty

 
Reply With Quote
Old 11-07-2008, 05:18 AM   #2
Gordie
Recipes 
 
Feb 2008
Healdsburg, CA
Posts: 380
Liked 29 Times on 9 Posts


That looks like a domestic tap. The euros would have the spear sticking out of the bottom even when the lever was up. Check out MicroMatic.com - Draft Keg Beer Equipment, Kegerator, Taps

 
Reply With Quote
Old 11-07-2008, 10:26 AM   #3
MoRoToRiUm
Recipes 
 
Jun 2008
Posts: 1,389
Liked 5 Times on 4 Posts


+1- Looks domestic to me.

Make sure lever is up, insert and turn clockwise to lock into keg. Insure lines are connected and tap is closed, pull handle outward, drop down and lock in down position to tap (handle snaps in), pull little relief valve to bleed excess PSI and set to serving PSI.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question for sanky tun users BrothersBrewing All Grain & Partial Mash Brewing 11 07-29-2009 04:14 PM


Forum Jump