Perlick faucet question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Perlick faucet question

Thread Tools
Old 11-01-2008, 02:21 AM   #1

I recently began kegging and for my first two kegs I was using picnic taps. I had my regulator set to 9# and everything was fine.

I just installed Perlick faucets and now my beer is pouring with way too much head; almost half the glass. Pressure is still set at 9#.

Any thoughts?

Reply With Quote
Old 11-01-2008, 02:27 AM   #2
popeiam's Avatar
Jan 2008
Whidbey Island WA.
Posts: 146

beer line from keg should be about ten feet long is what most will say. mine are five feet long

Reply With Quote
Old 11-01-2008, 12:28 PM   #3
Mustangj's Avatar
Oct 2006
Royal Oak, MI Michigan
Posts: 1,318
Liked 3 Times on 3 Posts

What temperature is the beer at?
"If my mother was tied up and held ransom, I might think about making a light beer."Greg Koch
Stone Brewing

Michigan Mashers

Reply With Quote
Old 11-02-2008, 04:54 PM   #4
foppa78's Avatar
Apr 2007
Kansas City
Posts: 313
Liked 2 Times on 2 Posts

You will need to balance your system. Do a quick search on balancing a draft system and you will find lots of useful info.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Perlick creamer faucet Conodor Bottling/Kegging 6 08-29-2009 07:41 PM
Perlick Faucet Problem? cpz28 Bottling/Kegging 2 08-23-2009 10:28 PM
Perlick Faucet thread question JMass Bottling/Kegging 1 06-30-2009 08:10 PM
Perlick Faucet Lock SchizoFilly Bottling/Kegging 0 05-03-2009 05:50 PM

Forum Jump