Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers and Stir Plates > My Stirplate... Cheap and Easy Build...
Reply
 
Thread Tools
Old 04-22-2009, 01:39 PM   #231
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 5,000
Liked 62 Times on 59 Posts
Likes Given: 51

Default

Quote:
Originally Posted by wwwdotcomdotnet View Post
also, how long before pitching do you guys turn off your stir plate? i am assuming the yeast needs to settle a bit before? could you throw the flask in the refrigerator to help separate the yeast?
As usual, it all depends. When you have the time, put the flask in the fridge and let it settle overnight. When you don't have the time, a few hours or even less will let much of the yeast settle.

Yes, cooling speeds up the the settling of the yeast, or at least it appears to do that. Lager yeast are a little different. They enjoy cooler temps and won't settle out as easily when the flask is cooled. I always allow enough time for a lager starter to finish out completely. I thien chill it for 24 hours before decanting and pitching.

You can leave a little wort in th flask after decanting and use the stir plate briefly to mix it up some prior to pitching.


Catt22 is offline
 
Reply With Quote
Old 04-22-2009, 02:26 PM   #232
springer
Feedback Score: 0 reviews
 
springer's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Wappingers falls NY
Posts: 4,993
Liked 22 Times on 20 Posts

Default

I got mine together last night and did a trial run. I don't know why but at times the stirbar seems to clatter but only on high. I used the K&J magnets that Anthony recommended I had to space about 3/8's of an inch apart on the washer . The power source is a 12v charger for one of those booster battery packs to jump start cars . Here is a video of it in action



__________________
'The taxpayer: That's someone who works for the federal government but doesn't have to take the civil service examination.'- Ronald Reagan
springer is offline
 
Reply With Quote
Old 04-22-2009, 02:39 PM   #233
tipicreeper
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Arizona
Posts: 192
Liked 2 Times on 1 Posts

Default

Looks really good!
Thanks for the video!
I believe the chattering you hear is the vortex reaching the stir bar and sucking air creating turbulence, very similar to pump cavitation.
Of course, you won’t be running the vortex that violently while making a starter. Just an inch or two from the surface, enough to keep the yeast in suspention. You may want to see if your power supply will allow the stir bar to turn slow enough for that.
Cheers,
-David
tipicreeper is offline
 
Reply With Quote
Old 04-22-2009, 02:49 PM   #234
springer
Feedback Score: 0 reviews
 
springer's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Wappingers falls NY
Posts: 4,993
Liked 22 Times on 20 Posts

Default

On slow it will only make the vortex about an inch. Its also spinning 2000ml of plain water I would think that wort with yeast would be a little more viscous
__________________
'The taxpayer: That's someone who works for the federal government but doesn't have to take the civil service examination.'- Ronald Reagan
springer is offline
 
Reply With Quote
Old 04-22-2009, 03:03 PM   #235
gingerdawg
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 404
Liked 39 Times on 30 Posts
Likes Given: 27

Default

Mine clatters a little when the flask isn't centered over the fan. I can often move the flask just a bit and it quiets down.
gingerdawg is offline
 
Reply With Quote
Old 04-22-2009, 10:07 PM   #236
joety
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
joety's Avatar
Recipes 
 
Join Date: Oct 2008
Location: Germantown Wisconsin
Posts: 1,449
Liked 17 Times on 15 Posts
Likes Given: 19

Default

Quote:
Originally Posted by springer View Post
On slow it will only make the vortex about an inch. Its also spinning 2000ml of plain water I would think that wort with yeast would be a little more viscous
I can always tell when the fermentation has taken off as my stir plate has a more difficult time maintaining a full vortex. Must be the viscosity issue you allude to.
__________________
Conical 1 - Just cleaned out.
Conical 2 - Empty
Carboys - None

Secondaries - None
Lagering in Kegs - Bavarian Dunkel

Kegged: Belgian Dirty Blonde Trappist Ale, Forbidden Fruit IPA, Double Chocolate Stout, Bourbon County Stout, BLC
Bottled: Oaked Bourbon Porter
Planned: Looking for ideas
joety is offline
 
Reply With Quote
Old 04-22-2009, 11:39 PM   #237
Anthony_Lopez
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Groton, MA
Posts: 1,693
Liked 22 Times on 8 Posts
Likes Given: 2

Default

The chattering is definitely either the bar not being centered in the flask or (most likely) the air being pulled into water/solution. U should be able to hear it in the original video I posted.
__________________
I'd rather have a bottle in front of me, than a frontal lobotomy.
--Tom Waits

You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
--Frank Zappa

My Cheap and Easy Stirplate
Anthony_Lopez is offline
 
Reply With Quote
Old 04-23-2009, 12:44 AM   #238
Schnitzengiggle
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: Tucson, AZ
Posts: 2,665
Liked 30 Times on 22 Posts
Likes Given: 16

Default

Quote:
I found that positioning the magnets while the stir bar is on top helped me find the magnetic center and the rotational center.
This is a magnet and the 1" stir bar configuration that works.

So that lead me to take a couple of smaller magnets and spread them out. Now the configuration looks like this for a 2" bar with a 2" magnet spread.
I ordered my magnets and stirbar today, going to Radioshack to pick up other components tonight. I bought from K&J magnetics, I got two 1/2" x 3/8" N42 discs that I am going to try and make work with the 2" stirbar I ordered.

If I remember correctly the distance between the magnets must be at least the length of the stirbar (like in the quote)?
__________________
follow me @ Broken Glass Brewery

Okham's Razor - simplest explanation is usually the correct one.

My DIY Kegerator - My DIY Fermentation Chamber - My DIY Portable Pump Box

Schnitzengiggle is offline
 
Reply With Quote
Old 04-23-2009, 04:39 PM   #239
wwwdotcomdotnet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Arlington, MA
Posts: 83
Liked 1 Times on 1 Posts

Default

Can anyone post a link to a 25 ohm potentiometer (linear) in a 16mm or 24mm case from Mouser or Digikey? I've ordered plenty of parts from both vendors in the past, but I'm having trouble finding anything less than 100 ohms.

I tried RS, but you know how that goes...
__________________
Primary: Pumpkin Pie Ale
Secondary: Imperial Mocha Stout
Conditioning:
Drinking: Hard Cider, The Hindenbrew Rye IPA, Belgian Witty Witbier
On Deck: More Cider, Smoked Porter
wwwdotcomdotnet is offline
 
Reply With Quote
Old 04-23-2009, 04:42 PM   #240
wwwdotcomdotnet
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Arlington, MA
Posts: 83
Liked 1 Times on 1 Posts

Default

I did find the part on the RS website, but I'd prefer to order from another place where I can get a bunch of other stuff for unrelated projects to justify the shipping.


__________________
Primary: Pumpkin Pie Ale
Secondary: Imperial Mocha Stout
Conditioning:
Drinking: Hard Cider, The Hindenbrew Rye IPA, Belgian Witty Witbier
On Deck: More Cider, Smoked Porter
wwwdotcomdotnet is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cheap and easy mashtun build Reddog68 Kettles, Mash Tuns, & Hot Liquor Tanks 17 01-29-2013 03:14 PM
Stirplate build......voltage question. tcMonk Chillers and Stir Plates 8 10-28-2009 06:46 PM
Cheap and Easy Wine digdan Wine Making Forum 13 06-24-2009 10:10 AM
My cheap & easy keg washer jpc Bottling/Kegging 6 04-06-2009 04:12 AM
Cheap, easy? Rob85 Beginners Beer Brewing Forum 7 11-16-2005 11:49 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS