is there any way to tell if something is Stainless Steel - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > is there any way to tell if something is Stainless Steel

Reply
 
Thread Tools
Old 10-28-2008, 01:48 AM   #1
Grinder12000
HBT_SUPPORTER.png
 
Grinder12000's Avatar
Recipes 
 
Jul 2008
Columbus WI
Posts: 2,995
Liked 41 Times on 34 Posts



is there any way to tell of something is Stainless Steel.

Reason I ask is I purchased what I THOUGHT was a set of aluminum pots at ShopKo for $25.

However - it did not have a 5g pot.

So I decided to upgrade and went to a 5 gallon Stainless Steel pot for $40.

However - I look at the pots and the stainless steel looks EXACTLY like the aluminum.

I have SINCE purchased a 4 gallon stainless steel pot which looks WAY more convincing as a Steel.

SO - anyway to tell???


__________________
Grinders Island Brewery - Pipeline

145 batches and counting

West Coast Blaster #4 almost go and on tap and a Dbl Chocolate Stout aging/carbing. Brewing East India Porter #4

 
Reply With Quote
Old 10-28-2008, 02:10 AM   #2
conpewter
HBT_SUPPORTER.png
 
conpewter's Avatar
Recipes 
 
Nov 2007
East Dundee, Illinois
Posts: 5,106
Liked 53 Times on 48 Posts


weight is a good indicator but not conclusive if you don't have all the exact dimensions of the pot. Aluminum will tarnish/oxidize and SS will not, so if you boil water in the pot for a long time and it is still shiny... it is SS, otherwise aluminum


__________________
"People should not be afraid of their governments. Governments should be afraid of their people." - V

Primary: Nothin
Secondary: Shady Lord RIS, Water to Barleywine, Pumpkin wine, burnt mead
Kegged: Crappy infected mild
Bottles: Apfelwein, 999 Barleywine, Oatmeal Stout, Robust Porter, Robust smoked porter, Simcoe Smash

 
Reply With Quote
Old 10-28-2008, 02:12 AM   #3
Jared311
Recipes 
 
Feb 2008
Columbia, MD
Posts: 500
Liked 1 Times on 1 Posts


You could always scratch the bottom side of both. Aluminum should be extremely easy to scratch while stainless steel will be a lot more difficult. Visually though, it sounds like you already know that its not stainless steel.
__________________
Sláinte,
Jared311

 
Reply With Quote
Old 10-28-2008, 02:35 AM   #4
cellardoor
Recipes 
 
Mar 2008
Brookfield IL
Posts: 381
Liked 4 Times on 4 Posts


It depends on the grade of stainless steel but some stainless steel is magnetic where aluminum is not. It could be a quick way to tell. If a magnet sticks its defiantly stainless steel, if it doesn't it's either aluminum or stainless steel.
__________________
Cellar Door Brewery

Primary: Smoked Porter
Secondary: Flanders Red 2010
Kegged: 10.10.10, Robust Porter, American IPA


"Without algae, there would be no life on earth, the seas would be sterile and the land would be uncolonized."
-Sir David Attenborough

 
Reply With Quote
Old 10-28-2008, 03:02 AM   #5
Grinder12000
HBT_SUPPORTER.png
 
Grinder12000's Avatar
Recipes 
 
Jul 2008
Columbus WI
Posts: 2,995
Liked 41 Times on 34 Posts


TY - magnet sticks on the pot in question - never thought of that!!
__________________
Grinders Island Brewery - Pipeline

145 batches and counting

West Coast Blaster #4 almost go and on tap and a Dbl Chocolate Stout aging/carbing. Brewing East India Porter #4

 
Reply With Quote
Old 10-28-2008, 02:02 PM   #6
TeleTwanger
Recipes 
 
Sep 2008
Posts: 693
Liked 6 Times on 6 Posts


yeah magnets will tell if a bridge plate is steel, though it could be plated too.
__________________
__________________________________________________
Primary: empty
Secondary: DogFish 60 Clone
Up next: The Bestist Bitter
Bottled: Blackout IPA


"Ooo Pretzels and Bier!"-Heidi Klum

 
Reply With Quote
Old 10-28-2008, 02:06 PM   #7
BigKahuna
Senior Member
HBT_LIFETIMESUPPORTER.png
 
BigKahuna's Avatar
Recipes 
 
Feb 2008
Eastern Colorado
Posts: 5,971
Liked 52 Times on 45 Posts


Quote:
Originally Posted by Grinder12000 View Post
TY - magnet sticks on the pot in question - never thought of that!!
Magnet will NOT stick to either stainless or Aluminum. NOT a good indicator. If a magnet sticks to it...you got super screwed!

If you have 2 pots, and you seriously can't tell them apart, you have got 2 pots made of the same metal.
__________________
Seriously. I'm here for BEER
It's Not The Size Of Your Rig That Counts....It's How Often You Use It.


 
Reply With Quote
Old 10-28-2008, 02:07 PM   #8
Boerderij_Kabouter
 
Boerderij_Kabouter's Avatar
Recipes 
 
Dec 2007
Oconomowoc, Wisconsin
Posts: 7,750
Liked 147 Times on 119 Posts


Scratch test is the easiest way. Take a butter knife and try to scratch both. The aluminum will scratch but SS won't.

 
Reply With Quote
Old 10-28-2008, 02:24 PM   #9
CarlLBC
 
CarlLBC's Avatar
Recipes 
 
Mar 2007
Lake Park(Valdosta), GA
Posts: 272
Liked 6 Times on 3 Posts


will a magnet stick to SS?

Stainless steels are a very broad group of metals. The name was adopted as a generic term for steel alloys with a minimum of 10.5% chromium. The chromium gives the steel its 'stainless' properties - essentially corrosion resistance. On the surface of the metal, a very thin chromium-rich oxide layer is formed which is inert - i.e. it prevents the steel from rusting. The advantage of stainless steels over plated steels is that, if scratched or damaged, the steel will 'self-repair' as a new oxide layer is formed. In plated steels, scratches in the plate will often lead to corrosion of the steel underneath.

In general, the higher the proportion of chromium, the stronger the corrosion resistance of the steel. In addition to chromium, other metals are added to give the steel particular properties such as strength and malleability. Specifically nickel is used to strengthen the oxide layer.

As for whether they are magnetic, the answer is that it depends. There are several families of stainless steels with different physical properties. A basic stainless steel has a 'ferritic' structure and is magnetic. These are formed from the addition of chromium and can be hardened through the addition of carbon (making them 'martensitic') and are often used in cutlery. However, the most common stainless steels are 'austenitic' - these have a higher chromium content and nickel is also added. It is the nickel which modifies the physical structure of the steel and makes it non-magnetic.

So the answer is yes, the magnetic properties of stainless steel are very dependent on the elements added into the alloy, and specifically the addition of nickel can change the structure from magnetic to non-magnetic.

This was found on www.physlink.com
__________________
That's what she said.

 
Reply With Quote
Old 10-28-2008, 03:14 PM   #10
Grinder12000
HBT_SUPPORTER.png
 
Grinder12000's Avatar
Recipes 
 
Jul 2008
Columbus WI
Posts: 2,995
Liked 41 Times on 34 Posts


Quote:
If you have 2 pots, and you seriously can't tell them apart, you have got 2 pots made of the same metal.
I had 4 pots that I BELIEVE were aluminum ($22 for four). and one 5g pot ($45) that if put with the other four is an exact match. However - magnets do not stick to the four but does to the 5g.

Now I have a 4g Stainless Steel pot that LOOKS way way more expensive where the magnet sticks.


__________________
Grinders Island Brewery - Pipeline

145 batches and counting

West Coast Blaster #4 almost go and on tap and a Dbl Chocolate Stout aging/carbing. Brewing East India Porter #4

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stainless Steel Braid? What Is It From? Eskimo Spy Equipment/Sanitation 24 05-16-2011 07:37 PM
Stainless Steel v. Aluminum DirtyJersey Beginners Beer Brewing Forum 18 03-23-2009 08:37 PM
Rusting Stainless Steel hayabusa Equipment/Sanitation 9 02-27-2009 10:02 PM
Fermenting in stainless steel? Reddy Winemaking Forum 11 10-06-2008 01:01 AM
Can Bleach be Used on Stainless Steel at all? RLinNH Equipment/Sanitation 7 09-01-2008 06:12 PM


Forum Jump