Best appliance paint? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Best appliance paint?

Reply
 
Thread Tools
Old 10-27-2008, 08:47 AM   #1
GNBrews
Recipes 
 
Mar 2007
Posts: 674
Liked 13 Times on 9 Posts



Obviously opinions are going to vary a bit on this, but what's the best appliance paint (preferably epoxy) to use on the inside of a converted chest freezer? The floor of mine has become scratched in a few places from Sankey kegs being shifted around, and those scratches are beginning to rust a bit...I'd like to nip the problem before it becomes a major issue.

Thanks guys.

 
Reply With Quote
Old 10-27-2008, 09:14 AM   #2
MoRoToRiUm
Recipes 
 
Jun 2008
Posts: 1,389
Liked 5 Times on 4 Posts


I used spray can stuff from lowes on the front of my oven- took it off and did it outside, because appliance paint is strong. It hasn't scratched or anything in over a year, so it seems pretty durable (and cheap!). Whatever you decide, ensure to remove all rust first and do it in a well ventilated area.

 
Reply With Quote
Old 10-27-2008, 01:51 PM   #3
juvinious
 
juvinious's Avatar
Recipes 
 
Jun 2008
Hollywood, FL
Posts: 391
Liked 15 Times on 4 Posts


Rustoleum is what I used on mine.
__________________
Primary: None
Conditioning: None
Kegged: Water
Bottled: Pyment | Strawberry Melomel

 
Reply With Quote
Old 10-27-2008, 03:33 PM   #4
EvilTOJ
 
EvilTOJ's Avatar
Recipes 
 
Dec 2005
Portland, OR, Oregon
Posts: 6,401
Liked 50 Times on 35 Posts


I've used the Rustoleum as well, with great results.
__________________
There is a very fine line between "hobby" and "mental illness."

 
Reply With Quote
Old 10-28-2008, 04:54 AM   #5
DiveBrew
Recipes 
 
Oct 2008
Posts: 15

Sherwin Williams Commercial/Industrial

Polane T Plus
Polane HS
Armorseal Epoxy
Armorseal Urethane

I have refinished a few machine tools using Polane and it's pretty tough. After only a 5 day cure one of my lathe's chip pans was full with aluminum and steel chips swathing in cutting oil and hydraulic fluid no problem. Or you can go to your local automotive paint supplier and get some epoxy primer along with a low level urethane (since your not painting a car with it) that way if you only need a small amount you can buy smaller quantity since Polane is sold by Sherwin Commercial by the gallon minimum.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer Diamond plating and Appliance paint: white to black WhiskeyScroggins Bottling/Kegging 7 10-24-2013 07:14 PM
8/4 SOOW appliance cord juvinious Brew Stands 2 04-07-2009 12:33 PM
Heatstick questions: Why appliance cord? Why 3+Gr wires? learningmore Equipment/Sanitation 20 08-18-2008 09:48 AM
Bottle Paint Metzger22 Bottling/Kegging 5 08-15-2008 01:38 PM
Appliance Paint ShortSnoutBrewing Kegerators & Keezers 1 10-31-2007 08:49 PM


Forum Jump