Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns, & Hot Liquor Tanks > Keggle Cutting...
Reply
 
Thread Tools
Old 10-24-2008, 01:53 PM   #1
Anthony_Lopez
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Groton, MA
Posts: 1,693
Liked 22 Times on 8 Posts
Likes Given: 2

Default Keggle Cutting...

As some know from my last thread, I made my keggle last night...

The holes are drilled and they came out perfect (finally)

I built essentially the same jig that BobbyM uses with a slight difference.

Instead of using two clamps, I used 3" U brackets to hold the grinder in place... It worked great...



I ended up putting a clamp on there just to have something to hold the cord away from the grinder...



The finished product...


__________________
I'd rather have a bottle in front of me, than a frontal lobotomy.
--Tom Waits

You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
--Frank Zappa

My Cheap and Easy Stirplate
Anthony_Lopez is offline
 
Reply With Quote
Old 10-24-2008, 02:09 PM   #2
BigKahuna
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
BigKahuna's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Eastern Colorado
Posts: 5,940
Liked 48 Times on 41 Posts
Likes Given: 6

Default

NICE!
I used a plazma cutter and I don't think mine looks that nice!


__________________
Seriously. I'm here for BEER
It's Not The Size Of Your Rig That Counts....It's How Often You Use It.
BigKahuna is offline
 
Reply With Quote
Old 10-24-2008, 02:11 PM   #3
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,697
Liked 1263 Times on 833 Posts
Likes Given: 34

Default

I wonder when you'll get a reply talking about how dangerous this is. Don't listen, they're just jealous.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
July 4th Sale, $20 off plate chillers through July 4th.
Bobby_M is offline
 
Reply With Quote
Old 10-24-2008, 02:20 PM   #4
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
the_bird's Avatar
Recipes 
 
Join Date: May 2006
Location: Adams, MA
Posts: 20,788
Liked 451 Times on 367 Posts
Likes Given: 109

Default

Quote:
Originally Posted by Bobby_M View Post
I wonder when you'll get a reply talking about how dangerous this is. Don't listen, they're just jealous.



What would be dangerous about this? I freehanded my keggle, came out fine, but using a jig like this would have been cleaner.

Maybe I'm just out of the loop... has there been some keggle-building controversy I've missed out on?
__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

Jazz hands!
the_bird is offline
 
Reply With Quote
Old 10-24-2008, 02:36 PM   #5
Anthony_Lopez
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Groton, MA
Posts: 1,693
Liked 22 Times on 8 Posts
Likes Given: 2

Default

not that I know of... some people are just scared of power tools... i think thats the reality of any "debate" So far, it has cost me 60 dollars for the keg, the cutting disks, and the fittings (all stainless) I'm looking at another 20 bucks for the welding...
__________________
I'd rather have a bottle in front of me, than a frontal lobotomy.
--Tom Waits

You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
--Frank Zappa

My Cheap and Easy Stirplate
Anthony_Lopez is offline
 
Reply With Quote
Old 10-24-2008, 03:24 PM   #6
flack
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Las Vegas, NV
Posts: 100
Liked 4 Times on 1 Posts

Default

I've been meaning to ask for awile now, and this thread (sorry if i'm hijacking) is a good place to ask.

Doesn't the inner lip of a cut keggle make it a beiotch to clean out grains etc? is there a benefit to keeping the top lip that i'm missing or is it just the easier way to keep the handles?
flack is offline
 
Reply With Quote
Old 10-24-2008, 03:32 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,697
Liked 1263 Times on 833 Posts
Likes Given: 34

Default

That top rolled edge is what keeps the keg round believe it or not. When I slotted mine in two spots to slide a full false bottom in, the top of the keg became oval. I've been scooping most of the spent grains out with a chinese soup container and then throwing it out on the lawn to hose out. I keep meaning to cut half the top skirt off so I can tippy dump it but I'm spread too thin to work on my rig.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
July 4th Sale, $20 off plate chillers through July 4th.
Bobby_M is offline
 
Reply With Quote
Old 10-24-2008, 03:52 PM   #8
culaslucas
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Boulder, CO
Posts: 411
Liked 5 Times on 5 Posts
Likes Given: 9

Default

alternatively couldn't you weld on a ring from the top rolled edge down to the cut hole so there was a nice sloped surface from the rolled edge down to the opening? Man that'd be nice!
__________________
Quote:
Originally Posted by chefmike
FEAR THE APFEL FOAM!!!!!!
culaslucas is offline
 
Reply With Quote
Old 10-24-2008, 04:30 PM   #9
sigmund
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2008
Posts: 417
Liked 4 Times on 4 Posts

Default

Quote:
Originally Posted by NoClueBrewMaster View Post
As some know from my last thread, I made my keggle last night...

The holes are drilled and they came out perfect (finally)

I built essentially the same jig that BobbyM uses with a slight difference.

Ain't it great?? I used the same method with the same results and it's pretty much no hassle. I spent more time taking off the sharp edges than cutting the keg.
__________________
Quote:
BTW, those can not be drunk in multiple count if the day’s plan includes finish carpentry work or power tools.
- Schoonie

Burkey Street Brewery
sigmund is offline
 
Reply With Quote
Old 10-24-2008, 04:56 PM   #10
Anthony_Lopez
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Groton, MA
Posts: 1,693
Liked 22 Times on 8 Posts
Likes Given: 2

Default

Agreed... I spent some time with a few different air tool bits cleaning it up... The cut itself took me about 3 minutes max... The longest part of the process was getting my jig built...


__________________
I'd rather have a bottle in front of me, than a frontal lobotomy.
--Tom Waits

You can't be a real country unless you have a beer and an airline - it helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
--Frank Zappa

My Cheap and Easy Stirplate
Anthony_Lopez is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simplest (?) Keggle Cutting Jig passedpawn Kettles, Mash Tuns, & Hot Liquor Tanks 228 04-11-2015 12:40 AM
cutting top for keggle, $#?&*@@!!!! Ol' Grog Equipment/Sanitation 43 08-05-2010 11:54 AM
Keggle Cutting MagicTrix Equipment/Sanitation 7 03-27-2008 01:52 PM
Cutting a Keggle jcb317 Equipment/Sanitation 20 12-17-2007 06:28 PM
Keggle Cutting The Pol Kettles, Mash Tuns, & Hot Liquor Tanks 42 06-08-2007 02:24 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS