Brew in a Bag: 73% Efficiency - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Brew in a Bag: 73% Efficiency

Thread Tools
Old 10-19-2008, 01:48 AM   #1
Oct 2008
Dallas, Texas
Posts: 45
Liked 1 Times on 1 Posts

I did my first "brew in a bag" today. My wife sewed a bag for me from a material similar to voile: 28 inches by 30 inches. It fit nicely in my keggle.

I brewed a Guinness Draught clone, all grain. Total grain bill came to just over 8lbs.

I mashed in the keggle, in the grain sack. Doughed in at 120 and brought it slowly up to 151. I mashed at 151 (within a few degrees or so, up and down) for 90 minutes and stirred almost every ten minutes using my burner to regulate a steady temp.

No sparging. I just let the bag drip dry for 10-15 minutes while I raised the keggle to a boil. I gave the bag a couple of gentle squeezes and that's it.

I boiled for little over an hour. Perle hops for 60 minutes.

Five gallons with a 73% efficiency (my OG was 1044). Not bad and not much clean up.

The grain bag stitching ripped slightly when I pulled it out of the keggle. A bit of grain got into the wort. I got it out with a hand strainer. Also, the weave of the fabric wasn't as tight as it should be and some smaller pieces of husk did make it through the bag. I got most of this with a hand strainer.

I'm definitely going to "Brew in a Bag" next time - but work on perfecting the large bag.

Does anyone else have advice on the BiaB method?

Reply With Quote
Old 10-19-2008, 01:41 PM   #2
david_42's Avatar
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,595
Liked 153 Times on 144 Posts

The biggest problem with the method: fine mesh isn't strong enough, strong mesh isn't fine enough. Look around for a heavy mesh shopping bag. Put your brewing bag inside it.
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

Reply With Quote
Old 10-19-2008, 02:03 PM   #3
MikeRLynch's Avatar
Nov 2006
Posts: 888
Liked 11 Times on 10 Posts

Did you rig something to lift the bag out? Even only 8lbs of soaking wet grain would be a little heavy for me to hang over the kettle with only my arms. Also, was your bag touching the bottom of the kettle when you brought it up to temp? I did this once for a small batch on my stove, and I guess the temp got out of hand and I melted the bag to the bottom of the kettle. Lost a batch and a pot! I don't know if I'll go from the cooler mash tun I have now, but for future small batch stove top brews, this might be interesting.
Lost Elm Brewing Co.
Stafford Springs, CT

Follow us on Twitter
Like us on Facebook

Reply With Quote
Old 10-19-2008, 02:38 PM   #4
Apr 2008
Berkley, MI
Posts: 491
Liked 4 Times on 3 Posts

I put a veggie strainer on the bottom of my pot when I did BIAB to prevent a melted bag. Also maybe double bag your bag for increased screening potential of grain.

Reply With Quote
Old 10-19-2008, 06:04 PM   #5
Oct 2008
Dallas, Texas
Posts: 45
Liked 1 Times on 1 Posts

I have a false bottom so that kept the bag from touching the bottom while I heated the keggle.

I too used a veggie strainer to rest the bag over the keggle so that it could drain. Hardly any effort.

Good idea on the double-bag suggestion.

Has anyone every created a giant metal basket? A stainless steel "french fry basket" (if it were round) would be ideal.

Reply With Quote
Old 10-19-2008, 07:45 PM   #6
WBC's Avatar
Jun 2007
La Puente, CA, California
Posts: 2,164
Liked 8 Times on 8 Posts

I do not see any reason to brew in a bag if you have a cooler with a false bottom. If you vorlauf enough you should get very clear wort and cleanup is easy enough too. I always make 10 to 12 gallons in a Rubbermaid round cooler with a false bottom which seems very easy to me. I don't have to heat anything up as it holds temperature great. I can do a decoction mash too. Watch the video on decoction in the "All Grain" forum.

Fermentor 1: Bill's House Ale II, Fermentor 2: German Helles, Fermentor 3: Bill's Schworzbier (Black Bier)
Tap 1: Bill's House Ale II, Tap 2: German Hefewizen, Tap 3: Nut Brown Ale
Future Brews: Stone IPA Clone, Blonde Ale, Budvar Clone, Newcastle Clone
New toy: Blichmann 27 gallon fermentor

“If you find yourself in a hole, the first thing to do is stop digging”

“Good judgment comes from experience, and a lotta that comes from bad judgment”

Reply With Quote
Old 09-20-2010, 06:33 PM   #7
Sep 2010
Long Island
Posts: 4

I went down to Home Depot and got a five gallon paint strainer for a buck and a half. Works great, but I do small batches for MrBeer fermenter. Efficiency hasn't been so great, but I'm going work on that.

Reply With Quote
Old 09-20-2010, 06:49 PM   #8
Nov 2008
south of Eugene, OR
Posts: 360
Liked 5 Times on 5 Posts

My large cooking pot has a metal strainer attachement that is about the size of the pot. We use it to steam veggies. If I were going to try this, I would probably use that.

Reply With Quote
Old 09-21-2010, 12:59 AM   #9
Apendecto's Avatar
Jul 2009
Rockwood, MI
Posts: 457
Liked 9 Times on 6 Posts

The last few batches have been BIAB. My last batch had about 14 lbs of grain and didn't leak a bit. When I put my bag together, I made sure...

1. The "grain" of the bag was inline with how it would be used. If I pulled on the material in one direction, I could separate the fibers. If I pulled the other way, I wouldn't. I figured this would be stronger.

2. I stitched up anything that needed to be attached, like 3 times (look at a pair of jeans for example) and for my keggle bag I rolled the bottom over and stitched it 5 times. I figured this would be stronger, too.

3. I used nylon upholstery thread. The staff at the material store said this would be the strongest thread.

Good luck. BIAB is great!

Reply With Quote
Old 01-18-2011, 01:11 AM   #10
Jan 2011
Pittsburgh, PA
Posts: 1,538
Liked 170 Times on 81 Posts

Can something like this be used for BIAB? Maybe "brew in a basket" ???

It would probably still need to be lined with something to keep the grains from leaking out... but it would be a lot stronger than a stitched fabric or mesh bag.

Fry basket

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tried Brew-In-A-Bag tonight, got bad efficiency: 1.034 instead of 1.054 Picobrew All Grain & Partial Mash Brewing 36 09-21-2010 10:57 AM
First AG brew - 84.5% efficiency ThreeTaps General Beer Discussion 5 10-11-2009 03:00 PM
How is 70% efficiency for my 3rd AG brew? alpo All Grain & Partial Mash Brewing 5 03-03-2009 08:23 AM
Brew Efficiency Question Gwinny All Grain & Partial Mash Brewing 6 11-11-2007 06:30 PM

Forum Jump