Aging beer: Facts, myths, and discussion - Page 25 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > General Techniques > Aging beer: Facts, myths, and discussion

Reply
 
Thread Tools
Old 01-25-2012, 06:13 PM   #241
Curtis2010
HBT_SUPPORTER.png
 
Curtis2010's Avatar
Recipes 
 
Dec 2011
, Guatemala
Posts: 1,826
Liked 299 Times on 204 Posts


Quote:
Originally Posted by Seven View Post
Go ahead and age your IPAs if that's what gives you the best results. My personal experience has been in line with what others have said about the hop character diminishing over time.
Thanks for the replies. Based upon those and reading a bit more on the subject, what I think I may try is a compromise: brew a batch and enjoy some of it after a more typical conditioning time, but also set some aside to condition longer. This should work well in my case because my girlfriend really likes hop amora and flavor, but not extreme hop bitterness (we've consumed many batches of Saaz hopped Pilsners this season).

The original IPA's spent months in transit so the end result should resemble something historically accurate.

Mabye next season I'll try a really big Barley Wine....



 
Reply With Quote
Old 01-25-2012, 06:41 PM   #242
geezerpk
Recipes 
 
Oct 2010
upstate SC
Posts: 105
Liked 2 Times on 2 Posts


"but the hops actually mellowed out nicely after 1.5 years."
Well, as you might deduct from my screen name, I'm not really into 1.5 year aging techniques. Green bananas are just marginally on my radar. :-D



 
Reply With Quote
Old 01-25-2012, 06:54 PM   #243
midfielder5
Recipes 
 
Jan 2009
San Francisco, CA
Posts: 1,450
Liked 72 Times on 64 Posts


Quote:
Originally Posted by Curtis2010 View Post
I am planning brew up an IPA and leave it to condition/age while we are gone (about 6 months). My current version of the recipe (using BrewSmith), has an OG of 1.068, IBU of 55.8, and estimated ABV of 7.0%
If it were me, I would just plan on dry hopping a ton for 7-10 days after I got back (or if you keg, keg hop it). The bitterness will likely still be present, but little aroma/flavor.

Reason: clarity

 
Reply With Quote
Old 03-15-2012, 04:51 AM   #244
MMachi
Recipes 
 
Sep 2011
Pleasanton, CA
Posts: 43
Liked 1 Times on 1 Posts


Resurrecting a long living thread as I haven't been able to find my answer searching. My question is for anyone with knowledge or opinion on the best conditions to bottle age beer. Is there any data on the value of bottle aging at 68F vs refrigeration temps? I have been brewing since October 2011 and have successfully retained 3 bottles of every batch for future tasting and wanted to make sure I am storing them under ideal temps. So far they have been at 68F or so in the same spot I carb full batches.

Anyone have experience with the ideal bottle aging temps?

Thanks!

 
Reply With Quote
Old 03-15-2012, 03:56 PM   #245
Jboggeye
Recipes 
 
Apr 2010
NYC
Posts: 203
Liked 1 Times on 1 Posts


68 is not "ideal" I think the rule of thumb is that for every 10 degrees, the speed at which aging happens doubles. (so 68 means that your beer with age twice as fast as a beer kept a 58)
That being said, the entire subject is quite complicated.
You have hop bittering and aroma that will disappear faster, oxidation will happen faster, and any infection will be more noticeable with more time at higher temps. With good sanitation and higher ABV beers, room temp has worked well enough for me. it just means that my beers mature much quicker.
To add to the complexity of the issue, I always LOVE my beers 3 weeks to 5 weeks in the bottle, then they aren't as good until 2 months later. (omit hoppy beers from this, fresh is best)
Someone once mentioned bottle shock for wine, and I would love to learn more on that subject, and see if it applies to beer. There isn't very much literature on storing beer at room temp though.

To answer your question:
I don't have the ability to store beer below 68, so I would say drink IPAs within 2 months, and make a lot of bottle conditioned Belgian Beers, they seem to do best at room temp.

Best temp: low 50s for ales, lower for Lagers.
Too cold or too long drops alot of flavor out of ales for me. I like more character in porters and darker belgian beers, and I find that if I leave them in the fridge, some complexity gets lost. There are tannins that I don't want to drop out too quick. I like to let lighter beers (lagers, Belgain Pale Ales, APA/IPA...) sit cold in the fridge, as I want the malt to be clean.

In the end, If I could get a cellar for my beers, at 50 degrees, i would be a happy camper, and so would my beers. they would have a good condition to mature, but at a much slower rate than room temp- which is the best of both worlds.

 
Reply With Quote
Old 03-16-2012, 03:30 AM   #246
MMachi
Recipes 
 
Sep 2011
Pleasanton, CA
Posts: 43
Liked 1 Times on 1 Posts


Thanks for the detailed answer. In searching a bit more today I found a BrewStrong episode from last August that cleary made the statement in that lower temps are better and that every 10 degrees compounds the timing. I think I have room in my tiny wine fridge to store these "aging beers" for a while around 50F, but if I run out of space I guess I'll just have to drink them to make room!

Thanks for the feedback!

 
Reply With Quote
Old 04-25-2012, 04:14 AM   #247
skullface1818
Recipes 
 
Jan 2012
tallahssee, fl
Posts: 157
Liked 5 Times on 5 Posts


To comment on this one (because I am new) I have to say
28 days IS my typical grain to bottle time. 2 weeks to ferment, and 2 weeks to age.

sometimes I cant wait that long and have to refrigerate my beers so they don't foam-explode when I open them, but yea, that is pretty much the time tables I use for my beer.

If I juice my beer with sugar to bring its alcohol levels up, yes, ageing a extra week or two is a good idea, but on most grain bills 28 days is the time I should wait till drinking time.

 
Reply With Quote
Old 08-13-2012, 07:46 PM   #248
flanneltrees804
Recipes 
 
Jan 2012
Chicago, IL
Posts: 118
Liked 1 Times on 1 Posts


I am really looking to ramp up my brewing in the near future and I was thinking that a reasonable turnover time for mild brews (1.035-1.060) would be 21 days. This would give me 7 days in primary, 2 day diacetyl rest, 3 day cold condition and 9 days to carb in a keg. The carbing is what I'm hesitant on but I feel like if I get my process down then all should go well. Something like 30 psi, shake for 2 minutes, leave overnight at 30 then turn down to serving pressure for the remaining 8 days. What do you all think?

 
Reply With Quote
Old 08-13-2012, 10:49 PM   #249
gcdowd
Recipes 
 
Jun 2011
Baldwinsville, NY
Posts: 1,878
Liked 201 Times on 151 Posts


Quote:
Originally Posted by flanneltrees804
I am really looking to ramp up my brewing in the near future and I was thinking that a reasonable turnover time for mild brews (1.035-1.060) would be 21 days. This would give me 7 days in primary, 2 day diacetyl rest, 3 day cold condition and 9 days to carb in a keg. The carbing is what I'm hesitant on but I feel like if I get my process down then all should go well. Something like 30 psi, shake for 2 minutes, leave overnight at 30 then turn down to serving pressure for the remaining 8 days. What do you all think?
I do the set and forget method at 12 psi and it's ready in 9 days. It won't hurt to force carb it for a bit but I've found that it's pretty much carbed up in a week with just setting it to serving pressure.
__________________
God invented whiskey to keep the Irish from ruling the world.

Pappers_ Likes This 
Reply With Quote
Old 09-29-2012, 04:34 AM   #250
hennesse
Recipes 
 
Feb 2011
Broad Run, Virginia
Posts: 42
Liked 1 Times on 1 Posts


Quote:
Originally Posted by flanneltrees804 View Post
I am really looking to ramp up my brewing in the near future and I was thinking that a reasonable turnover time for mild brews (1.035-1.060) would be 21 days. This would give me 7 days in primary, 2 day diacetyl rest, 3 day cold condition and 9 days to carb in a keg. The carbing is what I'm hesitant on but I feel like if I get my process down then all should go well. Something like 30 psi, shake for 2 minutes, leave overnight at 30 then turn down to serving pressure for the remaining 8 days. What do you all think?
I do the set and forget method for everything.
Primary: 10 days
Secondary: 14 days
Keg: 5 days

Ten days in the primary is (almost) always enough for the beers I normally brew. I do check the airlock activity every couple days just to make sure everything's going normally.

I use a secondary for two reasons: I dry-hop some of my beers; and because of my limited equipment - two 6.5 gal and two 5 gal carboys. I need to free up the 6.5's for the next 10 gallon batch.

Fourteen days in the secondary is about right for dry-hopping. To keep things simple, I stick with fourteen days whether dry-hopping or not.

When I keg, I pump it up to 30 psig to seal the lid, shake for a minute or two, burp it, then turn down to serving pressure (10-12 psig). It's usually ready to drink in 5 days.

I'm lazy and forgetful!

Taking daily gravity readings is for the birds. I forget to count the airlock bubbles every day. I forget when I brewed or transferred or kegged it.

So I use blue painter's tape (almost always on sale at HomeCheapo or Lowes) and a Sharpie to make two date schedules - one goes on the carboy. I cover the carboy with a green trashbag since my wife forgets to turn off the light in the pantry. So the second schedule gets stuck on top of the airlock, since I'd be too lazy to lift the bag to see the first one. After kegging, the airlock schedule gets stuck on the refrigerator door. So the "schedule" is always right there in front of me.

Now if only I could remember what day today is!

I tried the overnight 30 psig once, but I forgot about it the next day, and ended up with a fizzy mess. Never did that again.

This "schedule" method works well for someone of my limited braincells. Another benefit is that doing it the same way each time eliminates some of the variables - so I can concentrate on improving other parts of my brewing process.

Dave



geezerpk Likes This 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
CommerICal beer discussion? Ketchepillar Commercial Brew Discussion 0 06-01-2009 10:54 PM
Interesting beer facts... par383 General Beer Discussion 2 10-11-2008 03:07 AM


Forum Jump