First batch racked to secondary...weak flavor? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > First batch racked to secondary...weak flavor?

Reply
 
Thread Tools
Old 10-08-2008, 04:50 AM   #1
rowespencer
Recipes 
 
Jul 2008
SE Michigan
Posts: 27


I just transferred my first batch (Breakfast Stout) to the secondary. It was in primary about 10 days. It smelled nice and fermenty, color was good and no wierd floaties. Gravity read about 1030...honestly, I probably don't care as much about gravity as I should...but I don't. Anyway...

Of course, I had to take a taste. It wasn't horrible. I mean, yeah it's really green, but it wasn't bad. I couldn't spot anything that seemed blatantly "off". My main observation was this: It didn't have that nice roasted grain flavor that one should get from a stout. Is this something that comes with the aging process or will I just end up with a very thin stout?

 
Reply With Quote
Old 10-08-2008, 05:36 AM   #2
scinerd3000
 
scinerd3000's Avatar
Recipes 
 
Mar 2008
Milton, De
Posts: 2,127
Liked 11 Times on 11 Posts


thats pretty high for racking to secondary. What was your starting gravity? Im sure its weak because odds are very very good its not done fermenting
__________________
On Hiatus: Brewing at work....

 
Reply With Quote
Old 10-08-2008, 05:37 AM   #3
Warped04
I am Wally
HBT_LIFETIMESUPPORTER.png
 
Warped04's Avatar
Recipes 
 
Jul 2007
San Diego, CA
Posts: 1,454
Liked 4 Times on 4 Posts


At 1.030 that puppy probably wasn't done fermenting! I would have left it until you were closer to your FG. You really run the risk of it not finishing out.

On to your question. When you are tasting a warm flat beer out of the fermentor, it's a warm flat beer. The taste will change once you get it into bottles, cold and carbed. It just depends on your recipe on how it will finish out.

 
Reply With Quote
Old 10-08-2008, 05:53 AM   #4
scinerd3000
 
scinerd3000's Avatar
Recipes 
 
Mar 2008
Milton, De
Posts: 2,127
Liked 11 Times on 11 Posts


Warped's right-if it doesnt drop anymore i would repitch some dry yeast into your carboy....it needs to be lower. Whats ur recipe?
__________________
On Hiatus: Brewing at work....

 
Reply With Quote
Old 10-08-2008, 01:42 PM   #5
rowespencer
Recipes 
 
Jul 2008
SE Michigan
Posts: 27

Quote:
Originally Posted by scinerd3000 View Post
Warped's right-if it doesnt drop anymore i would repitch some dry yeast into your carboy....it needs to be lower. Whats ur recipe?
It was a kit. Once I got it into secondary, the airlock started bubbling again, so it clearly wasn't done working. Ingredients are as follows:

1.5 lbs. Flaked Oats
0.5 lbs. Simpson's Roasted Barley

3.15 lbs. Dark Malt Syrup
1 lbs. Lactose

1 oz. Willamette (60 min)

Danstar Windsor Ale Yeast

 
Reply With Quote
Old 10-08-2008, 03:23 PM   #6
Warped04
I am Wally
HBT_LIFETIMESUPPORTER.png
 
Warped04's Avatar
Recipes 
 
Jul 2007
San Diego, CA
Posts: 1,454
Liked 4 Times on 4 Posts


Quote:
Originally Posted by rowespencer View Post
It was a kit. Once I got it into secondary, the airlock started bubbling again, so it clearly wasn't done working. Ingredients are as follows:
It may ferment more slowly now, so be patient. Take a gravity reading every now and then to make sure you get the gravity down near your FG (should have been supplied with the kit). You don't want bottle bombs.

I'm going to make the assumption that you steeped the roasted barley? I think once it finishes fermenting, you are going to see the flavor that you are expecting.

 
Reply With Quote
Old 10-08-2008, 03:29 PM   #7
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,922
Liked 3198 Times on 1886 Posts


Don't be so much in a hurry to rack or do anything....Many of us leave our beers in primary for 3-4 weeks then bottle...that way it let's them finish out and the yeasts then can clean up their waste byproducts.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 10-08-2008, 04:51 PM   #8
rowespencer
Recipes 
 
Jul 2008
SE Michigan
Posts: 27

Quote:
Originally Posted by Revvy View Post
Don't be so much in a hurry to rack or do anything....Many of us leave our beers in primary for 3-4 weeks then bottle...that way it let's them finish out and the yeasts then can clean up their waste byproducts.
I figured with only about 3lbs of LME, 10 days would have been plenty of time....guess I need to rely more on the almighty hydrometer

 
Reply With Quote
Old 10-08-2008, 05:01 PM   #9
scinerd3000
 
scinerd3000's Avatar
Recipes 
 
Mar 2008
Milton, De
Posts: 2,127
Liked 11 Times on 11 Posts


the hydrometer is most definitely your lifeline....use it like the force.
__________________
On Hiatus: Brewing at work....

 
Reply With Quote
Old 10-08-2008, 06:04 PM   #10
rowespencer
Recipes 
 
Jul 2008
SE Michigan
Posts: 27

Quote:
Originally Posted by scinerd3000 View Post
the hydrometer is most definitely your lifeline....use it like the force.
"Brew or brew not....there is no try." - Yoda on homebrewing

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
1st Batch: Racked to Secondary Successfully jheist Beginners Beer Brewing Forum 1 03-31-2009 01:34 PM
Racked my first batch to secondary! bsay Beginners Beer Brewing Forum 4 08-22-2008 02:25 AM
racked to secondary too soon? Long Live Liver Beginners Beer Brewing Forum 8 04-07-2006 10:49 PM
Just racked my 1st batch to secondary! MrSaLTy Beginners Beer Brewing Forum 3 02-25-2006 03:29 PM


Forum Jump