Any way to tighten a Perlick faucet? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Any way to tighten a Perlick faucet?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Thread Tools
Old 10-05-2008, 05:48 PM   #1
Jonnio's Avatar
Dec 2007
Posts: 1,475
Liked 7 Times on 7 Posts

I have Perlicks on both of my taps and they are VERY easy to pull forward for drawing a beer. So much so that some of my heavy tap handles can't even be used because the faucet can't hold them.

Is there any way to tighten this up so that you have to pull harder on the handle in order to get the beer flowing?

Official member of HBAMAP (Home Brewers Against Murder and Pedophilia)
Originally Posted by Revvy View Post
Then that means dumping your beer because you think it's bad is tantamount to abortion! And as Big Kahuna says, drinking a beer too soon is tatamount to beer pedophilia...

Reply With Quote
Old 10-05-2008, 05:55 PM   #2
Vendor and Brewer
Bobby_M's Avatar
Aug 2006
Whitehouse Station, NJ
Posts: 22,974
Liked 1584 Times on 1021 Posts

Yeah, tighten the ring that the handle stud sticks through. It compresses onto the ball harder. You can make it so tight that you can barely open it.
Welcome to I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wobbly Perlick Faucet NoVa Bottling/Kegging 10 10-24-2009 09:54 PM
Perlick Faucet Lock SchizoFilly Bottling/Kegging 0 05-03-2009 05:50 PM
Perlick faucet question [email protected] Bottling/Kegging 3 11-02-2008 04:54 PM
Old Perlick Faucet Cleaning abraxas Equipment/Sanitation 3 12-19-2007 05:14 PM

Forum Jump