Trouble assembling faucet/shank - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Trouble assembling faucet/shank

Reply
 
Thread Tools
Old 10-02-2008, 10:21 PM   #1
Baja_Brewer
Recipes 
 
Jun 2008
Rhode Island
Posts: 2,758
Liked 133 Times on 103 Posts



Hi all, ive been fighting with this for about an hour, so i decided to ask for some input. The shank is through the door and everything is tightened down as much as possible, but when I hook up the line to my corny liquid starts dripping out one of the collar tightening holes (the bottom one) Im thinking it might be a problem with them matching up or something, but ive taken it apart and put it back together about 3 times.

Any input?



 
Reply With Quote
Old 10-02-2008, 10:23 PM   #2
Baja_Brewer
Recipes 
 
Jun 2008
Rhode Island
Posts: 2,758
Liked 133 Times on 103 Posts


oh, and im using the midwest refrigerator conversion kit if it matters

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Single tower, elbow shank, faucet and long shank for sale tmoney1224 For Sale 2 07-09-2009 11:50 PM
Re-assembling stout faucet Baja_Brewer Equipment/Sanitation 5 07-02-2009 01:23 PM
Beer faucet and shank help nyer Bottling/Kegging 2 08-04-2008 10:05 PM
Grommet for faucet shank howlinowl Bottling/Kegging 4 06-30-2007 07:23 PM
Help with a measurement for a faucet shank Dude Equipment/Sanitation 7 01-14-2007 12:36 AM


Forum Jump