Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Need some help drilling my Danby DAR446BSL Co2 line
Reply
 
Thread Tools
Old 09-13-2008, 09:26 PM   #1
green1181
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Geraldton, Western Australia
Posts: 16
Likes Given: 1

Default Need some help drilling my Danby DAR446BSL Co2 line

I got a danby DAR446BSL, have the tower all mounted, but my 20# tank will not fit into the fridge so I want to keep it behind the fridge. Is there any place on the back where I can drill it withouth hitting a line?


green1181 is offline
 
Reply With Quote
Old 09-20-2008, 08:52 AM   #2
EvilTOJ
Feedback Score: 0 reviews
 
EvilTOJ's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Portland, OR, Oregon
Posts: 6,464
Liked 40 Times on 31 Posts
Likes Given: 3

Default

I'm not sure if there's a good place to drill or not. Is there a drainplug in the bottom of the fridge? Sometimes people run lines through it on those smaller fridges.


__________________
There is a very fine line between "hobby" and "mental illness."
EvilTOJ is offline
 
Reply With Quote
Old 12-04-2008, 02:21 AM   #3
jsteurer
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2006
Location: louisville, KY
Posts: 7
Default

I was wondering the same thing I just purchased the Danby. I saw the danby kegerator in the store and the top left in the back was drilled for the CO2 line.

green1181...Did you have any luck?
jsteurer is offline
 
Reply With Quote
Old 12-04-2008, 02:31 AM   #4
green1181
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Geraldton, Western Australia
Posts: 16
Likes Given: 1

Default

Yep, there was a perfect size hole with a grommet for a drain hose
green1181 is offline
 
Reply With Quote
Old 12-04-2008, 09:55 AM   #5
MoRoToRiUm
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Posts: 1,413
Liked 4 Times on 4 Posts

Default

You still want to make sure that it can drain, in case you do get moisture on the chill plate from opening/closing the door. I have a sanyo, but I did mine on the hump for the compressor- typically there's not even any insulation down there.
MoRoToRiUm is offline
 
Reply With Quote
Old 12-11-2008, 03:10 AM   #6
jsteurer
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2006
Location: louisville, KY
Posts: 7
Default

I saw a Darby Kegerator that is similar to my refrigerator and it was drilled in the top left corner on the back. I'm think of doing the same. Has anyone try doing this option?
jsteurer is offline
 
Reply With Quote
Old 01-23-2010, 02:32 AM   #7
ruffdeezy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: New West, BC
Posts: 430
Liked 5 Times on 5 Posts

Default

Anyone have an answer to this question?
Does anyone have a danby kegerator 4.4cf model that keep the co2 bottle outside? I've had mine inside for a while now but I would prefer to keep it outside. Where did you drill the hole for the line? I want to keep the drain hole for draining.
thanks


ruffdeezy is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Perlick tap on Danby jeepmanmike Kegerators and Keezers 5 10-28-2009 04:51 PM
Using 1/4" braided line for beer line - ok? bmckee56 Bottling/Kegging 12 02-22-2009 07:40 AM
Danby 4.4 cu. ft. big enough for 2? Brewme Bottling/Kegging 9 01-06-2009 03:52 AM
Danby Chill 'n Tap?? TWilson Bottling/Kegging 12 03-16-2008 05:18 AM
Danby kegerator tbulger Equipment/Sanitation 4 10-29-2007 03:05 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS