Hefe Brew Day - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Home Brewing Photo Forum > Hefe Brew Day

Reply
 
Thread Tools
Old 09-03-2008, 02:52 AM   #1
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,281
Liked 794 Times on 506 Posts



Just brewed up another 5 gallons of my Pistols 'n Pesos recipe (see dropdown). It's the first brew on the new deck, second brew at the new house, and second batch sparge ever (no, I'm not a convert...yet). Hit the numbers almost perfectly! ...a pleasant surprise after my last batch came up a little shy.

I was going to do a Bavarian hefe that would be ready in time for Oktoberfest, but I forgot that I have a TON of K-97 on hand, so I elected to do an American wheat, instead. This is my first batch of beer with that particular strain. I'm pitching a little warm, and the fermentation will be in a 74°F environment. Tasting notes to follow.

I also decided to try out the olive oil trick with this one. I rehydrated the yeast in a small, sanitized bowl that had about two drops of oil in the bottom. I'm not going to set up an experiment with a control, but I'll monitor the lag time and fermentation activity and compare it with previous batches.



__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Old 09-03-2008, 02:54 AM   #2
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


Nice deck Yuri. Looks good.


__________________
Make Beer, Not War.

 
Reply With Quote
Old 09-03-2008, 03:08 AM   #3
Professor Frink
 
Professor Frink's Avatar
Recipes 
 
Sep 2006
San Diego, CA
Posts: 3,085
Liked 19 Times on 16 Posts


Nice deck, did you go with cedar planks?
__________________
Primary: Cherrywood Smoked Porter
60 Minute IPA
Secondary:
On tap:Amber Ale
Milk Stout

Lagering:


http://www.lazydogbrewery.com

 
Reply With Quote
Old 09-03-2008, 04:00 AM   #4
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,281
Liked 794 Times on 506 Posts


Pressure treated with a nice weatherproofing stain.
__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Old 09-03-2008, 04:10 AM   #5
Professor Frink
 
Professor Frink's Avatar
Recipes 
 
Sep 2006
San Diego, CA
Posts: 3,085
Liked 19 Times on 16 Posts


Good call. My parents used cedar planks on their deck and it didn't last 5 years. They just replaced it with the composite planks.
__________________
Primary: Cherrywood Smoked Porter
60 Minute IPA
Secondary:
On tap:Amber Ale
Milk Stout

Lagering:


http://www.lazydogbrewery.com

 
Reply With Quote
Old 09-03-2008, 04:20 AM   #6
Fingers
HBT_SUPPORTER.png
 
Fingers's Avatar
Recipes 
 
Jan 2007
Lac du Bonnet, Manitoba
Posts: 4,216
Liked 45 Times on 36 Posts


So how did your efficiency do as compared with your usual fly sparging? If lower, was it low enough to justify a return to fly sparging? You sort of hinted at something like that. Come clean now!
__________________
If you can't fix it with a hammer, you've got an electrical problem.

 
Reply With Quote
Old 09-03-2008, 04:27 AM   #7
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,281
Liked 794 Times on 506 Posts


Professor - I couldn't justify the cost of the composite stuff. I could replace the pressure treated decking about 3 times for the same price.

Fingers - I hit nearly 80% (actually had to cut the amount of honey in order to nail the OG, since the recipe was based on 75%). I routinely get up to 85% when I fly sparge. I don't really like the batch sparge process. I'd rather set the grain bed once and filter everything through it. Of course, if I had a braid instead of a false bottom, it wouldn't be as big of a deal. With the false bottom, I find that I have to vorlauf quite a bit during the second and subsequent runnings. Even so, I'm getting a cloudier wort than I prefer. However, the local water is AWESOME. I'm getting some of the biggest break material I've ever seen, and the last batch cleared very quickly. Over the next few months, I'll be building some new equipment that should make fly sparging a breeze. For now, I'm just doing some small, simple batches while I get geared up again.
__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Old 09-03-2008, 04:50 AM   #8
Arneba28
 
Arneba28's Avatar
Recipes 
 
Feb 2008
Amherst, Western New York
Posts: 2,193
Liked 17 Times on 12 Posts


Quote:
Originally Posted by Professor Frink View Post
Good call. My parents used cedar planks on their deck and it didn't last 5 years. They just replaced it with the composite planks.
When I used to be in construction I loved this stuff. The material I was using was made out of recycled pop bottles. You could get it in any color, heavy as sin. But no splinters. Built in bug repelent(no bees, wasps, hornet nests) and easier to cut, drill and nail through that any traditional decking material. And again, EXPENSIVE as HELL.

This unscheduled interruption was brought to you be

Arneba28, and other people that support your local composite decking materials


Now back to your regularly scheduled brewing conversations.
__________________
My Kegerator Project

 
Reply With Quote
Old 09-04-2008, 01:55 AM   #9
sully
Recipes 
 
Jul 2007
Posts: 193
Liked 1 Times on 1 Posts


that looks great for pressure treated, i live in socal and all of our pressure treated is bright green, was this stuff bright green?

 
Reply With Quote
Old 09-04-2008, 02:04 AM   #10
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,281
Liked 794 Times on 506 Posts


It was sort of a dull gray/green. Not bright, but not appealing, either.


__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hugh Hefe Brew Day 7-18-09 (Saturday) The Pol Recipes/Ingredients 42 07-31-2009 06:39 AM
first brew Hefe Q's, did i mess this up? zachatola Beginners Beer Brewing Forum 23 11-16-2008 12:09 AM
Opinion: Can I brew a Hefe before March 15 Trappist Artist General Techniques 16 03-18-2008 07:59 PM
Second AG (hefe brew) trev All Grain & Partial Mash Brewing 3 05-08-2007 02:40 PM
Hefe-Weizen for my first AG Brew billism Recipes/Ingredients 4 03-01-2006 04:42 AM


Forum Jump