I am trying to lock in a Widmer Hefeweizen recipe and after looking at a few different ideas and drinking their beer... We decided to go with a slightly changed version of Saccharomyces's partial mash recipe! Here is exactly what we did:
- 1lb Munich
- 0.25lb Crystal 40
- 5lbs Wheat DME
- 0.50oz Hallertauer 45 min (4.8% AAU@ 1oz)
- 0.50oz Cascade 10 min (6.8% AAU @1oz)
- 0.50oz Willamette 10 min (4.8% AAU @ 1oz)
- 1Tbsp White General Purpose Flour @ Flame Out
Wyeast 1010 or White Labs WLP320
Steep Munich and Crystal malts for 45 minutes at 152°F in 2 gallons of water. Add 4 gallons of water, and bring to a boil. Once boiling remove from heat and add 5 lbs. Wheat DME, stir until completely dissolved. Bring back up to a boil while watching for boil over!
. After obtaining a soft roiling boil, start a timer for 45 min and add Hallertauer hops and continue to boil. At the 15 minutes remaining mark, add your wort chiller to the boiling wort to sanitize. At the 10 min remaining mark, add your Cascade and Willamette hops. Once the 45 minutes is up, remove wort from heat and sift/stir in flour. Cool wort to below 75° before straining (not filtering
) into primary bucket and then pitch yeast. Store in a dark cool place according to the directions found on your yeast packet. To prevent clogged airlocks use a blow off tube during fermentation.
Notes: Our 40,000 b.t.u. burner and 7.5 gallon pot took a while to reach boil, however the 6 gallons made just enough wort to reach the 5 gallon mark on the fermentation bucket. After tasting the sample vs the real Widmer beer, our hops might be a little weak, time will tell, but it's close! Color looks to be spot on. O.G. was 1.048 (corrected for temp). This is the first brew I had to fight (hard) to stop from boiling over, the DME really locked in the heat on the smaller pot. The flour turned into little dough balls. We used a grain sack and a colander to aerate the wort and try to catch the dough balls (we never found them). It's currently sitting in the cellar at approx 63°. We will not be using a secondary fermentation vessel.