Order from McMaster Carr! - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Order from McMaster Carr!

Reply
 
Thread Tools
Old 08-13-2008, 11:47 PM   #1
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts



6
Each 6739K64 Straight Through Coolant Hose Coupling Sleeve-Lck Sckt X Barb for 1/2" Hose ID, 3/8" Cplg Sz $6.01 $36.06 in the morning

7
Each 6739K59 Straight Through Coolant Hose Coupling Plug, 1/2" NPTF Male, 3/8" Coupling Size $1.75 $12.25 in the morning

2
Each 50915K328 Standard Brass Compression Tube Fitting Adapter for 1/2" Tube OD X 1/2" NPTF Male Pipe $3.67 $7.34 in the morning

1
Pack 5307K48 1/2" NPT Male Connector for 1/2" ID Snap-Loc Any-Which-Way Coolant Hose, Packs of 4 $5.27 $5.27 in the morning

2
Packs 10095K45 1' of 1/2" ID Loc-Line Any-Which-Way Coolant Hose, Packs of 1 $6.94 $13.88 in the morning

1
Pack 10095K25 1/2" Diameter Round Nozzle for 1/2" ID Loc-Line Any-Which-Way Coolant Hose, Packs of 4 $4.65 $4.65 in the morning

3
Each 50785K94 Med-Pressure Extruded Brass Thrd Pipe Fitting 1/2" Pipe Size, Hex Coupling, 1-3/16" Length $2.41 $7.23 in the morning

Applicable shipping charges and tax will be added.

I really wish that they didnt add the tax and shipping AFTER the order is placed... what would shipping be on an order like this? It is ground only...

 
Reply With Quote
Old 08-14-2008, 12:25 AM   #2
DeathBrewer
Maniacally Malty
HBT_LIFETIMESUPPORTER.png
 
DeathBrewer's Avatar
Recipes 
 
Apr 2007
Oakland, CA
Posts: 21,790
Liked 261 Times on 134 Posts


i love mcmaster

shipping shouldn't be too much, maybe $10.00
__________________
Easy Partial Mash Brewing - Stovetop All-Grain Brewing

"Death is always with us." - Brewpastor

Quote:
DIAICYLF
We will remember...

 
Reply With Quote
Old 08-14-2008, 12:38 AM   #3
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


Setting up the last components for my HERMS. QD's, compression fittings to attach the HERMS coil to the QD's through the lid of the cooler... Also removing my SS sparge arm and replacing it with a 1/2" flexible coolant line that is 2' long so that I can use it for recirculating and sparging. Cant wait to get a brew on my system in Sept! Then I can start spending my money on ingredients, not components!

POL

 
Reply With Quote
Old 08-14-2008, 01:40 AM   #4
ScubaSteve
HBT_SUPPORTER.png
 
ScubaSteve's Avatar
Recipes 
 
May 2007
New Bern, NC
Posts: 3,677
Liked 83 Times on 57 Posts


McMaster is hella fast. My stuff showed up the next day. You'll like those QD's.....good choice. Do you have any pics/details on that cooling line? That sounds like just what I need for easy adjustment of the recirc ring....

 
Reply With Quote
Old 08-14-2008, 04:04 AM   #5
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


The coolant line can be looked up on McMaster by doing a seach on "coolant line". It is a segmented line, that can be bent to any shape you desire, and is not supposed to change shape unless you do it. It is also rated to work with liquids up to 200F. I needed a SINGLE line to use for recirc and sparge... and a sparge arm would get plugged with grain during the recirc.

 
Reply With Quote
Old 08-14-2008, 10:33 AM   #6
ScubaSteve
HBT_SUPPORTER.png
 
ScubaSteve's Avatar
Recipes 
 
May 2007
New Bern, NC
Posts: 3,677
Liked 83 Times on 57 Posts


Sorry man....I guess that came off as a stupid question....I didn't realize you also bought the coolant line from McMaster...but now I see it's 3/4 of the way down your list .

Nevertheless, I might have to get down with that

 
Reply With Quote
Old 08-14-2008, 12:39 PM   #7
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


No problem Scuba... I have seen someone else use this item before in thier system, so I thought Id give it a shot. I like the rotating sparge arm, but for a simpler and cleaner build, I thought Id resort to ONE piece of plumbing going through the lid, and if I had a sparge arm installed, it would not be able to rotate with another tube running down into the cooler. I designed this setup so that everything seals through the lids... the tubes from the heat exchange coil, thermowell, recirc/sparge plumbing etc... to make it as efficient as possible. They will all have a coupling, and the hoses will simply attach to a QD that is threaded through the lid. I will have a fair ammount of construction to do when I get home this week, but it shouldn't take TOO long to complete, then I will get some pics up.

POL

 
Reply With Quote
Old 08-15-2008, 11:52 AM   #8
The Pol
Recipes 
 
Feb 2007
Posts: 11,454
Liked 96 Times on 81 Posts


ONE day delivery, with standard ground? I LOVE THIS PLACE! The HERMS will be pieced together today! YAY!

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
McMaster Carr help wildwest450 Equipment/Sanitation 10 11-08-2009 06:08 PM
McMaster Carr ROCKKSSSS again! The Pol General Beer Discussion 16 06-26-2009 01:34 AM
McMaster-Carr will not sell to me... ivanavich Bottling/Kegging 21 05-21-2009 02:34 PM
QD part # for McMaster Carr? givemaboot Equipment/Sanitation 7 02-28-2009 10:31 PM
McMaster-Carr FTW. flyangler18 DIY Projects 31 02-27-2009 06:03 PM


Forum Jump