Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Have question!!
Reply
 
Thread Tools
Old 03-25-2006, 03:27 PM   #1
Igorstien
Feedback Score: 0 reviews
 
Igorstien's Avatar
Recipes 
 
Join Date: Aug 2005
Location: Fredericton, NB
Posts: 185
Liked 1 Times on 1 Posts

Default Have question!!

Hey Y'all

I finally got my CO2 and regulator and got it filled yesterday.

I now have everything that I need, and my batch is ready to be transferred to the soda keg.

My question is involving the seal from the regulator to the CO2 tank. Is teflon tape ok for this fitting? I didn't notice any 0-rings in the regulator kit. The only thing that was there was a round thin piece of plastic, but doesnt' appear to have any sealing properties. I was also, going to put teflon on the soda keg, where the pin-lock post attach to the keg...Just for extra protection...it just can't hurt it!!

Any thoughts....I'm pretty excited!!!

Thanks,
IGOR


__________________
Igor Stien

Fermenting: MT
Secondary #1: MT Secondary #2: MT
Conditioning: Nothing Drinking: Store bought
On Deck: Festa Brew Red Ale....As soon as I get my bucket back from storage.

All bottles are Guinness bottles, Plus Five Kegs!!!
Igorstien is offline
 
Reply With Quote
Old 03-25-2006, 04:00 PM   #2
Igorstien
Feedback Score: 0 reviews
 
Igorstien's Avatar
Recipes 
 
Join Date: Aug 2005
Location: Fredericton, NB
Posts: 185
Liked 1 Times on 1 Posts

Default

Nevermind I Figured it out.......When all else fails Read the instructions.


__________________
Igor Stien

Fermenting: MT
Secondary #1: MT Secondary #2: MT
Conditioning: Nothing Drinking: Store bought
On Deck: Festa Brew Red Ale....As soon as I get my bucket back from storage.

All bottles are Guinness bottles, Plus Five Kegs!!!
Igorstien is offline
 
Reply With Quote
Old 03-25-2006, 05:26 PM   #3
david_42
Feedback Score: 0 reviews
 
david_42's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Willamina & Oak Grove, Oregon, USA
Posts: 25,673
Liked 141 Times on 134 Posts

Default

Actually, some regulators have O-rings, some use the flat plastic washer. I've heard of people tossing the washer and damaging their regulator trying to stop the leakage. I'm having fun trying to combine two regulators. I got the high pressure guage off of one, but can't get the tank line off of the other. Some left-handed gorilla must have tightened it!
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk
david_42 is offline
 
Reply With Quote
Old 03-25-2006, 07:29 PM   #4
Bernie Brewer
Grouchy Old Fart
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Bernie Brewer's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Eldorado, WI
Posts: 7,537
Liked 135 Times on 54 Posts
Likes Given: 2

Default

Hey post a pic of your setup I'd like to see it.
__________________
I like to squeeze the nickle until the buffalo craps-mt rob

"Why don't we get drunk and screw?" Jimmy Buffett
Bernie Brewer is offline
 
Reply With Quote
Old 03-26-2006, 05:11 PM   #5
casebrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2005
Location: San Diego
Posts: 850
Liked 6 Times on 6 Posts

Default

David 42, some heat will breakdown thred-locker. But not so much to destroy the guts of the regulator....blow dryer? soldering iron held to the spot? Or try the other regulator, maybe it ain't so stuck?


__________________
So far, I've had more experience thinking than I've had brewing....you don't think they are mutually exclusive, do you?

72 batches so far,
48 wine, mostly Loquat, peach, plum, prickly pear
23 beers and ciders
1 sauerkraut
1 Tequila, from a prickly pear wine experiment that didn't work. I call it "Prickly Heat"
casebrew is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
A question about Coriander in a porter and another question about yeast tired Recipes/Ingredients 7 01-28-2009 11:55 PM
Malt Rating Question (newbie question) LumberjackJohn Recipes/Ingredients 3 12-09-2008 06:22 PM
Recipe Sparge Question (Beersmith Question) IrregularPulse All Grain & Partial Mash Brewing 8 06-26-2008 06:10 PM
Making Chocolate Oatmeal stout. OG question and smack pack starter Question. britishbloke Beginners Beer Brewing Forum 10 02-23-2007 06:01 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS