Will this regulator work? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Will this regulator work?

Reply
 
Thread Tools
Old 08-11-2008, 05:04 PM   #1
Wrathbone
Recipes 
 
Apr 2008
Santa Monica, CA
Posts: 277
Liked 3 Times on 3 Posts



I'm putting together my kegerator, and came across this regulator on ebay. I will be running 2 kegs of one tank, and would like to run different pressures on the kegs, for carbing as well as having different pressures depending on the beer.

clicky here

It doesn't have any shutoffs, is that something I can pick up at the hardware store and add on?
__________________


On Deck:
Primary- Reboot Pale
Secondary-
Kegged/Aging-
On Tap- Experimental Pumpkin Wheat-ish


 
Reply With Quote
Old 08-11-2008, 05:11 PM   #2
EdWort
HBT_LIFETIMESUPPORTER.png
 
EdWort's Avatar
Recipes 
 
Jul 2006
Bee Cave, Texas
Posts: 11,912
Liked 342 Times on 169 Posts


Looks good. Pick up a couple of valves with built in checkvalves and you are good to go.

Get them at Northernbrewer or Austin Homebrew Supply.


 
Reply With Quote
Old 08-11-2008, 05:18 PM   #3
BigKahuna
Senior Member
HBT_LIFETIMESUPPORTER.png
 
BigKahuna's Avatar
Recipes 
 
Feb 2008
Eastern Colorado
Posts: 5,970
Liked 52 Times on 45 Posts


Looks ok, WAY Too Cheap at the moment, There are no Free Lunches.
__________________
Seriously. I'm here for BEER
It's Not The Size Of Your Rig That Counts....It's How Often You Use It.

 
Reply With Quote
Old 08-11-2008, 05:25 PM   #4
johnsma22
HBT_SUPPORTER.png
 
johnsma22's Avatar
Recipes 
 
Jun 2006
Taunton, MA
Posts: 1,967
Liked 82 Times on 61 Posts


Looks to be OK. Besides adding some shutoff/check valves to it, I would also replace the two low pressure gauges. The range on the first one is 0-160 psi and the second one is 0-100 psi. Neither of those are very good for dialing in accurate pressures under 20 psi. 0-30 psi gauges are much better suited for our needs.
__________________
Cheers,
John

 
Reply With Quote
Old 08-11-2008, 06:24 PM   #5
Wrathbone
Recipes 
 
Apr 2008
Santa Monica, CA
Posts: 277
Liked 3 Times on 3 Posts


So would I just be better off getting THIS instead? I know the gauges are still 0-60, but I think I would need gauges a little higher for force carbing, etc.
__________________


On Deck:
Primary- Reboot Pale
Secondary-
Kegged/Aging-
On Tap- Experimental Pumpkin Wheat-ish


 
Reply With Quote
Old 08-11-2008, 09:00 PM   #6
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,597
Liked 155 Times on 145 Posts


I prefer 0-60 gages. I don't force carb much, but I do make soda.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 08-11-2008, 09:03 PM   #7
johnsma22
HBT_SUPPORTER.png
 
johnsma22's Avatar
Recipes 
 
Jun 2006
Taunton, MA
Posts: 1,967
Liked 82 Times on 61 Posts


That looks like a pretty nice piece, at a decent price for a double primary regulator. Those 0-60 psi gauges will be fine and it comes with 1/4" flare shutoff/check valves already installed. I say go for it.
__________________
Cheers,
John

 
Reply With Quote
Old 08-11-2008, 09:10 PM   #8
johnsma22
HBT_SUPPORTER.png
 
johnsma22's Avatar
Recipes 
 
Jun 2006
Taunton, MA
Posts: 1,967
Liked 82 Times on 61 Posts


FWIW, I have a primary regulator (Micromatic Premium) that has a 0-60 lowside gauge, which is perfect for reading higher carb'd beverages, like soda. The primary is split with a Y. One side goes to my root beer keg and the other side feeds the inlet of my dual secondary regulator. The secondary reg has the 0-30 psi gauges for fine control of lower carb'd beverages.

I like the Micromatic Premium regulators because you can adjust the output pressure by hand without the use of a screw driver.

__________________
Cheers,
John

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Will this Regulator work? Jmac00 Bottling/Kegging 10 03-20-2009 01:53 PM
Will this regulator work for kegging? zanemoseley Bottling/Kegging 7 02-01-2009 03:35 PM
Will this regulator work? DLDave1978 Bottling/Kegging 3 11-06-2008 05:03 PM
Will this regulator work? fishnfever Bottling/Kegging 8 09-22-2008 07:59 PM
Will this regulator work for Kegging? redneckbeagle Equipment/Sanitation 2 01-25-2008 06:33 PM


Forum Jump