Is my Mash Tun Large enough? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Is my Mash Tun Large enough?

Reply
 
Thread Tools
Old 08-07-2008, 05:16 AM   #1
gonzo brewer
 
gonzo brewer's Avatar
Recipes 
 
Jun 2007
Santa Clarita, CA
Posts: 258
Liked 1 Times on 1 Posts



I plan to brew my first 10 gallon Batch. I have a 48 quart Rectangular Ice chest Mash Tun with a copper manifold. Will a 28lb grain bill fit? I usually mash at 1.25 quart/lb. and batch sparge. Beersmith shows 36 quarts mash in.

I think I can do it, but I will probably have to mash out at less than 168º in first runnings due to limited space - or do a fakey fly sparge to get the mash out temp up.

Would you attempt this?
__________________
Primary:Black Friday Pale
Secondary:
Bottled: Founder's Breakfast Stout, Preto Branco (Black Orchard clone)
Kegged:Brown, WCIPA, orange cascade, Amber, Vanilla Porter
On Deck: APA, RyeIPA, Kolsch

 
Reply With Quote
Old 08-07-2008, 05:23 AM   #2
Arneba28
 
Arneba28's Avatar
Recipes 
 
Feb 2008
Amherst, Western New York
Posts: 2,193
Liked 17 Times on 12 Posts


Hell Yeah. How you going to know if it works if you dont do it. Instead of mashing out low why dont you batch sparge it twice. Hotter each time, will that work.
__________________
My Kegerator Project

 
Reply With Quote
Old 08-07-2008, 05:31 AM   #3
gonzo brewer
 
gonzo brewer's Avatar
Recipes 
 
Jun 2007
Santa Clarita, CA
Posts: 258
Liked 1 Times on 1 Posts


Yeah, probably no choice - I usually mashout at 160-165º, then 2 equal sparges at around 170º.
Since I am mashing my IPA at 150º, it will take quite a bit of boiling water to get the temp up to 170º range.

I fear I will lose a little efficiency - should I bump up the grain bill a tad?
__________________
Primary:Black Friday Pale
Secondary:
Bottled: Founder's Breakfast Stout, Preto Branco (Black Orchard clone)
Kegged:Brown, WCIPA, orange cascade, Amber, Vanilla Porter
On Deck: APA, RyeIPA, Kolsch

 
Reply With Quote
Old 08-07-2008, 05:32 AM   #4
Blender
 
Blender's Avatar
Recipes 
 
Jan 2006
Santa Cruz, CA.
Posts: 3,106
Liked 8 Times on 5 Posts


You could add the 36 quarts of water to the cooler and then determine if there will be enough room for the grain before you try it. That would be playing it safe and you could then use the water for the mash. I think that is the way I would go if I was unsure.
__________________
Gary

 
Reply With Quote
Old 08-07-2008, 05:42 AM   #5
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


Check out the "can I mash" it calculator here. Looks like you will be able to pull it off if you go with a 1qt per pound water to grain ratio.
__________________
Make Beer, Not War.

 
Reply With Quote
Old 08-07-2008, 05:50 AM   #6
gonzo brewer
 
gonzo brewer's Avatar
Recipes 
 
Jun 2007
Santa Clarita, CA
Posts: 258
Liked 1 Times on 1 Posts


Great calculator. Looks like I will be very close. I will start at 1.0 quart/lb, add the grain and then thin down the mash based on whatever room I have left in the cooler. Maybe I'll go 3 equal batch sparges to get all the sugars out.

Thanx
__________________
Primary:Black Friday Pale
Secondary:
Bottled: Founder's Breakfast Stout, Preto Branco (Black Orchard clone)
Kegged:Brown, WCIPA, orange cascade, Amber, Vanilla Porter
On Deck: APA, RyeIPA, Kolsch

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Large Partial Mash Batch - All-Grain Technique? goofiefoot All Grain & Partial Mash Brewing 4 09-26-2009 10:32 PM
Is this a viable solution for those that don't have large wort pot/mash tun? BarleyAndApple Beginners Beer Brewing Forum 5 09-15-2009 03:04 PM
is my Mash tun large enough Wild Duk All Grain & Partial Mash Brewing 4 08-04-2009 04:44 PM
How large does my mash tun need to be? Lazybrew Beginners Beer Brewing Forum 7 11-09-2008 12:23 AM
Judging Mash Temp in a Large Tun Jekster All Grain & Partial Mash Brewing 5 06-27-2008 08:02 PM


Forum Jump