what parts will i need? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > what parts will i need?

Reply
 
Thread Tools
Old 07-25-2008, 07:42 PM   #1
benpen
Recipes 
 
Jun 2008
Evansville, IN
Posts: 20
Liked 1 Times on 1 Posts



So i went ahead and ordered a cornelius keg. I already have a co2 tank and regulator that is in my current kegerator. I'm wanting to turn a cooler into a kegerator for going to parties and such events. Since i already have a co2 tank and regulator what else besides tubing and a faucet will i need. can i use a sanke keg coupler on this keg it doesn't look like it will work. thanks for any help given

BEN

 
Reply With Quote
Old 07-25-2008, 07:56 PM   #2
Chriso
Broken Robot Brewing Co.
HBT_LIFETIMESUPPORTER.png
 
Chriso's Avatar
Recipes 
 
Oct 2007
Someplace, Nebraska
Posts: 4,681
Liked 76 Times on 66 Posts


You will need either a ball-lock or a pin-lock quick disconnect, depending on which style of corny keg you bought. You'll need 2 - one for liquid, one for gas.

You should read through a couple links in the Kegging sticky, located here: http://www.homebrewtalk.com/showthread.php?t=43347

From left-to-right:
CO2 tank -> regulator -> fitting to hose -> hose -> fitting to QD -> gas-side QD -> Keg
Keg -> Liquid QD -> fitting to hose -> hose -> fitting to nipple -> nipple -> shank -> Faucet.

Brownish is beer, Blue is gas-side.
__________________
BROKEN ROBOT BREWING CO.

Chriso || BJCP Certified || SMaSH Brewers, Unite! || Nebraska Brewers! || Lincoln Lagers Brew Club
"You have just experienced the paradigm shift that is....all grain brewing." - BierMuncher

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What parts do I need to keg? eatpuppies Bottling/Kegging 13 05-19-2009 08:25 PM
Parts akflyer General Beer Discussion 1 03-31-2009 04:36 PM
Keg parts nitrousjunkie Bottling/Kegging 3 06-01-2008 04:45 PM
looking for parts? jelsas DIY Projects 4 06-01-2007 01:16 AM


Forum Jump