Keg Force Carbing Methods Illustrated - Page 67 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Keg Force Carbing Methods Illustrated

Reply
 
Thread Tools
Old 02-10-2013, 05:45 PM   #661
jeepinjeepin
 
jeepinjeepin's Avatar
Recipes 
 
Apr 2011
Winston-Salem, NC
Posts: 6,411
Liked 1047 Times on 1026 Posts


Quote:
Originally Posted by Laoz
Planned on racking my first batch to a corny and getting another going tomorrow but wasn't able to get my co2 filled this week. Stores closed tomorrow. Any issue racking then hooking up the co2 a day or 2 later?
Quote:
Originally Posted by Kealia
Opinions will vary but I would just wait until you have your co2. Right now your beer has a nice layer of co2 protecting it but when you move it to the corny that will be gone if yoy can't purge the oxygen.
As long as you haven't cold crashed it you can rack it and add priming sugar. Personally, I would wait.
__________________
Walmart is about the only reason for open or concealed carry that I can get behind. -Randar

 
Reply With Quote
Old 02-11-2013, 12:40 PM   #662
Laoz
Recipes 
 
Feb 2013
Posts: 23

I was able to find co2 yesterday after all! $30 to swap out a 2.5lb tank can't be my best option going forward tho. My first batch, an ipa, tasted good! Racked and brewed a porter. Rolling! Think I'll need to rig a bigger co2 outside my kegerator to get this 2 keg plan setup for long term use. Alls well. Thx for for advice.

 
Reply With Quote
Old 02-11-2013, 01:46 PM   #663
BigB
 
BigB's Avatar
Recipes 
 
Dec 2009
Shelby Twp, MI
Posts: 1,755
Liked 47 Times on 41 Posts


Quote:
Originally Posted by Laoz View Post
$30 to swap out a 2.5lb tank
Ouch... That is steep. I pay around $20 to swap out a 20# tank. Heck a 5# tank at my LHBS (which is always higher than everyone else for gas) is only $14.
__________________
I love the sound of an airlock bubbling in the morning. It sounds like.....VICTORY.

Quote:
Originally Posted by TxBrew
It's now degenerating into nu uh and uh huhs and it no longer serves a point.

 
Reply With Quote
Old 02-11-2013, 03:37 PM   #664
Sippin37
HBT_LIFETIMESUPPORTER.png
 
Sippin37's Avatar
Recipes 
 
Oct 2010
Chicago
Posts: 1,032
Liked 39 Times on 37 Posts


Quote:
Originally Posted by Laoz View Post
I was able to find co2 yesterday after all! $30 to swap out a 2.5lb tank can't be my best option going forward tho. My first batch, an ipa, tasted good! Racked and brewed a porter. Rolling! Think I'll need to rig a bigger co2 outside my kegerator to get this 2 keg plan setup for long term use. Alls well. Thx for for advice.
My kegerator also came with a 2.5 lb tank. I am just barely able to fit a 5 lb tank inside of it now. I just keep my 2.5 lb tank full in case I run out of gas at a bad time and need to use it.
__________________
"24 hours in a day, 24 beers in a case. Coincidence?"
-- Stephen Wright

 
Reply With Quote
Old 02-12-2013, 12:39 PM   #665
Laoz
Recipes 
 
Feb 2013
Posts: 23

I have a nostalgia krs2100. Might fit a 5lb tank at an angle on the back ledge and 2 cornys but I'm leaning towards no. Anyone know? Rather not drill if I can avoid it.

 
Reply With Quote
Old 02-12-2013, 02:05 PM   #666
Sippin37
HBT_LIFETIMESUPPORTER.png
 
Sippin37's Avatar
Recipes 
 
Oct 2010
Chicago
Posts: 1,032
Liked 39 Times on 37 Posts


Quote:
Originally Posted by Laoz View Post
I have a nostalgia krs2100. Might fit a 5lb tank at an angle on the back ledge and 2 cornys but I'm leaning towards no. Anyone know? Rather not drill if I can avoid it.
Well I have my 5 lb tank sit on the back ledge of my Frosty Keg kegerator. The tank measures 18" tall and with the regulator dials they add about 1.5" taller than the tank. So if you go atleast 20" of vertical clearance from the ledge to the ceiling then I'd say you are fine. Hope that helps!
__________________
"24 hours in a day, 24 beers in a case. Coincidence?"
-- Stephen Wright

 
Reply With Quote
Old 02-27-2013, 05:47 PM   #667
drew4brew
Recipes 
 
Feb 2013
Posts: 17
Liked 6 Times on 4 Posts


I've made it up to page 48 and my eyes are crossed!
Was wondering this... if the patient method required 2 weeks of waiting and this can be done at room temperature, can the last 2 weeks of secondary conditioning be performed in the keg while it's carbonating at room temp (ie; 68-70)?
Scenario; I've racked from primary to secondary after 1 week. Beer has been in secondary for 1 week and a little more settlement has appeared, but not much.
If it's possible to finish out the conditioning in the keg, I understand that I might have some sediment in the bottom--I can simply discard a pint.
Can I condition and carbonate at the same time?

 
Reply With Quote
Old 02-27-2013, 10:18 PM   #668
JayMac
Recipes 
 
Jun 2012
Guelph, Ontario
Posts: 271
Liked 11 Times on 10 Posts


Yes you can. However, some of the clean up for by the yeast during conditioning is more efficient at higher temperatures, leading to a more rounded beer faster. But if you're in a hurry to get the beer on tap, you can hook er up.

You can cold crash the beer before transferring to the keg in order to minimize the trub in the keg. 2 days in the fridge should be good to get most of it dropped out

 
Reply With Quote
Old 02-27-2013, 11:10 PM   #669
drew4brew
Recipes 
 
Feb 2013
Posts: 17
Liked 6 Times on 4 Posts


"However, some of the clean up for by the yeast during conditioning is more efficient at higher temperatures"

right... in the query; "and this can be done at room temperature, can the last 2 weeks of secondary conditioning be performed in the keg"

Is room temperature considered "higher temperature". I'm trying to figure out if I can combine the two procedures into one at room temperature. Sorry if my question was poorly asked but with the "however" stipulation in the reply lead me to believe that I may have misconstrued my thoughts..

 
Reply With Quote
Old 02-28-2013, 12:15 AM   #670
JayMac
Recipes 
 
Jun 2012
Guelph, Ontario
Posts: 271
Liked 11 Times on 10 Posts


Sorry, I misread your post. I thought you were asking if you could do this all in the fridge despite your temperature statements! Stupid me.

Yes you can do that. Since my CO2 is in my keg fridge, i would need to chill and carb my beer at the same time as try need to be hooked up for the entire process. This is where my temperature and conditioning time comes in to play.
The additionally pressure shouldn't have a significant impact on conditioning, so you're fine to go ahead and do that. Sorry about the misinterpretation'

Cheers

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Force Carbing in a day? skeeordye11 Bottling/Kegging 7 01-19-2009 04:18 PM
Force Carbing Dominator6 Bottling/Kegging 5 05-04-2008 04:05 AM
how much force carbing? ski36t Bottling/Kegging 4 03-30-2007 02:59 PM
Force Carbing? MilwaukeesBus Bottling/Kegging 9 03-14-2007 10:07 PM
Need help with force carbing Craig5_12 Bottling/Kegging 21 03-03-2007 04:36 PM


Forum Jump