Take it to the next level - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Take it to the next level

Reply
 
Thread Tools
Old 07-11-2008, 01:35 AM   #1
addis29
Recipes 
 
Feb 2008
Marietta, OHIO
Posts: 162



I am brewing with the straight bascis that everyone probably started with. Plastic buckets and glass carboys. What is next? How can I improve what I'm doing. I started this as a hobby and I am hooked. I would like I said, take it to the next level. Some of the equipment is a little pricey. Any tips on what is most important to make a better brew.

 
Reply With Quote
Old 07-11-2008, 01:51 AM   #2
s3n8
Recipes 
 
Jan 2008
Haymarket VA
Posts: 1,172
Liked 3 Times on 3 Posts


Many people say going all grain and controlling temperatures during fermenting offer the biggest improvement. I recently started all grain brewing, and control temps during fermentation with an ice cube cooler and ice packs. I know this is not as precise as a fridge with temp controller, but it is the right price right now.

 
Reply With Quote
Old 07-11-2008, 02:01 AM   #3
ben_j8mmin
Recipes 
 
Apr 2008
Posts: 104
Liked 2 Times on 2 Posts


Thats the fun of it. its up to you.
Would more complicated/automated process be more fun?
yeast farming?
get real technical w/ your water?
or even build a bar to serve it all at.
Ben

 
Reply With Quote
Old 07-11-2008, 02:08 AM   #4
Professor Frink
 
Professor Frink's Avatar
Recipes 
 
Sep 2006
San Diego, CA
Posts: 3,085
Liked 19 Times on 16 Posts


If you have the room, I recommend going to all-grain. It's a minimal investment, especially if you're already doing full boils, and you'll see a noticeable difference.
__________________
Primary: Cherrywood Smoked Porter
60 Minute IPA
Secondary:
On tap:Amber Ale
Milk Stout

Lagering:


http://www.lazydogbrewery.com

 
Reply With Quote
Old 07-11-2008, 02:12 AM   #5
CGengo
Recipes 
 
Jan 2008
Belton, TX
Posts: 137

I just took the next step from where you are and it made a world of difference in my last brew. The biggest issues I was facing were chilling the wort quickly and controlling the fermentation temperature (I live in South FL). I purchased a 60' roll of 3/8" copper tubing from Home depot for $60 and made an immersion chiller and post chiller - you just need something to roll it around (I used a small trash can) and a couple hours. Also, if you don't have one, I recommend picking up an auto-siphon. Basically, I use the immersion chiller for about 15 - 20 minutes to get the wort to about 80 degrees, then siphon it through the post chiller which is submersed in an ice bath and directly into the carboy at a final temp around 65 degrees.

Finally, Jamil and John (in Brewing Classic Styles) indicate that the difference between an okay beer and a great beer is in controlling the fermentation, so I picked a Johnson controller and converted a barely used chest freezer into a temp controlled fermentation chamber - it's working out great. I also picked up a 2L flask for making starters (should have gone with the next size up) and upgraded my sanitation from bleach to a big bottle of StarSan, the stuff is great. My next upgrades will probably be to all-grain but that won't be until next year, still working on getting everything else under control.



Good luck,
Chris

 
Reply With Quote
Old 07-11-2008, 02:32 AM   #6
mr_goodwrench
Recipes 
 
Apr 2008
Auburn, GA
Posts: 888
Liked 6 Times on 5 Posts


+1 on the all grain... That was my last step up and I think it was by far the best thing I have done for the quality of my beer so far. My next advance is to start yeast ranching (beginning with the Rogue St Rogue's Red Ale in my beer fridge!)
__________________
Quote:
Originally Posted by MyNameIsPaul View Post
We make beer in buckets with toilet parts and coolers.

 
Reply With Quote
Old 07-11-2008, 04:00 AM   #7
Brett0424
Recipes 
 
Jan 2008
dallas, tx
Posts: 265
Liked 1 Times on 1 Posts


I agree that getting good at all grain will make better beer. But, an easy way to seriously improve your beer (and correct the most common beginner brewing problem) is to control your fermentation temperature. This doesn't mean buy a new fridge and a temp controller, unless you have the space and money to do so. It just means a little rigging and extra effort.

 
Reply With Quote
Old 07-11-2008, 04:38 AM   #8
homebrewer_99
 
homebrewer_99's Avatar
Recipes 
 
Feb 2005
Atkinson (near the Quad Cities), IL
Posts: 17,792
Liked 132 Times on 99 Posts


The next level is repeating good recipes...you don't need to invest in any more equipment (yet)...
__________________
HB Bill

 
Reply With Quote
Old 07-11-2008, 08:02 AM   #9
GuateBrewer
Recipes 
 
Sep 2007
Guatemala
Posts: 102
Liked 1 Times on 1 Posts


+1 Fermentation temp control. IMHO the most critical factor after sanitation.

 
Reply With Quote
Old 07-12-2008, 08:17 PM   #10
addis29
Recipes 
 
Feb 2008
Marietta, OHIO
Posts: 162


thanks for the info and picks.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What level are you? Calvinfan1 General Beer Discussion 80 11-20-2009 12:07 PM
what level??? jesse Bottling/Kegging 1 11-24-2008 09:31 PM
Sea Level Pressure SOB General Beer Discussion 7 07-28-2007 05:32 PM
co2 level on a keg fins2rit Bottling/Kegging 3 04-20-2007 03:31 PM
fill level? timm Bottling/Kegging 2 10-30-2006 08:23 PM


Forum Jump