dual draft tower - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > dual draft tower

Thread Tools
Old 07-10-2008, 06:16 PM   #1
Jul 2008
Harrisburg, PA
Posts: 200

I just bought a used kegerator but I now need a dual draft tower so I can home 2 kegs of homebrew going at once. Does anyone on here have one for sale or can you tell me where to get the best prices. I am hoping I don't have to spend another $100 on one of these! thanks.

Reply With Quote
Old 07-10-2008, 06:22 PM   #2
Arneba28's Avatar
Feb 2008
Amherst, Western New York
Posts: 2,193
Liked 17 Times on 12 Posts

You will spend $100, these are not cheap I just installed mine
I got it from here. They where about $30-50 cheaper then everywhere else and still cheaper then plastic ones.
My Kegerator Project

Reply With Quote
Old 07-10-2008, 06:44 PM   #3
Jun 2008
Austin, TX
Posts: 8

Or if you're feeling handy you can just add a second shank and faucet to the existing tower.


You'll need to drill a second hole, and probably adjust the mounting angle of the tower unless you don't mind the second tap sticking off to the side at a weird angle.

Micromatic sells everything you should need, you can probably get the job done cheaper than buying a new tower and stick with all stainless-steel instead of chrome if you want too.

Reply With Quote
Old 07-10-2008, 06:52 PM   #4
Jun 2008
Brownsburg, IN
Posts: 332
Liked 2 Times on 2 Posts

I've been researching this myself. The only way you can get out with less that $100 is if you go with the chromed ABS plastic tower like suggested above. For about $20 more you can get a Stainless Steel tower from Keg Connection.


Plus, they allow you to customize as well, so you can add forward sealing faucets and homebrew disconnects. It adds to the cost, but definitely increases the value. This is the cheapest place I've found to land a SS tower with Perlick (forward sealing) faucets..only $180!

Reply With Quote
Old 07-10-2008, 08:51 PM   #5
Nov 2007
West Hartford, CT
Posts: 151
Liked 2 Times on 1 Posts

I was having the same debate with myself before I settled on just using picnic taps for now, and then when I have more cash I'll just buy the one that I really want with the proper taps.

I also remember reading something on here about making one yourself with a PVC tube and faucets. I can't remember who had that posting though. I'm sure you can find it in the DIY section.

"All right, brain, I don't like you, and you don't like me, so let's just do this and I'll get back to killing you with beer." - Homer Simpson

Reply With Quote
Old 07-10-2008, 08:56 PM   #6
May 2007
San Diego, CA
Posts: 4,276
Liked 19 Times on 17 Posts

I got mine from American Coffee and Urn. Brushed stainless 14" tower. Soooo pretty. It makes the rest of my kegerator look like a POS (which is pretty much is.


They do them custom and they're hot. And actually reasonably priced.

Reply With Quote
Old 07-10-2008, 08:58 PM   #7
Special Hops
Jun 2008
Posts: 1,444
Liked 28 Times on 25 Posts

I started with a picnic faucet on mine. One keg at a time. Then SWMBO bought me a Tower for my B-day and I upgraded to 2 kegs on tap.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting a Single Tower to a Dual Tower?!? nunzio42 Kegerators & Keezers 5 09-12-2013 05:43 AM
Making a dual beer tower? edwood Kegerators & Keezers 5 10-20-2008 01:46 AM
Used dual tower faucet for sale? Guigsy Equipment/Sanitation 12 02-01-2008 03:57 PM
dual tap tower source? wakkow Kegerators & Keezers 14 11-02-2007 10:16 PM
Question about a dual tap tower St. Jon's Wort Bottling/Kegging 2 08-28-2007 01:21 PM

Forum Jump