Kegerator connection type swap - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegerator connection type swap

Thread Tools
Old 06-29-2008, 11:00 PM   #1
Large Member
phooka's Avatar
Dec 2006
Virginia Beach, Virginia
Posts: 117

For reasons out of my control, I ran out of all homebrew and won't have anymore for 4 weeks at least. Having said that, I bought a 1/4 sanke keg of commercial brew and had to lop off my lines to fit my sanke tap on the lines. My co2 distribution thingy has an extra connection I tapped onto, but I'm wondering what kind of quick connect / disconnect fittings I can use for the beer side to swap the sanke with a ball lock easily in the event this happens again in the future?


Reply With Quote
Old 06-29-2008, 11:21 PM   #2
findthefish's Avatar
Feb 2008
Orange, CA
Posts: 473
Liked 6 Times on 5 Posts

Use a new tailpiece that you can swap back and forth with the corny QD. Something like this can convert it to this.

The Bruery Provisions - Homebrewing supplies and equipment.
BrewCommune - Orange County home brew club, yeast database, recipes, and forum.

On Deck: Belgian IPA
Primary: nothing
Secondary: Traditional Mead
Kegged: APA, Cream Ale, Belgian Ale, Sour Belgian, Barrel Aged RIS

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
keg connection docmoran Bottling/Kegging 40 03-08-2012 04:10 PM
Keg Connection Moose777 Bottling/Kegging 33 10-06-2009 04:04 PM
Keg Connection Joker Bottling/Kegging 14 06-11-2009 03:20 PM
Keg Connection TurboBrew General Beer Discussion 3 03-11-2009 07:43 PM
CO2 connection help foppa78 Bottling/Kegging 8 06-27-2007 07:20 PM

Forum Jump