force carbing question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > force carbing question

Thread Tools
Old 06-23-2008, 08:28 PM   #1
NateKerx's Avatar
Apr 2007
Brooklyn, NY
Posts: 169

My Sanyo conversion is almost done, the shelf removed, gasket replace, hole drilled, and counter and box mostly constructed. My cO2 tank just came in today, and Im thinking its about time to keg the two ales sitting in secondaries.

I plan on force carbonating the ales at the same time using the "sit and wait" method, but im unsure how to set my regulator. I have this regulator . Now im willing to carb both of my beers the same (an ESB and a dry irish stout), and am assuming if i hook up the tank to both beers at once set the pressure to around 9 psig at 42 F i'll be ok, but is there something else i need to consider given my setup?
Primary:Zach and Jack's African Amber, Lil Sparky's Nut Brown
On Tap: Fire In the Hole Red Ale, Sixpoint Righteous Ale
On Deck:Centennial Blonde, Amarillo Cream Ale

"Drinking is the joy of the Russes, we cannot live without this pleasure."

-Vladimir I, Grand Prince of Kiev

Reply With Quote
Old 06-23-2008, 08:45 PM   #2
Kwanesum Chinook Illahee
ShortSnoutBrewing's Avatar
Oct 2007
Portland, OR
Posts: 3,213
Liked 19 Times on 17 Posts

Don't forget patience....Set it and really FORGET it for about 2 weeks.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Another Force Carbing Question TheJadedDog Bottling/Kegging 28 02-02-2017 02:15 AM
Force Carbing / yeast question strez001 Soda Making 4 05-31-2009 07:55 PM
Question about force carbing and bleeding off GroosBrewz Bottling/Kegging 3 03-12-2009 05:03 PM
Force carbing question regarding PSI with gas disconnected blk94f150 Bottling/Kegging 3 07-22-2008 05:30 AM
Force Carbing Question EdWort Bottling/Kegging 2 11-21-2006 03:19 PM

Forum Jump