Have you used this conversion kit? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Have you used this conversion kit?

Thread Tools
Old 06-19-2008, 02:36 PM   #1
Jun 2008
Damascus, MD
Posts: 591
Liked 16 Times on 16 Posts

Does anyone have any experience with this kit? http://www.amazon.com/Double-Tower-R...885424&sr=8-31

Also I am wondering if a 10lb bottle will fit in the Sanyo 4912 along with 2 kegs.

I am thinking this will cost about $750 total to build. Does that sound about right?

Reply With Quote
Old 06-19-2008, 02:39 PM   #2
Soulive's Avatar
Mar 2007
The Middle of NJ
Posts: 4,278
Liked 25 Times on 25 Posts

With everything, it cost me about $550 to convert my Sanyo. I don't think 10lb tanks will fit in there. I haven't tried it, but just getting the 5lb tank in there is tight...

Green Lane Brewing

Primary = Evan!'s Special Bitter
On Deck = EdWort's Porter / American Amber

EdWort's Haus Pale Ale Count

Reply With Quote
Old 06-19-2008, 03:12 PM   #3
TheJadedDog's Avatar
Aug 2006
People's Republic of Cambridge
Posts: 3,316
Liked 16 Times on 13 Posts

Based on my set-up there is no way I could fit a 10lb tank in my 4912. I might be wrong but I think you can get cheaper towers from one of the homebrew sites (mine was like $200).
And now we go AG!

On Tap: Nadda
Primary: Nadda
Planning: Extra Special Bitter

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
LME+DME conversion Skins_Brew Extract Brewing 13 04-29-2009 11:36 PM
my 1-to-3 tap conversion williec30 Kegerators & Keezers 55 01-21-2009 11:59 PM
old keg conversion Jrosen Equipment/Sanitation 1 05-04-2008 03:40 PM
LME to DME conversion, doing it right? Mr. Awesome Recipes/Ingredients 2 02-17-2008 12:36 AM
LME to DME conversion zonabb Extract Brewing 2 07-21-2007 02:14 AM

Forum Jump