Fermentation done after four days; super-high original gravity - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Fermentation done after four days; super-high original gravity

Reply
 
Thread Tools
Old 06-05-2008, 07:48 PM   #1
doodeyfoodle
Recipes 
 
Jun 2008
Posts: 14


Hello all,

I'm in the middle of my first brew and (of course) am worried about the fermentation. I used an open-air pail (with a lid, just not air-tight) for the primary fermentation and there was definitely activity going on after the first day - the krausen was four to five inches high. The book I have (Joy of Homebrewing) recommends not leaving open-air fermentation for longer than a week, and another recommends transferring after only a few days.

So yesterday (day 4) I transferred to the secondary, a carboy sealed with a fermentation lock. There's about three or four inches from the top of the beer to the top of the neck. I haven't seen any bubbling in the airlock, and I'm worried (again, of course) that nothing is happening with the fermentation.

Here's the weird thing: my original gravity rating was 1.098, which seems ridiculously high. As of yesterday it was 1.009 - which would suggest that fermentation is done and that's why there's no bubbling in the airlock. I also now know that my thermometer is off, because when I checked the temperature while transferring to the secondary, the thermometer said under 10 degrees Celsius while the brew was at room temperature (approx. 20 degrees Celsius). I don't think this had a detrimental effect when I pitched the yeast though, because it obviously survived and started working, as evidenced by the huge krausen that developed.

So: it is possible that all fermentation has ceased after only three to four days? If not, what should I do to remedy the situation? If so, how long should the non-fermenting brew sit in the secondary? Do I simply have a fast-fermented, super-high alcohol brew?

Sorry for the length of the post, I just want to be as clear as possible.

Edit: I forgot to mention, I used two 1.9 kg batches of malt extract to try and get a heavy, full flavour. This might explain the high alcohol, but I didn't think it would be that high.

 
Reply With Quote
Old 06-05-2008, 07:54 PM   #2
Funkenjaeger
 
Funkenjaeger's Avatar
Recipes 
 
May 2007
Nashua, NH
Posts: 1,598
Liked 11 Times on 9 Posts


Are you sure your OG was actually 1.098? two 1.9kg cans (8.4lb) of liquid extract should, by my back-of-the-envelope calculations, yield about a 1.059 wort if you're making 5 gallons (35*8.4/5 = 59).

Regardless of the OG, if it's fermented to 1.009, it's almost certainly done, there's nothing to 'fix', just give it a few weeks to condition and then proceed. But again, given the possible mixup with the OG, I would make sure you've measured the FG properly also...

 
Reply With Quote
Old 06-05-2008, 08:08 PM   #3
Eves
Recipes 
 
Mar 2008
Posts: 382
Liked 4 Times on 4 Posts


I'd bet that the OG was taken with the wort not having been mixed as well as it could have been. Its the only thing that makes sense as to how you'd get a reading that high.

 
Reply With Quote
Old 06-05-2008, 08:26 PM   #4
doodeyfoodle
Recipes 
 
Jun 2008
Posts: 14

Yeah, I can only imagine that my messed-up thermometer caused me to take a reading at the wrong temperature. That, combined with some other unknown factor, must have thrown my reading, 'cause I couldn't believe 1.098. Thanks a lot for the replies guys, you're a great resource.

 
Reply With Quote
Old 06-05-2008, 10:19 PM   #5
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


its not yer thermometer...its the gravity reading. you literally have to stir for 10 solid minutes to mix a partial boil into the top off water. otherwise you'll get erratic gravity readings.
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Old 06-06-2008, 02:37 AM   #6
doodeyfoodle
Recipes 
 
Jun 2008
Posts: 14

Quote:
Originally Posted by malkore View Post
its not yer thermometer...its the gravity reading. you literally have to stir for 10 solid minutes to mix a partial boil into the top off water. otherwise you'll get erratic gravity readings.
Didn't know that. Thanks!

 
Reply With Quote
Old 06-07-2008, 11:00 PM   #7
Frilock
HBT_SUPPORTER.png
 
Frilock's Avatar
Recipes 
 
Dec 2007
Necedah, Wisconsin
Posts: 87
Liked 21 Times on 12 Posts


Quick off topic question, how do you calculate the OG like that?
__________________
Kungalush!

The word underpants is 20% funnier than the word underwear.

"As long as I have your loyalty I don't care if you sit around all day drinking beer in your underpants." -Zap Branigan.

 
Reply With Quote
Old 06-08-2008, 12:17 AM   #8
Ben25
Recipes 
 
May 2008
Chestnut Ridge, NY
Posts: 440

Beer Smith

 
Reply With Quote
Old 05-21-2012, 03:25 AM   #9
thornton33
Recipes 
 
May 2010
Laklenad, FL
Posts: 41

Regarding stirring up the wort: I know you're supposed to do it in order to aerate, but other than aeration and inaccurate OG reading, will the beer ferment properly?

 
Reply With Quote
Old 05-21-2012, 03:45 AM   #10
BeerChef17
HBT_SUPPORTER.png
Recipes 
 
Sep 2011
Washington, DC
Posts: 227
Liked 11 Times on 10 Posts


4 year old topic

Anyway you need to stir the wort when using top off water to obtain a proper OG reading-otherwise you won't have an even distribution of dissolved sugars and get a bad reading.

In regaurds to fermentation you stir to aerate your wort so your yeast have the oxygen they need to multiply so they can properly ferment your beer.
__________________
Primary:Empty
Secondary: Empty
Bottled: Nothing :(
Next up: Whatever I plan
Planning: Grindstone Amber Ale, Fruit Infused Cream of 3 Crops, Arrogant Bastard Clone

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Original Gravity - to high thomasfgeary Extract Brewing 6 08-06-2012 05:49 PM
Very high original gravity...again. DontTreadOnMike Beginners Beer Brewing Forum 11 12-29-2008 07:38 PM
Original Gravity Too High?` CO_crawler Beginners Beer Brewing Forum 5 10-25-2007 04:17 PM
High Original Gravity Reading 9999USMC Beginners Beer Brewing Forum 10 05-20-2007 02:28 PM
High Original Gravity!!! gmeyers Extract Brewing 13 03-15-2006 10:09 PM


Forum Jump