Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Second AG, missed final volume and off color
Reply
 
Thread Tools
Old 06-03-2008, 10:53 PM   #1
davebl
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2007
Location: Central Arkansas
Posts: 296
Liked 2 Times on 2 Posts
Likes Given: 1

Default Second AG, missed final volume and off color

I did my second all grain on Sunday, an American Wheat kit from AHS. I had a few issues towards the end with the volumes.

I know from my first AG, that if I start with 7 gallons preboil, my final volume will be 5.5 gallons. The AHS instructions said to not run off more than 6.25 gallons total before boiling, and end up with a 5.25 gallon final volume.

So, I followed their instructions (they have never let me down after the numerous PM and extract kits I have done) and ended up with 4.5ish gallons of wort. If I would have followed by normal 1.25qt/pound mash and 2qt/pound sparge my volumes would have been right.

I was also 4 gravity points higher on the OG than the recipe, which I assumed was the missing .75 gallons of volume.

I went ahead and pitched one packet of Safale 06 Wheat Ale yeast, fermentation was going within about 5 hours... then 2 days later nothing. The wort looks like the color of straw and its so hazy you can't see any trub or sludge settleing to the bottom. I have made about 15 beers and never seen wort so cloudy like this.

So... I was alright on missing the volume, but now the color has me nervous. I bought more ingredients for a Litehaus Wheat batch which I'll do tomorrow with my own calculations.

Any thoughts?

Dave


__________________
My RIMS Brewery Build Project

Planning:

Primary: Sam Smith Oatmeal Stout

Secondary: Centennial IPA (Dry Hopping)

Kegged: Oberon Clone, Kona Fire Rock APA, Northern English Brown, Centennial Blond
davebl is offline
 
Reply With Quote
Old 06-04-2008, 03:47 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,827
Liked 1342 Times on 878 Posts
Likes Given: 35

Default

4 points is nothing.. no stress. Wheats are cloudier than most also.


__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 06-04-2008, 03:54 AM   #3
davebl
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2007
Location: Central Arkansas
Posts: 296
Liked 2 Times on 2 Posts
Likes Given: 1

Default

This one is super cloudy. Almost looks like muddy water. Is that normal?
__________________
My RIMS Brewery Build Project

Planning:

Primary: Sam Smith Oatmeal Stout

Secondary: Centennial IPA (Dry Hopping)

Kegged: Oberon Clone, Kona Fire Rock APA, Northern English Brown, Centennial Blond
davebl is offline
 
Reply With Quote
Old 06-04-2008, 03:58 AM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,827
Liked 1342 Times on 878 Posts
Likes Given: 35

Default

Wheat is definitely more like that but it's more obvious in light beers since you can see all the sediment in suspension.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is offline
 
Reply With Quote
Old 06-04-2008, 10:37 PM   #5
malkore
Feedback Score: 0 reviews
 
malkore's Avatar
Recipes 
 
Join Date: Jun 2007
Location: Nebraska
Posts: 6,922
Liked 34 Times on 32 Posts
Likes Given: 9

Default

one thing to remember, evaporation from boiling isn't constant. humidity, temperature, wind, the vigor of teh boil (or lack of) all affect how much you lose.

i've never done an AG 'kit', but I suspect they only provide run-off instructions for novice brewers. I'd suggest you do it 'your way' from now on, because you know how 'your brewhouse' works better than they will.

technically you can top off to 5 gallons with water after the boil if it bugs you...but of course your gravity will drop.

I miss my volumes too. my current kolsch was only 4.5 gal into primary.


__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10
malkore is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Missed final volume - reboil after fermentation? anth All Grain & Partial Mash Brewing 17 11-26-2013 01:44 AM
Missed volume goal and OG Matt Up North All Grain & Partial Mash Brewing 11 08-22-2008 05:44 PM
Final volume? Yin_Yang All Grain & Partial Mash Brewing 5 08-19-2008 01:19 AM
Missed Pre-Boil Volume brew hoperator All Grain & Partial Mash Brewing 6 06-29-2008 05:01 PM
Missed finla volume - too much water. miatawnt2b All Grain & Partial Mash Brewing 5 11-11-2007 05:59 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS