Fly sparge vs. Batch? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Fly sparge vs. Batch?

Reply
 
Thread Tools
Old 05-26-2008, 06:45 PM   #1
dp69_2001
Recipes 
 
May 2008
Richfield, UT.
Posts: 369
Liked 4 Times on 4 Posts



I'm doing a partial in a couple weeks. I still need to build an MLT. What is the differences between batch and fly sparging? I can't seem to figure it out. Which is easier/cheaper? I bought some wheat under the impression that I could simply steep it prior to adding my hops and extract and now I'm confusing myself trying to figure this all out. I guess I can look on the bright side. I'll be one step closer to all grain.

 
Reply With Quote
Old 05-26-2008, 06:50 PM   #2
Desert_Sky
 
Desert_Sky's Avatar
Recipes 
 
Mar 2006
Sierra Vista, AZ
Posts: 4,077
Liked 53 Times on 41 Posts


Ive done about 60 batch sparges, but did my first fly sparge yesterday. I must say I really like fly sparging much more. It's just easier.

Efficiency was a bit better, and the grain bed only had to be set once. And I didnt have to lift 3-4 gallons of 180* sparge water up to the kettle.
__________________
Desert Sky Brewing Co.
Sierra Vista, AZ

 
Reply With Quote
Old 05-26-2008, 06:56 PM   #3
dp69_2001
Recipes 
 
May 2008
Richfield, UT.
Posts: 369
Liked 4 Times on 4 Posts


What's the difference? I'm very confused.

 
Reply With Quote
Old 05-26-2008, 06:56 PM   #4
jcarson83
 
jcarson83's Avatar
Recipes 
 
Jun 2006
Springfield, MO
Posts: 928
Liked 16 Times on 11 Posts


Batch sparge is easier IMHO for beginners.

http://www.howtobrew.com/section3/chapter17.html

The continuous sparge is the same as fly sparge. Do a search on homebrewtalk and you will find plenty of threads to help.

Basically fly sparge is when you rinse the grains continuosly by adding the same amount of water to the tun as your draining. Batch sparge is when you just dump the whole tun and then add more water, then drain that and repeat until your done.


 
Reply With Quote
Old 05-26-2008, 07:00 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,339
Liked 1765 Times on 1122 Posts


Read this: www.suebob.com/brew/allgrain.htm Man, I feel like I've been pimping it a lot lately but anything I'd type here is already there.
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-26-2008, 07:01 PM   #6
Yuri_Rage
Gritty.
HBT_MODERATOR.png
 
Yuri_Rage's Avatar
Recipes 
 
Jul 2006
Southwest
Posts: 14,291
Liked 813 Times on 514 Posts


This question comes up fairly often, and it's the subject of much debate. A forum search will likely yield more results than you care to read through. It boils down to this:

Batch sparging is faster, requires less equipment, and is generally considered easier. It MAY result in slightly lower efficiency, but the difference is rather slight.

Fly sparging requires a bit more equipment (potentially a pump, if you don't have a tiered setup), takes more time, requires more attention, and is generally considered somewhat difficult in comparison. Fly sparging is a more traditional brew method and can be done with great success, but it can definitely be a daunting task for a beginner.
__________________
Homebrewed Blog..........YouTube Channel .......... Shirts, posters, etc

 
Reply With Quote
Old 05-26-2008, 07:09 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,339
Liked 1765 Times on 1122 Posts


I would further suggest that batch sparging is probably more realistic in a partial mash situation.
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-26-2008, 07:12 PM   #8
ajf
Senior Member
HBT_LIFETIMESUPPORTER.png
 
ajf's Avatar
Recipes 
 
Oct 2005
Long Island
Posts: 4,646
Liked 105 Times on 99 Posts


Fly sparging requires suitable equipment. A cylindrical MLT with false bottom, and sparge arm is probably optimum, but many inventive forum members get good results with other equipment. It also requires more attention to detail, and usually takes longer, but in return, you may get slightly higher efficiency.
Batch sparging is faster, slightly easier, and a lot cheaper to build suitable equipment. The only real disadvantage to batch sparging that I can see is that you require more space in the MLT to hold the sparge water. I usually fly sparge because my MLT is too small to batch sparge the brews I like to make, but if I had a bigger MLT, I would probably switch to batch.

-a.

 
Reply With Quote
Old 05-26-2008, 07:16 PM   #9
dp69_2001
Recipes 
 
May 2008
Richfield, UT.
Posts: 369
Liked 4 Times on 4 Posts


Okay So if I were to batch sparge the 5 lbs of wheat. And build a laughter tun out of a 5 gallon cooler. I would just fill it wait for 60 minutes recirculate for a minute and then drain into my brewpot and continue the batch as normal?

 
Reply With Quote
Old 05-26-2008, 07:42 PM   #10
ajf
Senior Member
HBT_LIFETIMESUPPORTER.png
 
ajf's Avatar
Recipes 
 
Oct 2005
Long Island
Posts: 4,646
Liked 105 Times on 99 Posts


There is a bit more to it than that, but only a little bit.
Before you start sparging, you need to mash. To do this, you need to mix the milled grain with a small amount of water (1 - 2 qts water per lb grain). After mixing, you want the temperature to be about 154. There are lots of on-line calculators (google mash temp calculator, or search this forum for links). For the first time, I would recommend using 1 qt water per lb, and have a supply of hot (freshly boiled) and cold water to adjust the temp if required. This will thin out the mash a bit. When you have the temperature right, you leave it for 60 minutes, and then sparge.
The sparge consists of adding about 2 qts 175 - 180F water per lb grain, stirring well, recirculating a couple qts wort (until the wort does not contain any grain particles), and then draining the rest of the wort into the brewpot and continue as normal.
If you are thinking of goings AG in the future, you may want to consider a 10g cooler. I fly sparge because I have a 5g cooler.

-a.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fly Sparge VS Batch Sparge: Facts ph0ngwh0ng All Grain & Partial Mash Brewing 52 10-27-2011 06:37 PM
Batch Sparge or No Sparge? cheezerman Beginners Beer Brewing Forum 7 09-11-2009 03:37 AM
first batch sparge. Conodor Beginners Beer Brewing Forum 2 05-06-2009 04:43 PM
batch sparge or fly sparge blackwaterbrewer All Grain & Partial Mash Brewing 10 01-17-2009 06:12 PM
Why should I batch sparge? Brewmeistermj All Grain & Partial Mash Brewing 17 01-11-2009 10:55 PM


Forum Jump