Air Bubbles in Beer Line? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Air Bubbles in Beer Line?

Reply
 
Thread Tools
Old 05-14-2008, 01:33 PM   #1
southsidebrewer
HBT_LIFETIMESUPPORTER.png
 
southsidebrewer's Avatar
Recipes 
 
Dec 2007
Indianapolis
Posts: 47
Liked 2 Times on 2 Posts



I'm kegging for the first time, and am having the normal "too much head, not enough carbonation in solution" battles which everyone seems to go through the first couple times. The numerous threads on this topic have been very helpful.

One question i did have is: should I expect to have air/gas bubbles in my beer out lines? when i first tapped the kegs, i did not see this but now it seems to be getting worse. i have both little CO2 bubbles in the lines as well as significant air pockets (void volume) in the lines.

I'm guessing I have a leak somewhere? Any troubleshooting tips would be greatly appreciated!

-ssb

 
Reply With Quote
Old 05-14-2008, 02:06 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,245
Liked 1695 Times on 1089 Posts


It's not a leak and it's not air. It's just CO2 coming out of solution. I presume that the lines coil above the kegs and that air is generally warmer. It doesn't take much CO2 to fill that narrow tubing.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-14-2008, 02:46 PM   #3
southsidebrewer
HBT_LIFETIMESUPPORTER.png
 
southsidebrewer's Avatar
Recipes 
 
Dec 2007
Indianapolis
Posts: 47
Liked 2 Times on 2 Posts


Thanks Bobby. So it sounds normal.

I've got the kegs in a refigerator where I have to constantly open/close the door to get to the beer. From what you said, I'm guessing the lines are warming up. When I go to a "tap on the outside" setup, I presume this should be less of a problem?

 
Reply With Quote
Old 05-14-2008, 03:12 PM   #4
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 9,043
Liked 173 Times on 158 Posts


What pressure are you running? You don't want bubbles (co2) in your beer lines, that's a sign of low pressure and the co2 is breaking out. This will cause foaming.

 
Reply With Quote
Old 05-14-2008, 03:39 PM   #5
southsidebrewer
HBT_LIFETIMESUPPORTER.png
 
southsidebrewer's Avatar
Recipes 
 
Dec 2007
Indianapolis
Posts: 47
Liked 2 Times on 2 Posts


I had the keg at 22-25 psi for a couple weeks (it's Apfelwein...i like it highly carb'd), then backed it down to 5 psi to serve (i'm using picnic taps). the Apfelwein does foam quite a bit when it comes out. is 5 psi too low? i tried 10-12 psi but it comes gusing out. i'm using about 5-6 feet of 3/16" id tubing. i thought this would drop the pressure from 10-12 psi adequately (2.7 psi/foot), but I haven't had any success so I moved to a lower pressure (where i still get some noticable foam).

 
Reply With Quote
Old 05-14-2008, 03:55 PM   #6
RoaringBrewer
 
RoaringBrewer's Avatar
Recipes 
 
Oct 2006
Lancaster County, PA
Posts: 1,787
Liked 3 Times on 3 Posts


FWIW -

I have my system "balanced" (but not per the calculations) based on trial and error. I have 10' or so of line (3/16" ID) on each tap. I carbonate and serve at the same pressure and never turn it down (e.g. true "set and forget") and never get foamy pours on anything I've poured between 10psi (my bitters) and 16psi (my wheats). I've never carbed up to 20+ psi before, but I think my length of line could handle it with no need to drop the pressure.

As for the CO2 bubbles in the line above the keg, I think thats normal due to being coiled (probably has so effect on pressure) or above the keg where the beer is probably a few degrees warmer. I think it would be only natural that some CO2 would come out of solution of the keg is at 40F, but the tubing near my tower is at 50F. Even so, I never even get foamy first pours and I've never had any problems with CO2 bubbles in my line...
__________________
Roaring Bull Brewing Co.
Est. 2006
http://www.cafepress.com/roaringbull

Currently Consuming (HB): Apfelwein on Tap Troegs Hopback on Tap; Craft Bottles
Fermenting/Conditioning: Up Next: Hop Trio American Wheat, Lake Walk Pale Ale
In Planning Stage: Farmhouse Saison and Something Oaked.

 
Reply With Quote
Old 05-14-2008, 04:04 PM   #7
Blender
 
Blender's Avatar
Recipes 
 
Jan 2006
Santa Cruz, CA.
Posts: 3,106
Liked 8 Times on 5 Posts


Quote:
Originally Posted by southsidebrewer View Post
Thanks Bobby. So it sounds normal.

I've got the kegs in a refigerator where I have to constantly open/close the door to get to the beer. From what you said, I'm guessing the lines are warming up. When I go to a "tap on the outside" setup, I presume this should be less of a problem?
I don't know if it is normal. I have picnic taps and open the door all the time yet there isn't CO2 in my lines. I don't coil the line on top of keg though as I hang the tap on the side of the keg handle. I wouldn't think opening the door to pour a beer is going to warm the lines all that much.
__________________
Gary

 
Reply With Quote
Old 05-14-2008, 04:43 PM   #8
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 9,043
Liked 173 Times on 158 Posts


Quote:
Originally Posted by southsidebrewer View Post
I had the keg at 22-25 psi for a couple weeks (it's Apfelwein...i like it highly carb'd), then backed it down to 5 psi to serve (i'm using picnic taps). the Apfelwein does foam quite a bit when it comes out. is 5 psi too low? i tried 10-12 psi but it comes gusing out. i'm using about 5-6 feet of 3/16" id tubing. i thought this would drop the pressure from 10-12 psi adequately (2.7 psi/foot), but I haven't had any success so I moved to a lower pressure (where i still get some noticable foam).
I served my apfelwein at 10 to 12 psi with no problems. Are your serving lines cooled?

 
Reply With Quote
Old 05-14-2008, 05:07 PM   #9
southsidebrewer
HBT_LIFETIMESUPPORTER.png
 
southsidebrewer's Avatar
Recipes 
 
Dec 2007
Indianapolis
Posts: 47
Liked 2 Times on 2 Posts


the lines are cooled to the extent they are inside the fridge with the keg...no additional cooling. i also try to hang the tap on the top of the keg...some of the line sits on top, but the majority is hanging alongside the keg.

 
Reply With Quote
Old 05-14-2008, 05:17 PM   #10
wildwest450
Registered User
Recipes 
 
Dec 2007
Posts: 9,043
Liked 173 Times on 158 Posts


Quote:
Originally Posted by southsidebrewer View Post
the lines are cooled to the extent they are inside the fridge with the keg...no additional cooling. i also try to hang the tap on the top of the keg...some of the line sits on top, but the majority is hanging alongside the keg.
That should be fine, I personally wouldn't run anything at 5psi, that is most likely the cause of your c02 breakout, try turning it up to at least 10psi and see if the bubbles disappear. There's a lot of good info here http://www.micromatic.com/draft-keg-...-cid-2455.html that should help solve your problems.


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New to Kegging/Bubbles in beer line problem Rethin Bottling/Kegging 4 08-17-2013 03:27 PM
Bubbles in my beer line?!......!!*%&#@!! PetVet Bottling/Kegging 19 09-05-2009 04:06 PM
Using 1/4" braided line for beer line - ok? bmckee56 Bottling/Kegging 12 02-22-2009 07:40 AM
bubbles in my beer line Surfman Bottling/Kegging 7 09-25-2008 11:01 PM
Bubbles/air in siphon line wbutler General Techniques 4 09-19-2008 08:57 PM


Forum Jump