Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Force Carb Question
Reply
 
Thread Tools
Old 04-29-2008, 01:40 PM   #1
Brewlicious
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2007
Posts: 47
Default Force Carb Question

This is my first force carbonation so I would like to run the situation past the pros on the board. I have a five gallon corny keg chilled to 40 degrees with the CO2 set to 35psi and hooked up to the OUT. It was hooked up today (Tuesday) at 9:00a.m. Tomorrow at about 12:00 pm I will dial it down to 18psi and leave it until Thursday evening at about 7:00 pm. I’m shooting for around 3.0 vols of CO2 per gallon. Have I done this right? And is this enough time for it to be ready this Thursday at 7:00 pm?

Thanks in advance



Brewlicious is offline
 
Reply With Quote
Old 04-29-2008, 01:46 PM   #2
BierMuncher
...My Junk is Ugly...
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
BierMuncher's Avatar
Recipes 
 
Join Date: Jan 2007
Location: St. Louis, MO
Posts: 12,337
Liked 705 Times on 400 Posts
Likes Given: 260

Default

Sounds about right to me.
I set mine at 35 PSI for 36 hours. That usually gets me fully carb'd.
Then I drop the pressure to around 12 and leave it there for serving.

You nay want to test yours along the way (at 18 PSI) so as not to overcarb.

Just make sure when you're testing:
Kill the gas.
Release the excess gas out of the keg
Dial up the PSI to around 8-9 and pour.


BierMuncher is offline
 
Reply With Quote
Old 04-29-2008, 01:54 PM   #3
Brewlicious
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2007
Posts: 47
Default

Many thanks
Brewlicious is offline
 
Reply With Quote
Old 04-29-2008, 02:00 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,748
Liked 1299 Times on 853 Posts
Likes Given: 35

Default

Just to reiterate for impact, shut the gas off or disconnect, dial the pressure down, then fully purge the keg. If you don't do this, you might think you've overcarbed by the way the beer will shoot out of the faucet (I say beer, but I mean foam).
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is online now
 
Reply With Quote
Old 04-29-2008, 02:08 PM   #5
ohiobrewtus
Feedback Score: 0 reviews
 
ohiobrewtus's Avatar
Recipes 
 
Join Date: Nov 2006
Location: Ohio
Posts: 7,814
Liked 43 Times on 39 Posts
Likes Given: 4

Default

Quote:
Originally Posted by BierMuncher
Sounds about right to me.
I set mine at 35 PSI for 36 hours. That usually gets me fully carb'd.
Then I drop the pressure to around 12 and leave it there for serving.

You nay want to test yours along the way (at 18 PSI) so as not to overcarb.

Just make sure when you're testing:
Kill the gas.
Release the excess gas out of the keg
Dial up the PSI to around 8-9 and pour.
I do the same. BM taught me well. Follow this and you'll be fine.
__________________
Quote:
Originally Posted by the_bird
Well, if you *love* it.... again, note that my A.S.S. has five pounds.
ohiobrewtus is offline
 
Reply With Quote
Old 04-29-2008, 02:35 PM   #6
Blender
Feedback Score: 0 reviews
 
Blender's Avatar
Recipes 
 
Join Date: Jan 2006
Location: Santa Cruz, CA.
Posts: 3,116
Liked 6 Times on 4 Posts

Default

Quote:
Originally Posted by Brewlicious
This is my first force carbonation so I would like to run the situation past the pros on the board. I have a five gallon corny keg chilled to 40 degrees with the CO2 set to 35psi and hooked up to the OUT. It was hooked up today (Tuesday) at 9:00a.m. Tomorrow at about 12:00 pm I will dial it down to 18psi and leave it until Thursday evening at about 7:00 pm. I’m shooting for around 3.0 vols of CO2 per gallon. Have I done this right? And is this enough time for it to be ready this Thursday at 7:00 pm?

Thanks in advance

I have not done this before but why did you hook it up to the Out side? It might create a fair bit of foam.
__________________
Gary
Blender is offline
 
Reply With Quote
Old 04-29-2008, 02:44 PM   #7
BierMuncher
...My Junk is Ugly...
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
BierMuncher's Avatar
Recipes 
 
Join Date: Jan 2007
Location: St. Louis, MO
Posts: 12,337
Liked 705 Times on 400 Posts
Likes Given: 260

Default

Quote:
Originally Posted by Blender
I have not done this before but why did you hook it up to the Out side? It might create a fair bit of foam.
Yeah...I kind of overlooked this detail.

Some feel that hooking it up to the liquid line helps speed the process because you're "bubbling" in the CO2 from the bottom.

Reality is that unless you have an airstone hooked up, the bubbles are much too large to get absorbed before they rise to the top of the keg.

I'd forego the practice of hooking up to your out post.
BierMuncher is offline
 
Reply With Quote
Old 04-29-2008, 02:49 PM   #8
blacklab
Registered User
Feedback Score: 0 reviews
 
blacklab's Avatar
Recipes 
 
Join Date: Nov 2007
Location: Portland, ME
Posts: 2,395
Liked 39 Times on 21 Posts
Likes Given: 4

Default

In this case the guy is hooked up to the OUT side.

Question about the other method-the IN side. Is it true that you should disconnect your tap when force carbing, as it cannot handle the 35 psi and may burst?
blacklab is offline
 
Reply With Quote
Old 04-29-2008, 02:58 PM   #9
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 4 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,748
Liked 1299 Times on 853 Posts
Likes Given: 35

Default

By "tap" do you mean a picnic/cobra faucet? In that case, it may be true. If you mean a metal faucet, I'm sure it can handle the pressure.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is online now
 
Reply With Quote
Old 04-29-2008, 06:22 PM   #10
Brewlicious
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2007
Posts: 47
Default

Thanks Dudes! I can't wait to try my first keg of beer!


Brewlicious is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Force carb noob question . . . Halldawg Bottling/Kegging 4 10-06-2009 12:32 AM
Force Carb Question Kronin Bottling/Kegging 2 10-04-2009 11:56 PM
Force Carb question fuzzybee Bottling/Kegging 8 08-24-2009 02:18 AM
question about force carb. miatawnt2b Bottling/Kegging 7 09-20-2007 11:38 PM
Force Carb Question(s) jezter6 Bottling/Kegging 8 08-15-2007 04:25 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS