Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Water for sparging.
Reply
 
Thread Tools
Old 04-21-2008, 12:28 AM   #1
Omegaman13
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Posts: 13
Default Water for sparging.

I just started AG, and was wondering if the calculations for fly/continuous sparging are different then with batching? My book that I have been going off of(How to brew) gives me the inclination that the amount of water used is different, but can't really decipher it since the book doesn't really have a section based solely on sparging(kind of jumps around).


Omegaman13 is offline
 
Reply With Quote
Old 04-21-2008, 01:57 AM   #2
ajf
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
ajf's Avatar
Recipes 
 
Join Date: Oct 2005
Location: Long Island
Posts: 4,643
Liked 103 Times on 97 Posts
Likes Given: 39

Default

I can only speak for my own system. It may be very different than yours.

When batch sparging (which I do very occasionally), I heat 5g sparge water for a 5g batch. This is more than I need, but I use the excess for clean up.

When fly sparging, I heat 9g sparge water. Unless I have about 2g in the HLT, there isn't enough bead to spin the sparge arm. I also stop the sparge when the gravity reaches 1.010, at which time, there's probably another 2g in the lauter tun.

Whatever you do, make sure you have enough water. If you have too much, you can use the excess for clean up. If you don't have enough, you're in trouble.

After a brew or two, you can fine tune things to suite your equipment.

-a.


ajf is offline
 
Reply With Quote
Old 04-21-2008, 03:06 AM   #3
WeHeavy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: NW Ohio
Posts: 53
Liked 2 Times on 1 Posts

Default

I always heat up more sparge water than is needed, just stop sparging when you hit 1.010.
WeHeavy is offline
 
Reply With Quote
Old 04-21-2008, 04:30 AM   #4
scinerd3000
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Location: Milton, De
Posts: 2,155
Liked 11 Times on 11 Posts
Likes Given: 29

Default

Quote:
Originally Posted by WeHeavy
I always heat up more sparge water than is needed, just stop sparging when you hit 1.010.
how do you know to stop at 1.010? so theoretically if i was brewing a trippel or some other high grav beer i would stop at a higher gravity?
__________________
On Hiatus: Brewing at work....
scinerd3000 is offline
 
Reply With Quote
Old 04-21-2008, 04:24 PM   #5
WeHeavy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Location: NW Ohio
Posts: 53
Liked 2 Times on 1 Posts

Default

You can either use the ph method (ph 6) to know when to stop or take a gravity reading of your cooled runoff.

Depending on what I'm making I start checking my gravity around 4-1/2 gallons collected.

Since I have a boil off of around 1.25 g/hr I would ajust my boiling time up for a high gravity beer, and for lower gravity beers I boil 60 mins and add water at the end to get the deisred amount.
WeHeavy is offline
 
Reply With Quote
Old 04-21-2008, 09:18 PM   #6
drayman86
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2007
Location: Lansing, Michigan
Posts: 307
Liked 9 Times on 5 Posts

Default

Quote:
Originally Posted by WeHeavy
I always heat up more sparge water than is needed, just stop sparging when you hit 1.010.

Haven't found the need for this extra step. We simply collect the amount of wort that the recipe software calls for.
drayman86 is offline
 
Reply With Quote
Old 04-21-2008, 09:45 PM   #7
BierMuncher
...My Junk is Ugly...
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
BierMuncher's Avatar
Recipes 
 
Join Date: Jan 2007
Location: St. Louis, MO
Posts: 12,337
Liked 706 Times on 400 Posts
Likes Given: 260

Default

Try to keep it simple.

Plan enough sparge water to get to your preboil volume.

When your pot fills to your post boil mark, pause the sparge, take a sample from the kettle, cool and take a reading. How close you are to your target OG at this stage will give you an indication of how much more aggressive you need to be in getting extra sugars your of the mash tun.


BierMuncher is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
fly sparging/water temp busmanray All Grain & Partial Mash Brewing 5 05-14-2008 08:45 PM
Fly Sparging Vs. Batch Sparging New2HomeBrew All Grain & Partial Mash Brewing 28 08-08-2007 05:25 PM
measuring water for batch sparging cha ngo General Techniques 9 12-29-2006 01:33 AM
Mash/Sparging & Water Levels Willie3 All Grain & Partial Mash Brewing 2 08-19-2006 10:01 PM
does amount of water used for sparging grains matter for extract brewing? hoppedup Extract Brewing 5 07-31-2006 06:32 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS