where to drill the hole - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > where to drill the hole

Reply
 
Thread Tools
Old 04-16-2008, 11:53 PM   #1
bru-er
Recipes 
 
Mar 2008
ABQ, NM
Posts: 99


I have been kegging for a few years now and using a picnic tap. I finally broke down an ordered a tap handle assembly. The big question is where do I drill the 1 inch hole? I do not want to hit anything critical when drilling. I have a standard side-by-side fridge and was debating on just going through the door and using a service loop of line so I can still get in and out. Any advice?

 
Reply With Quote
Old 04-17-2008, 12:27 AM   #2
EdWort
HBT_LIFETIMESUPPORTER.png
 
EdWort's Avatar
Recipes 
 
Jul 2006
Bee Cave, Texas
Posts: 11,912
Liked 342 Times on 169 Posts


Through the door should be fine on most fridges. Do not drill through the side or you will risk turning your fridge into a large door stop.

 
Reply With Quote
Old 04-17-2008, 12:47 AM   #3
bru-er
Recipes 
 
Mar 2008
ABQ, NM
Posts: 99

That is what I thought. Thanks for the input.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
who could drill my kettle hole doubleb Equipment/Sanitation 35 07-20-2010 12:18 PM
What is the best way to drill a hole in a tower? Splangy Kegerators & Keezers 6 04-19-2009 08:22 PM
Did you drill a hole in the bottom of your keg? TerapinChef Equipment/Sanitation 16 02-18-2009 01:53 AM
Hole Saw Set...OK for keggle drill? broadbill Equipment/Sanitation 32 11-22-2008 01:38 AM
How high to drill the 7/8th hole? Ol' Grog Equipment/Sanitation 5 03-30-2007 06:00 PM


Forum Jump