Phase 2 brewery construction photo - Page 4 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Phase 2 brewery construction photo

Reply
 
Thread Tools
Old 07-21-2008, 03:30 AM   #31
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Dec 2006
Turner, Oregon, Oregon most of the time now
Posts: 2,305
Liked 53 Times on 47 Posts


Have enjoyed 4 summers in chandler rebuilding and building Intel facilities, not a lot of fun working outdoors when it is 118 degrees, even less when you have to put on a saranex chemical suit above 100 degrees F. Looks I will be back to springerville in october for a week or two to get a couple people started on a steam turbine job then I hope to head back to oregon again. Here are a few shots of the system taken after the wet testing today. http://picasaweb.google.com/kevin.la...ProgressPhotoS Still have to make false bottom for mash tun, screened pickup tube for boil kettle, vapor hood and exhaust system for boil kettle, and put together the water chillers, pump and 50L keg for the glycol cooling system.


 
Reply With Quote
Old 07-23-2008, 04:24 PM   #32
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Dec 2006
Turner, Oregon, Oregon most of the time now
Posts: 2,305
Liked 53 Times on 47 Posts


Here are a couple shots of the screw conveyor system, internal screw is 1/4" copper over 1-1/4" copper, outer is 2" Od stainless, drive is 1/8 Hp TEFC motor with 1" drive and 4" driven pulleys. http://picasaweb.google.com/kevin.la...41875307268178

 
Reply With Quote
Old 07-23-2008, 07:39 PM   #34
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
 
beerthirty's Avatar
Recipes 
 
May 2008
Podunk, VA. Not far from the NC line.
Posts: 2,589
Liked 33 Times on 14 Posts


that looks nice. the only thing I would change is to move the rust to the outside of the mash tun.
__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.

 
Reply With Quote
Old 07-23-2008, 10:04 PM   #35
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Dec 2006
Turner, Oregon, Oregon most of the time now
Posts: 2,305
Liked 53 Times on 47 Posts


That is yeast residue left on inside of keg when it was opened, it will come off during caustic cleaning after internal parts are finished. Outside gets 1" of insulation and 20Gauge SS skin with latches to faciltate removal of jacket for cleaning.

 
Reply With Quote
Old 07-24-2008, 05:34 PM   #36
beerthirty
big beers turn my gears
HBT_LIFETIMESUPPORTER.png
 
beerthirty's Avatar
Recipes 
 
May 2008
Podunk, VA. Not far from the NC line.
Posts: 2,589
Liked 33 Times on 14 Posts


as I found out this morning when I cut open 2 sankes that had wheat in them.
__________________
Quote:
Originally Posted by the_bird View Post
"I've got a fever... and the only prescription is, MORE CARBOYS!"
primary- Tangerine Dream, SWMBO slayer,
serving- amber ale hop experiment #6, Roggenbier, apfelwine
planning- Cru?
conditioning- 9/9/09 barleywine
Drink water?... Never, fish fornicate in it.--- W.C. Fields
Most problems can be solved with the proper application of force.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Phase 2 brewery build progress shots kladue Brew Stands 207 05-24-2011 04:37 AM
Brewery Construction cyberbackpacker Brew Stands 45 08-24-2009 05:06 PM
New brewery construction Rick500 Great Lakes Homebrew Forum 2 05-14-2009 04:37 AM
Phase 2 brewery boiler testing kladue Brew Stands 0 10-18-2008 02:47 AM


Forum Jump