Paint or Stainless strips for your Brutus - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Paint or Stainless strips for your Brutus

Reply
 
Thread Tools
Old 03-27-2008, 05:14 PM   #1
pieper
Recipes 
 
Jan 2008
Posts: 28


Hi Everyone --

I just build my own Brutus (Brutus Buick) and as I didnt go with a stainless stand, I think I may need to add some stainless steel strips on the top so I dont scratch the paint off of it with my kettles.

I plan to pain the stand with header paint (high temp paint) so it wont be effected by the heat but was wondering what you guys have done to combat sratching the paint off the top of your stands.

Thanks in advance,

cmp

 
Reply With Quote
Old 03-27-2008, 05:17 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,245
Liked 1695 Times on 1089 Posts


They also have clear coat for that high temp stuff so I'd just keep building up a nice 3 color, 3 clear. It also helps to have stops on the top to keep the kettles from sliding around.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 03-28-2008, 03:29 PM   #3
pieper
Recipes 
 
Jan 2008
Posts: 28

thanks for the reply --- has anyone have experience with this paint?

 
Reply With Quote
Old 03-28-2008, 04:05 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,245
Liked 1695 Times on 1089 Posts


I used the lower temp rated "engine paint" but haven't test fired the stand yet.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 03-28-2008, 05:57 PM   #5
shafferpilot
HBT_LIFETIMESUPPORTER.png
 
shafferpilot's Avatar
Recipes 
 
Sep 2007
Cincinnati OH
Posts: 1,579
Liked 20 Times on 19 Posts


Here's the deal with high temp paint: header paint is not recommended for this application. It tends to stay chaulky and will rub off on your clothes. Engine Enamel is a wonderfully strong finish. However, you MUST cook the paint in order for it to cure. What you do is wash the metal with laquer thinner to remove ALL welding splatter and oil. Then spray the stuff on and let it dry overnight. Then use a torpedo heater, oven(not the one you cook food in), space heater, etc. to heat the thing up and cook the paint. While it's hot it will turn into a gel and bond with the metal. The time required for cooking relates to how hot you can get it. It takes about an hour with a torpedo heater. When it stops smoking it's done. After it cools, the gel hardens into a very strong finish. Now it can take the heat and abuse. If you don't properly cook this stuff, or get it too hot before it's been cooked, it will burn and flake off. If you don't have the patience to cook the stuff, you might as well get some regular old spray paint, because that will work better than uncured engine paint
__________________
A great man knows that he knows NOTHING

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stainless wall thickness for Brutus 10? BeerElf Brew Stands 34 08-02-2011 02:48 PM
Stainless Brutus stand - Not Mine (Orange County) Marshal6 For Sale 17 10-15-2009 06:46 PM
pH strips and temperature Piotr All Grain & Partial Mash Brewing 7 01-05-2009 08:07 PM
PH Test strips Grinder12000 Equipment/Sanitation 12 11-14-2008 01:06 AM
pH Strips quickerNu Equipment/Sanitation 2 02-24-2008 05:04 PM


Forum Jump