A couple of newbie questions - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > A couple of newbie questions

Reply
 
Thread Tools
Old 03-26-2008, 12:36 PM   #1
logoll
Recipes 
 
Mar 2008
Posts: 2


Been lurking in these forums for a while now until I got my brew kit yesterday. I bought the Coopers Kit and brewing a lager.

Just a couple of questions.

1. I want to see what is going on in the fermenter but unfortunately only have the plastick bucket variety. Will I "damage" the brew in anyway if I pop off the lid every now and then to have a look. Will definately go for a glass carboy next time round.

2. This being my first batch I really want to keep a close watch and see what happens, for example how quickly does the SG drop etc. Is there any reason why I should not take a hydrometer reading once a day or so. I know this is excessive

3. I am certain there is a major leak somewhere on the bucket as I am not getting any bubbles through the airlock. Fermenting is definately taking place as the krausen has started to form on the top and after 1 day it is about 5cm thick. Will this leak cause my brew to spoil ?

4. I have seen some videos on youtube about some really "violent" fermentation. Is this the correct fermentation to expect as mine is much slower and if it wasn't for the krausen hardly noticable?

5. Any advise on how to keep a carboy cool. The official coopers "manual" says the temp should be between 69 an 80. Mine is running at about 75, but from what I have read everywhere this should be lower.

Lastly thanks for a great forum.



 
Reply With Quote
Old 03-26-2008, 12:43 PM   #2
EvilTOJ
 
EvilTOJ's Avatar
Recipes 
 
Dec 2005
Portland, OR, Oregon
Posts: 6,390
Liked 49 Times on 34 Posts


1. Damage it, well yes and no. Every time you open the lid you're exposing your wort to microbes. Sure it's a very small chance you'll contaminate it, but why chance it? Besides all you'll see is a big thick greasy set o bubbles on top. The REAL action is underneath.

2. Same reason as above.

3. No, outgassing keeps outside air from getting into the wort. Even when it's done fermenting, microbes don't crawl, they float in the air and fall.

4. Krausen levels vary on the amount of fermentables, temp, and yeast, so sometimes you'll get a violent blowoff, sometimes not.

5. Putting the bucket in a tub of cool water and adding jugs full of frozen water to it will help keep it cool. ALso a Tshirt over the top will help by doing evaporative cooling.

And welcome to the forum!


__________________
There is a very fine line between "hobby" and "mental illness."

 
Reply With Quote
Old 03-26-2008, 12:46 PM   #3
Brett3rThanU
Recipes 
 
Jan 2008
Houston, TX
Posts: 574
Liked 5 Times on 5 Posts


1. I want to see what is going on in the fermenter but unfortunately only have the plastick bucket variety. Will I "damage" the brew in anyway if I pop off the lid every now and then to have a look. Will definately go for a glass carboy next time round.
Nope, as long as you're careful and don't drop/drip anything in there.

2. This being my first batch I really want to keep a close watch and see what happens, for example how quickly does the SG drop etc. Is there any reason why I should not take a hydrometer reading once a day or so. I know this is excessive
The more you open the lid, the more you risk contamination. I would only take a reading when you're preparing to rack or bottle

3. I am certain there is a major leak somewhere on the bucket as I am not getting any bubbles through the airlock. Fermenting is definately taking place as the krausen has started to form on the top and after 1 day it is about 5cm thick. Will this leak cause my brew to spoil ?
You'll probably be okay, but are you sure there is a leak? If you push down on the lid do bubbles appear in the airlock?

4. I have seen some videos on youtube about some really "violent" fermentation. Is this the correct fermentation to expect as mine is much slower and if it wasn't for the krausen hardly noticable?
Airlock activity doesn't really determine fermentation. My last batch only appeared to have activity for a couple of days, but sure enough after 1 week the gravity had completed dropped to the target FG. It also depends on your yeast, recipe, etc.

5. Any advise on how to keep a carboy cool. The official coopers "manual" says the temp should be between 69 an 80. Mine is running at about 75, but from what I have read everywhere this should be lower.
Before I got my freezer, I put the carboy in a cooler filled with several inches of water and added ice as needed to keep the carboy at 66F. Worked like a charm.

 
Reply With Quote
Old 03-26-2008, 12:49 PM   #4
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,891
Liked 3163 Times on 1871 Posts


Welcome!

Go here...all the info you want to know about your questions are pretty much answered...http://www.homebrewtalk.com/showthread.php?t=54362

This tread talks about leaks (or lack of) http://www.homebrewtalk.com/showthread.php?t=60000

Especially this post

http://www.homebrewtalk.com/showthre...860#post609860

You don't need to obsessively stare at your beer....or worry that fermentation is or isn't occuring...This post is great advice...

Quote:
Originally Posted by Bobby_M
You do know that as a new brewer, it's your job to insanely worry that you have the only environment on earth where a billion yeast cells can't figure out how to find all that sugar that they crave. ;-)

you shouldn't open the bucket too much...after a week in primary you can open it up the next 3 times to take hydrometer readers to see if it's done fermenting...get a 6.5 gallon carboy if you want to watch it....
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 03-26-2008, 01:31 PM   #5
logoll
Recipes 
 
Mar 2008
Posts: 2

Thanks to all for your replies, I wil be going through that epic post you pointed to Revvy.

 
Reply With Quote
Old 03-26-2008, 01:35 PM   #6
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,891
Liked 3163 Times on 1871 Posts


Quote:
Originally Posted by logoll
Thanks to all for your replies, I wil be going through that epic post you pointed to Revvy.

Glad I could help!

In the future before you start a thread, use the search feature...you'll prolly find that your guestions have been already answered dozens of times(often in the same day)...Of course after you read the links I gave you, you probably won't have anymore "n00b" worry type ones, because you'll become the king or "RDWHAHB!"

Welcome to our hobb....erm I mean obsession!

And welcome to HBT!


__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
A couple of newbie questions here nasmeyer Beginners Beer Brewing Forum 6 12-15-2008 12:58 AM
Couple of newbie questions Taetoe Beginners Beer Brewing Forum 5 08-12-2008 10:13 PM
Couple of newbie questions mikechambers Beginners Beer Brewing Forum 7 07-08-2008 12:21 AM
Couple newbie questions.... freebird Beginners Beer Brewing Forum 2 06-07-2006 12:31 PM
A couple more newbie questions indian09 Beginners Beer Brewing Forum 8 01-04-2006 01:12 AM


Forum Jump