TAP-A-DRAFT: first impression... - Page 3 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > TAP-A-DRAFT: first impression...

Reply
 
Thread Tools
Old 07-12-2008, 02:59 PM   #21
jkarp
 
jkarp's Avatar
Recipes 
 
Jun 2008
Elizabeth, CO
Posts: 2,112
Liked 45 Times on 35 Posts


I always force-carb with my TaD.

I start by chilling the filled bottle for a couple days, and then load up a single CO2 cartridge (empty cartridge on the other side) and give the whole thing a gentle shake for a minute or so. Then I give it another 24 hours before replacing the empty cartridge side with a new one. After 48 hours I start pouring tasty beer and load up new cartridges as needed to keep things flowing. I normally go through 3 or maybe 4 cartridges to carbonate and empty a full TaD bottle.

 
Reply With Quote
Old 07-12-2008, 04:02 PM   #22
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,597
Liked 155 Times on 145 Posts


Sounds much better than the 5L min-keg system I started with. The plastic tap handle broke at the pivot after about two weeks. The replacement lasted about the same.
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 07-15-2008, 03:03 AM   #23
kjbatt
HBT_SUPPORTER.png
 
kjbatt's Avatar
Recipes 
 
Jun 2008
McLeansville, NC
Posts: 17
Liked 1 Times on 1 Posts


I am on my second batch using TAD. The first batch was a wheat beer that was good but had poor head retention. The bottles leaked some when i conditioned them on their side (as recommended by TAD). I just bottled my second batch and have noticed that one of the bottles does not seal well. Will this bottle be ruined? I have ordered some of the white caps with the gaskets for my next batch...

 
Reply With Quote
Old 07-15-2008, 10:42 PM   #24
brewNdrink
Recipes 
 
Mar 2008
Burnaby BC Canada
Posts: 77

Quote:
Originally Posted by kjbatt View Post
I am on my second batch using TAD. The first batch was a wheat beer that was good but had poor head retention. The bottles leaked some when i conditioned them on their side (as recommended by TAD). I just bottled my second batch and have noticed that one of the bottles does not seal well. Will this bottle be ruined? I have ordered some of the white caps with the gaskets for my next batch...
I use the standard black caps on my TAD bottles, but I stand them up, not on their sides. I put 12-15 flat teaspoons of corn sugar per 6 litre bottle for a full carb. So far no leaks. This would be my 5th batch with the TAD. No problems.

You can try the white caps, or just stand them up (like a regular bottle) and there shouldn't be any problems.

Cheers.
Tony.
__________________
FERMENTING: Mexican Cerveza
SECONDARY:
TAP-A-DRAFT: Coopers Stout, Honey Ale


 
Reply With Quote
Old 07-15-2008, 11:00 PM   #25
Brew-boy
 
Brew-boy's Avatar
Recipes 
 
May 2006
Lapeer, Michigan
Posts: 2,280
Liked 16 Times on 13 Posts


I also bought the TAP system before I went to full kegging. I liked it very much and had no complaints except for the caps. I bought the special relief caps the company sells and I was just fine.
__________________
Next:Smoked Pilsner.
Primary:Belgian Red, American Stout w/Roeselare
On Tap:Pale Ale, English Bitter
Aging: Imperial Oatmeal Stout on Vanilla beans.

I rather owe you a dollar than cheat you out of it.."Dad"

http://lapeerareabrewers.com/

http://groups.yahoo.com/group/LapeerAreaBrewers/

 
Reply With Quote
Old 07-16-2008, 10:21 PM   #26
squeekysheep
Recipes 
 
Jun 2008
Greenbay, WI
Posts: 276
Liked 1 Times on 1 Posts


do you just keep the bottles covered with conditioning them. or do they offer colored bottles also.

i can't look them up because the web site is not working
__________________
Battle Axe brewing

 
Reply With Quote
Old 07-19-2008, 03:11 PM   #27
brewNdrink
Recipes 
 
Mar 2008
Burnaby BC Canada
Posts: 77

Quote:
Originally Posted by squeekysheep View Post
do you just keep the bottles covered with conditioning them. or do they offer colored bottles also.

i can't look them up because the web site is not working
It's working now...
http://www.sturmanbg.com/products/be..._dispenser.asp

The Bottles have some protection from light, but not very much. I'd keep them in a dark place for conditioning. I keep mine in my brewing/storing closet.
__________________
FERMENTING: Mexican Cerveza
SECONDARY:
TAP-A-DRAFT: Coopers Stout, Honey Ale

 
Reply With Quote
Old 08-16-2008, 06:00 PM   #28
bergman1118
Recipes 
 
Jul 2008
Asheville, NC
Posts: 197


anybody know a good place to buy one of these? i've seen prices from $50 to $70.. and both midwest and northern brewer are out of these right now..

 
Reply With Quote
Old 08-17-2008, 07:56 PM   #29
ChshreCat
 
ChshreCat's Avatar
Recipes 
 
Aug 2008
Camano Island, Washington
Posts: 11,533
Liked 543 Times on 435 Posts


Not sure if anyone else has done this, but this system seems perfect if you have friends who brew in your area. You each make 5 gallon batches of your favorite brew, load up 3 bottles each, and then trade a bottle. If you have 2 friends, you can each have 3 different bottles of brew to enjoy each time you all run a batch.

I gotta get more of my friends into homebrewing...

agentEhrman Likes This 
Reply With Quote
Old 09-01-2008, 07:49 PM   #30
bergman1118
Recipes 
 
Jul 2008
Asheville, NC
Posts: 197


anybody have a problem of over carbonating? i ordered a TAD system which should be coming in a few days, and was gonna put my ginger saison in it for the first test of the TAD system. my plan was to simply add corn sugar as i would when normally bottling (3/4 cup for 5 gallons) and then conditioning for 3-4 weeks. I understand that you should be able to add as much corn sugar as you normally would when bottling, but I was just wondering if anybody had problems when doing this with overcarbonation or anything? as the faq says:

How much sugar should I use when naturally carbonating with priming sugar?

It is not necessary to use as much priming sugar as you would in beer bottles. You only need to create enough secondary fermentation to give a slight gas pressure...which is enough to preserve and mature the beer. You can make up any shortfall in pressure when you use the c02 bulbs or the n2 bulbs.

they don't really give a good amount to use, just that you would use less than when bottling.


 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
I was under the impression... wildwest450 All Grain & Partial Mash Brewing 15 08-15-2012 10:43 PM
Peoples impression of apelwein at BBQ RodfatherX General Chit Chat 19 06-24-2008 02:07 AM
WB-06 Not Making a Good First Impression Evan! Recipes/Ingredients 6 02-06-2008 08:00 PM
Tap-A-Draft Lochboy Bottling/Kegging 12 11-19-2006 06:02 PM
Built-In Draft Setup / Refrigeration vs. Draft Box Fiery Sword Bottling/Kegging 5 11-09-2006 07:03 PM


Forum Jump