Boil Kettle Dip Tube - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > Boil Kettle Dip Tube
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 03-24-2008, 04:58 PM   #1
Deofol
 
Deofol's Avatar
Recipes 
 
Nov 2007
Posts: 93
Liked 3 Times on 3 Posts



It's nothing special, but I threw this together on Saturday. I was getting sick of whirl pooling my boils, and loosing the extra wort or having to tip my kettle and ending up getting hops and trub in my fermentor during the siphon.



It's a 1/2 to 3/8 compression fitting, and a little finesse with some copper tube.

I did a test run with water and it did an excellent job of getting every last bit of liquid out. First real test brew will be this week.

Anyone else have similar setups or improved ideas?



 
Reply With Quote
Old 03-25-2008, 03:05 AM   #2
slim chillingsworth
Recipes 
 
Feb 2008
Austin Tx
Posts: 310
Liked 1 Times on 1 Posts


i wanted to incorporate a ss braid into mine for filtering hops and other boil ingredients. this is what i came up with:



there was an accidental added benefit to this unsoldered setup. the loose fittings draw a little bit of air into the piping once the water level is low enough, causing built-in aeration. this wouldn't be beneficial for a CFC setup but with my IC it gives works, gives some nice bubbles running into the carboy.


__________________
"I don't understand why everybody is focusing only on details. It is impossible to produce a good beer with details."
Jean-Marie Rock, head brewer at Orval

SERIOUS BUSINESS BREWERY
---serious -mod edit- business---

my commercial beer notes garret oliver on beer and food josh oakes on beer and food

 
Reply With Quote
Old 03-25-2008, 11:21 AM   #3
Grimsawyer
Recipes 
 
Mar 2006
Salem, OR
Posts: 877
Liked 5 Times on 5 Posts


Quote:
Originally Posted by Deofol
It's nothing special, but I threw this together on Saturday. I was getting sick of whirl pooling my boils, and loosing the extra wort or having to tip my kettle and ending up getting hops and trub in my fermentor during the siphon.



It's a 1/2 to 3/8 compression fitting, and a little finesse with some copper tube.

I did a test run with water and it did an excellent job of getting every last bit of liquid out. First real test brew will be this week.

Anyone else have similar setups or improved ideas?

A SS scrubby wrapped around the tip of your dip tube! (HAHAHAHAHAHA!!!!!!! ROFLMAO!!! I crack myself up!!!) No, seriously. You would have the same clearance not to mention the peace of mind that if some hops floated off of the whirlpool cone they wouldn't end up in the fermenter. AND AN ADDED BONUS!!!!! You have a nice sanitized cleaning scrubber handy and ready to go when you are done!!!
__________________
"I feel sorry for people who don't drink. They wake up in the morning and that's as good as they're going to feel all day." -Dean Martin
Quote:
Originally Posted by TheFlyingBeer
...no sense hauling empty carboys around when full ones take up just as much space. :)

 
Reply With Quote
Old 03-26-2008, 04:11 AM   #4
ScubaSteve
HBT_SUPPORTER.png
 
ScubaSteve's Avatar
Recipes 
 
May 2007
New Bern, NC
Posts: 3,676
Liked 83 Times on 57 Posts


Strong work. I think whirlpooling is still a good idea, though. You won't really have to worry 'bout too much hop matter if you use a paint strainer bag, though. Search "Lil' Sparky is tha man!" for a great device.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pickup tube for boil kettle Schmidty Equipment/Sanitation 36 02-11-2015 08:56 PM
Sanitation of a sight tube in a boil kettle Elfmaze Equipment/Sanitation 5 08-12-2009 03:28 PM
suggestions for a cheap sight tube on boil kettle/hlt bscriver Equipment/Sanitation 1 02-28-2009 04:18 PM
Dip tube on boil kettle aekdbbop Equipment/Sanitation 6 01-12-2009 10:24 PM
Pickup tube for boil kettle its02003 Equipment/Sanitation 8 08-26-2008 04:35 PM


Forum Jump